How To Test All Electronic Components with Multimeter | Resistor Capacitor Diode LED Transistor Fuse

[@dancingoflove]

This video training on testing the basic electric component was so helpful. I learned a lot of good tricks on how to test the components including how to hold a resistor correctly when testing which is something never taught in any academic books. Thank you so much. God Bless you.

[@TechStudyCell]

Thanks for your feedback...

[@akimkwaje5277]

It was wonderful

[@aby_yadav]

Wondering in my 4yrs of electronics engg if they have explained this much would have drawn my intrest many folds.
Bas theory ratt lo aur pass ho jao.😏

[@CornellEvans1]

This is a very clear video with a good explanation and details. As a beginner, I understood everything, and from now on will be confident in taking measurements. Than you!

[@erikcire7809]

This was the course I needed to do all the testing of my power supply TV, thanks very useful !

[@TechStudyCell]

You are welcome

[@aditinagulkar6361]

I am first years electronic diploma student. This information is much applicable for my electronics practical.Thank you sir.🌞

[@TechStudyCell]

All the best

[@pray2002]

Thank you for your sharing. ❤
They're so valuable lessons for me to start repairing bad circuit boards.

[@SANKOHMOHAMED-my6xb]

Very much educative video for electrical Engineering student

[@TechStudyCell]

Thanks

[@felixkwamewiafeakenten-ci6yu]

Thank you for using English for our understanding 🎉

[@fridaymbossoh3109]

This video is helpful I learned Alot from the video

[@TechStudyCell]

Thanks

[@bornodadventureboy2666]

Very very tq..it help us our presentation of our college

[@Icd-u5s]

Wonderfully explained.
Thank you sir.
I learnt alot

[@nedunchezhiapandiannarayan7933]

This is a very good video for a beginner. Thanks a lot.

[@muhamadabia418]

Education is o

[@taz-on-the-looseyusef5526]

wonderful explanation, u are very good at explaining things, i liked this , greetings from Botswana

[@TechStudyCell]

Thanks for the feedback 😊.

[@rosevineargallon9351]

Through this video i gained knowledge, thanks,

[@TechStudyCell]

You are welcome

[@DEmma1972]

Learned so much in so little time. Great vid

[@TechStudyCell]

Thanks for the feedback 😊

[@DEmma1972]

No, thank YOU. Because of your vid I am buying a multimeter tomorrow and hopefully be able to fix my hoverboard

[@abushabibalbalushi5864]

Thank you for sharing it with us and, it was load and clear.

[@TechStudyCell]

Thanks for the feedback

[@salimrajab7668]

This is best sir, am really grateful

[@dinkisaguluma6851]

It's good teaching. Thanks..

[@TechStudyCell]

Welcome

[@robinwells8879]

Very useful and much appreciated Sir. The diode and transistor functionality was a blind spot for me. I shall have to store the video though because my memory chip ain’t what it was! I think that I am quantum tunnelled out😂

[@billypastor6667]

Thaks sir for ur best tuttorial .......

[@TechStudyCell]

Welcome

[@shabirmir9597]

Good demonstration.

[@rabbiisaac5427]

Good job!

[@ifubaraboyerowland8490]

Good instructor thank you so much

[@shpejtimberisha3024]

Thanks for ur tutorial clear and simple👍

[@TechStudyCell]

You are welcome

[@nipunsankalpa9262]

Great job bro keep it up

[@TechStudyCell]

Thanks

[@sakhadarpan]

VERY GOOD Dr Saroj khan

[@TechStudyCell]

Thanks

[@mungelectronics7601]

You guide the inspection of electronic components very meticulously

[@stephenaquila7510]

Sir can i contact any of you?

[@mungelectronics7601]

@@stephenaquila7510 Yes I come from Vietnam. I am also an electrician

[@stephenaquila7510]

Thanks, glad meeting you sir!,am from African

[@stephenaquila7510]

I repairs refrigerators & Air conditions... And most of the new model fridges comes with panels of kinds

[@AKASH-oz5yc]

Thanks for sharing knowledge
Generally practical perpose student watch this video
And also this video is helpfull to performing practicals

[@TechStudyCell]

Thanks for your feedback 😊

[@arnabchowhan3488]

really good
u deserve some more likes

[@TechStudyCell]

Thanks for the feedback...

[@chennasrihari8868]

Good sir explain all components

[@TechStudyCell]

Thanks for the feedback...

[@myrddraal999]

Another wonderful video. Thank you so much for taking the time to make your videos.

[@TechStudyCell]

You are welcome...

[@wanjarishashikant6479]

Very informative video.. great sir

[@TechStudyCell]

Glad it helped

[@udaybhatia4337]

Thanks sir for this one

[@expertofeducation1521]

Thank you so much sir u so versatile teacher.
Love u sir

[@TechStudyCell]

You are welcome..👍

[@loganathanvb6834]

Clear explanation bro
Thank you very much 😊

[@TechStudyCell]

Thanks for the feedback 😊

[@frankdavidson9675]

just a minor tip when testing with your meter and you get an odd reading diff #s hastily twist the selector knob back and forth what this does is clean the contacts in a circle for diff functions in side the meter this works good with analog or digital meters

[@train.sleep.eat.repeat5278]

Very good dude

[@TechStudyCell]

Thanks

[@johnarsenic]

Thank You, Good video well explained

[@TechStudyCell]

Glad it was helpful!

[@shsftech3792]

Nice this video is very helpful..Thank you!

[@TechStudyCell]

You are welcome

[@MEKAVELLI77]

Thank u

[@TechStudyCell]

Welcome

[@missionuluna5837]

Thanks for the video 👍🙏💯🇵🇬

[@lufunolufuno4900]

That was very helpful

[@electronic7979]

Excellent

[@barichoudhury5591]

Very good demonstration. Thanks

[@TechStudyCell]

You are welcome 😊

[@ssennonojohnmary4406]

Interesting ❤❤❤❤

[@sergiopires5724]

u r explanations is beautiful .really i appreciate u r explanations .thank u so much.god bless u

[@TechStudyCell]

You are welcome.

[@adamdavies6248]

Thank you! This was so clear and helpful, really helped me out, many thanks! :)

[@TechStudyCell]

You're very welcome!

[@isahmohammedj5505]

thanks Very much

[@TechStudyCell]

Welcome

[@HosseinAsbaghi-v9e]

Helpful!

[@yohanisseifu8103]

Please show us cpt on its bored with circuit flow and voltage.so that how we measure and figure out the failure from the bored..

[@addictionforphysics8509]

Thanks sir for a good knowledge

[@TechStudyCell]

You are welcome

[@oleezone99]

Thanks a lot

[@kona702]

Wonderful video!

[@TechStudyCell]

Thanks

[@ravindraadapa2952]

good one

[@TechStudyCell]

Thanks

[@gentelmanjunkie542]

excellent

[@nuwanasanga7222]

it was very helpful. thank you sir..

[@TechStudyCell]

You are welcome

[@FiXiT5313]

Helpful video. Keep it up!! SUBSCRIBED!!

[@TechStudyCell]

Thank you

[@FiXiT5313]

@@TechStudyCell Please make a video testing different types of transistor and mosfet too.

[@TechStudyCell]

Already made videos on MOSFETs and BJT testing

[@ninaandsakura]

Helpful! Thanks

[@TechStudyCell]

Welcome

[@maestraamako]

Newly Subscribe. Thank you brother for sharing your knowledge. I subscribe because your speaking English and i understand. Keep uploading video.

[@TechStudyCell]

Thanks for your feedback...

[@gezahegnassefa3801]

it is good Keep up it

[@bigmedge]

This was excellent, thank you so much sir !!! Just 1 humble request : would you be able to kindly make a video showing how to test an op amp with a multimeter ? Thanks again !

[@TechStudyCell]

Ok. Thanks.

[@bigmedge]

@@TechStudyCell sorry to bother you , so do you have a chance soon to make a video about how to test an op amp with a multimeter ?

[@ciararespect4296]

@@bigmedge and a digital piano please

[@aboothahiru6354]

Simple explanation ...Good video

[@TechStudyCell]

Thanks for the feedback...

[@rishabhsinha4590]

Nice video

[@TechStudyCell]

Thanks

[@rammohanschannel649]

Nice sir

[@TechStudyCell]

Thanks and welcome

[@aslamparvej3]

Nice video and also helpfull

[@TechStudyCell]

Thanks..

[@RishedMpey]

Very good

[@yashgupta1633]

Thank you bro

[@idongesithanson7162]

Great and amazing

[@irandoosti]

Thank you so much :)

[@TechStudyCell]

Welcome

[@nalasios5063]

Very nice.... tHanksss alot

[@TechStudyCell]

You are welcome 😊

[@lmcriminals]

Does this work for electronics still in circuit?

[@shis10]

Awsome video Bhai

[@TechStudyCell]

Thanks

[@jeahmaeramirez5382]

Thanks for this video
BIT-CT 2I

[@shivamraaz7398]

Thanks please make more videos

[@chandanigauravpatel1774]

Superb

[@TechStudyCell]

Thanks

[@ramajeyamram4616]

thank you so much sir....

[@TechStudyCell]

you are welcome...

[@GebrekrstosBrhane]

I get ur vidoo very helpfull

[@younggemmycollector]

What if your testing the components on a circuit board and is it supposed to be the same readings as in the video? Because when I go to test my transistors by putting the positive on one side and the negative on the other side they all have a reading and in the video it is supposed to be 1. If it’s good. And I know for sure all these transistors aren’t bad.

[@anthony4312]

If all these components are soldered on PCB , can i test with the multimeter? Is the reading reliable ? Or I must dismantle it from PCB before I test? Thx Tcher

[@TechStudyCell]

No. You have to dismantle first

[@fredsk1]

For those wondering what model of multimeter being used:
Chung Instrument Electronics model CIE 123
www.cie.com.tw/pro_multimeter_120ser.htm

[@maneeshmadhu-u5p]

Thanks

[@BonyRespectclips]

what is the com represent in the multimeter

[@eddiemurigi4581]

It's such an interesting videos so far, great people mahn

[@TechStudyCell]

Thanks

[@gangareddykore6363]

Thanks bro you make more

[@TechStudyCell]

Thanks...

[@rajenderraju7340]

Your given me information we will thanks

[@TechStudyCell]

You are welcome

[@theaffiliate7809]

Nice..

[@joemason9187]

Good learning vid

[@TechStudyCell]

Thanks

[@sanjayasaliya1102]

Thanks sir

[@TechStudyCell]

You are welcome.

[@manikandanvaiyapuri4624]

Nice

[@TechStudyCell]

thanks

[@BBRR442]

Thank you very helpful! Can you also measure relays and transformers?

[@TechStudyCell]

You can test the coil only with continuity

[@rahulsriram7179]

Good

[@MunniBharne-lo4me]

Model neame of multimeter and price?

[@quintoflyer]

thanks

[@daniellopez7819]

What multimeter model you're using

[@nrchikkala]

in my multi-meter i dont have the socket for capacitor , my multimeter is haoyue DT9205A, in this PNP NPN socket is there. pl tell me how can i measure the CAPACITOR with my m.meter.

[@21121953able]

My multimeter gices no sound ,what is the problem ,how to fix it ,help

[@user-enoch-motsosi]

What kind of multimeter is in use

[@kirubababu7127]

In which mode should be set 8n multimeter before checking transistor?

[@pranjay_t]

Correct me if I'm ::--The battery's observed voltage is 9
Then how can it shows 9.4 as measured value.Measured value should be smaller or equal to Observed Voltage not more than that.

[@YaseinAbdi]

9:38 but isn't anode negative while cathode is positive

[@ericpadilla4999]

How Manny symbols are for the diode mode sir ?