Dacia Logan Air conditioner! How to RETROFIT AC ! Full episode!!!
HTML-код
- Опубликовано: 9 сен 2024
- In today's episode we are trying the IMPOSSIBLE, to retrofit AC to the Shop car!
in fact to install all the posible option! Can it be done? Enjoy 😉
Mail me stuff:
WarpDriveM
(P.O. Box ) Postfach 1107
67583 Guntersblum
Buy merch here: warpdrivem.com...
Ebay store:
www.ebay.de/us...
Hosting service best offerts here: www.admin.ro/a...
Donate: paypal.me/warpdrivem
SUBSCRIBE for new videos !!!
FOLLOW ME on INSTAGRAM: @Warpdrivem
FOLLOW ME on TIKTOK: @Warpdrive_m
LIKE ME on FACEBOOK: / 64zssgpjumefacbk
SEND ME MAIL for a feature in a video!!
Credit: Luis Quintero from Pexels
Credit: www.bensound.com
Credit: ABA GRAPHIC DESIGN
abadesign.ro
#WarpDriveM #warpdrivers #bmw
Nice job! The excitement you're showing when you're successful is priceless! Well done for everything!
I was super excited because I didn't knew if is going to work or not without coding 😅 but yeah huge deal! Thx
Thank you!
Your video helped me to install AC on my 1.4 sandero.
Very useful
Very hard and complex job, but I'm sure that the final satisfaction it's priceless.
Way more work that I've anticipated and I didn't knew if I have to code something but in the end everything is working like factory😊 good luck on your project as well
Do we have smoke, Do we have fire 😂😂😂😂😂😂😂😂😂😂😂😂 so funny! I bet when it’s finished it will be more tidy and better than original from factory
Ha ha is always like this after a big repair . One wrong wire and it can burst into flames 🔥 😅 but is Working 💪
Very impressive. I didn't actually think this was possible!
no doubt about your heavy work on Logan, let me cheers up to you about this tremendous work, but how you wired back and put all together in ?! ha ha ha ha !
Hi, i have installed ac on dacia sandero 1.0 2017 the ac its cold and fine but the engine i feel it not ok the rpm on take off not stable do i need to make software for the car ?
hello guy... Did you made the video that you talked about?
Brilliant job mate! I just have a few qustions if you can help me. I have the exact car, witthout any extra options, is just the base model and I have just installed the mechanical parts of the AC (the compressor, the pipe s and all of this stuff) and I just need to install the electrical part (which I have the all wires from another car with AC). I just want to ask, if I remove the old wires from engine bay and I will install the new one, like in the factory, do I need to change the ECU and UCH? Or I can use the original one (I m thinking that my ECU won t recognise the AC and maybe it will not working), if I need to change the ECU and UCH, do I need to make any coding for the new one s? Thank you in advantage and I hope that you understant what I want to do exactly :)))) Anyway, very good content, keep it up dude :D
If you move everything from the donor car you don't have to code anything it will work, you have to pay attention to the trigger wire that comes from the ac button it might be routed already. You have to tap it before the plug that is in the engine bay (orange in my case) and put it in pin 46 on the ecu as seen at 21:45 and all the lin bus cables from the relais the white ones together on the lin bus knot from your engine harness. Good luck 👍
good job man
but Did I have to remove the radiator to install the condenser, or did you install the condenser from the front of the car?
You have to replace the radiator as well and a water hose because the servo pump is different located and the original water hose won't fit