4:44 just to say that you tighten a screw. Most of the video is about the other plastics than the mirror itself. Also most cars dont have those plastics and the mirror is loose not from the screw, but from the "joint" it has after that.
Pop it off ball mount, install thick rubber grommet just barley on ball joint and pop mirror back on. They can be found at any hardware store for like 30 cents. Might have to play around with diameter and stiffness to get it to stay.
In certain car applications retightening that windshield screw can and will pierce the glass causing it to break. A Honda Dealership installed a new upgraded auto dimming rear view mirror in my car and that is exactly how they broke my windshield. They did replace my windshield for free over $600.00 for just the part plus installation, so be careful.
JJreal My mirror popped off as I hit it with my shoulder. I tried to force it to “pop” back on but I created 5 spider -cracks, ruining the windshield. Safelite put in a new $600 windshield but would not put the mirror back on. They said they didn’t cover that. How do I get the damn thing back on?
Just fixed a 2006 Rav4 2 wheel drive rear view mirror by pulling the mirror off out of the ball cup directly at the back of the mirror. This mirror had two balls so only the back of the mirror ball was loose. I noticed the cup was cracked in two places making the ball loose. I carefully put construction wire around the cup and fed it out the day night switch space. I twisted the wire with a pliers until the wire was tight around the cup making the cup cracks close. Snip off the ends of the wire so the day night switch works and your done. A tiny bit of grease put in the cup before pushing the mirror back on the ball helps by keeping the plastic from too much ware. Push the mirror back onto the ball. Hope this helps someone.
Some also have a ball socket up behind the mirror that comes loose take mirror off from winsheld glass clean the socket with electronic cleaner let it dry than put some blue Lock Tite into socket let it dry and this works fantastic.
OK I need to know how do I put my mirror back up it did not come it was loose just like that but it came loose from a little circle in the part came out of that circle is plastic how do I put that back up I can’t put it won’t go back in
Even after replacing my irvm there's a blurriness in my view when suppose the vehicle is climbing a slight uphill in 4th gear although it should be shifted to 3rd
My ford escape the mirror bracket is still.on the windshield it seperated from.tje ball where it pivits but nothing is broke how do.i.fix this stupid issue
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
1:32 my OCD jumped to 9000 with that scratch... GOD...
I paused to look at the comments for this.
.....................🤨🙄
lol I had the same
4:44 just to say that you tighten a screw. Most of the video is about the other plastics than the mirror itself. Also most cars dont have those plastics and the mirror is loose not from the screw, but from the "joint" it has after that.
Exactly. I own a Toyota Corolla and the RVM is loose from the joint.
@@gonzalotapia1250 same car, same issue. May be easiest to go to a junk yard and replace the whole mirror
😂 right
Pop it off ball mount, install thick rubber grommet just barley on ball joint and pop mirror back on. They can be found at any hardware store for like 30 cents. Might have to play around with diameter and stiffness to get it to stay.
In certain car applications retightening that windshield screw can and will pierce the glass causing it to break. A Honda Dealership installed a new upgraded auto dimming rear view mirror in my car and that is exactly how they broke my windshield. They did replace my windshield for free over $600.00 for just the part plus installation, so be careful.
JJreal My mirror popped off as I hit it with my shoulder. I tried to force it to “pop” back on but I created 5 spider -cracks, ruining the windshield. Safelite put in a new $600 windshield but would not put the mirror back on. They said they didn’t cover that. How do I get the damn thing back on?
Just fixed a 2006 Rav4 2 wheel drive rear view mirror by pulling the mirror off out of the ball cup directly at the back of the mirror. This mirror had two balls so only the back of the mirror ball was loose. I noticed the cup was cracked in two places making the ball loose. I carefully put construction wire around the cup and fed it out the day night switch space. I twisted the wire with a pliers until the wire was tight around the cup making the cup cracks close. Snip off the ends of the wire so the day night switch works and your done. A tiny bit of grease put in the cup before pushing the mirror back on the ball helps by keeping the plastic from too much ware. Push the mirror back onto the ball. Hope this helps someone.
Many types of grease breaks down plastics. Which one is safe?
Some also have a ball socket up behind the mirror that comes loose take mirror off from winsheld glass clean the socket with electronic cleaner let it dry than put some blue Lock Tite into socket let it dry and this works fantastic.
How does it hold up after 3 months
@@andrewg761 Yes only if your not moving it constantly it will hold up .
OK I need to know how do I put my mirror back up it did not come it was loose just like that but it came loose from a little circle in the part came out of that circle is plastic how do I put that back up I can’t put it won’t go back in
Even after replacing my irvm there's a blurriness in my view when suppose the vehicle is climbing a slight uphill in 4th gear although it should be shifted to 3rd
2:00 I see that you got the bottom TOOKEN apart. Nice work. :-)
My mirror was pulled off the back swivel ball( the one attacted to the windshield. Is there anyway I can get it back on?. 2013 equinox.
Bingo.now you understand how do.i.get the hole. with putout btsk 4:44 ķke
Help trying plug wires back in on the back of onstar mirror when you do installation cause it was disabled that way when my car was stolen please help
your mom
@@tomchillen3039 no your mom
My ford escape the mirror bracket is still.on the windshield it seperated from.tje ball where it pivits but nothing is broke how do.i.fix this stupid issue
Mine is different
tl;dr: tighten the screw
Mine comes right off the base. How do I fix that?
Thanks for the video. It came in handy.
Dude thank you! 😊
Love your vids keep it up
What car is it?
What kind of car is this ?
possible it a chevy cruze, i got same kind of light on top.
yo mama's car
@@frv6610lol 6 yrs later
Hey all if the mirror is loose at the ball joint just replace the mirror they're like $7 at the junkyards
Thank you!!
Glad I could help!
Screw driver does not work ...LOL.
Take ChrisFix advice. Just add a bit of blue threadlocker
😂🤣🤣
Meer
Chris griffin
Bro nice video but you're working on a mirror not a mere
Put a system in there so that mirror will flex hard.
Master mind that’s what brought me here 2 15’s
My shit fell off