one of the best channels on you tube is this guy right here.he works on great stuff, describes what he's doing and can understand him as he talks well!!!lol..
This is why I love your videos, I have a brute kinda doing the same thing but the belt light isn’t on… kind of tired of throwing tons of money in it but now after watching this I feel confident in trying to look into it myself. Thank you for making these videos and being so informative!
Glad the video’s help out. If your brute force is fuel injected and is lacking power but the belt light it’s not flashing you might have a weak fuel pump. Might want to check your fuel pressure.
Appreciate that man but it actually has a new fuel pump and it is the carbureted model. It ran fine then suddenly acted like it was in limp mode but no bell light. Just haven’t had the time yet to really look into it. Very disappointing because I just recently got it back from being at the dealer for 13 months.
@@bradarcher3863could need a carb clean , also if been sitting a lot , check the fuel condition , fuel now days seems to go bad fast , machine will run but lack power and not run good ,
Man I’m new here, so glad I found ya! You’re the person I aspire to be. In all seriousness I could tell immediately you were an extremely honest and genuine guy, keep up the good work!! I’d trust you to work on ANYTHING I have!
Amazing such a small change in shim's can have so much effect on the belt, I've read about changing king Quad gearing to be shorter by shimming sheaves closer together. So punchy, Efi has that instant throttle response, interesting Kawasaki allowed such good response, especially at low rpm, factory like that.
It really doesn’t take much to throw the clutches out of wack.. these things are very punchy, could get a newbie into some trouble if they weren’t use to it.
Loved this video I have a 2005 brute force 750 almost all the same issues with oil leak, fan not kicking on and of course mine is the carbed one so needs a tune but she rips yea my 4x4 was funky too I ended up putting the manual actuator on it that helped it out a lot keep up the good work rock
I don't know why but I've always had a soft spot for the brute force..I had a 2010 360 that had over 12,000 miles when I got rid of it in 2015. Bought it new. Like any machine they all have there quirks but all in all it was very reliable and only ever left me walking once when the clutch grenaded
Wow 12,000 miles is impressive for sure! I’ve only owned 1 prairie 360 in the past and I was impressed with it. It has all the same features as its bigger brothers such as the yellow lever front diff lock.
Yes sir, I put about 2500 miles a year on it. Very reliable machine a bit under powered but it was a good machine for sure. This brute seems to work fairly good for an older machine. Definitely responsive. I like the older sra ones too
I have a brute force with 11k on the dash nothing but pure maintenance keeps them running I change the oil every month I don’t keep track of the hrs but they have been the most reliable machine I’ve ever owned
Adding oil regularly is normal procedure for brutes. ..they consume oil. ..especially on long hot mountain climbs. ..check and top up daily and itll be good
Iam from San Antonio tx I started watching you’re vids before I had atvs now I have 5 brute forces and I love them I have a 2004 2005 2006x2 and 07 750 lots of power I have had Hondas and Yamaha grizzly 660s and they just don’t compare to the vtwinpower I want to see those brute forces you have running hopefully soon
Thanks for watching and supporting this whole time! That’s awesome that you have 5 of these things! I’m hoping to get to mine at some point but customers come first.
Thank for yours videos. The best support channel for ATV issues. If you have a polaris 570 with electrical problems like variations on volts since 14.3 to 15, please make a video of the possible solutions.
Yes , First thing to do with machine you don’t know is definitely check oil , then if driving it , do a brake check is my next thing next thing and throttle check before starting , as I been caught a time or two where customer never mentioned it never had brakes or that the throttle was sticking , lucky I had time and avoided a crash,
Thanks for the comment and glad you enjoy the videos! Now when you say only allowing reverse when the override is pushed down.. do you mean it won’t allow you to move at all in reverse? Usually without the button pushed the limiter will kick in around 3000-4000rpms in reverse as a safety feature. Then when you push the override button it allows full rpms.
Subscribed My 2011 750 backfires horribly when you take off real fast then completely let off the gas any idea why this might be previous owner did put snorkel on it I’ve changed plugs, oils, and air filter no changes
Hi , can l ask u , my trx 680fa rincon fuel injection honda quad 2006 , l replaced the rear relay + airfilter+new fuel pump + new filter kit + new plug + cleaned fuel tank + new iacv + injecter is working correctly, when l start her sometimes she dies out but will start up right away, she is a bit lumpy when give her the throttle, can u figure out why she is dying out + running rough or rich , how to fix thanks
Hello I am looking for by one off these just i can t choose. Between brute force 750 2007 or a sportsman 700-800 2007. Please any advice Thankx Best Regards from Europe Romania
By spacers do you mean thrust washers? Isn't counter effective to remove parts and not change the belt. I can say with snowmobiles a thinning belt is not conducive to good performance
@@rockspowersports yes I do. When I was in college for mechanical engineering one of our professors was adamant that we pronounce it correctly, so it’s stuck with me. Almost everyone says it like sheeve but us in the know say it correctly. Love your videos btw
one of the best channels on you tube is this guy right here.he works on great stuff, describes what he's doing and can understand him as he talks well!!!lol..
Really appreciate that, and so glad you enjoy the channel!
@@rockspowersports heck yeah keep it up
Man, nice straight to the point !
He has to be the best in the world one handed mechanic holding a camera in the other hand. Good video.
This guy needs to be viral prob one of the best mechanic RUclipsrs out there
This is why I love your videos, I have a brute kinda doing the same thing but the belt light isn’t on… kind of tired of throwing tons of money in it but now after watching this I feel confident in trying to look into it myself. Thank you for making these videos and being so informative!
Glad the video’s help out. If your brute force is fuel injected and is lacking power but the belt light it’s not flashing you might have a weak fuel pump. Might want to check your fuel pressure.
Appreciate that man but it actually has a new fuel pump and it is the carbureted model. It ran fine then suddenly acted like it was in limp mode but no bell light. Just haven’t had the time yet to really look into it. Very disappointing because I just recently got it back from being at the dealer for 13 months.
@@bradarcher3863could need a carb clean , also if been sitting a lot , check the fuel condition , fuel now days seems to go bad fast , machine will run but lack power and not run good ,
Love when you work on machines like this
Had BF few years and i still love them. Great video again!
Thanks, glad you enjoyed it.
Man I’m new here, so glad I found ya! You’re the person I aspire to be. In all seriousness I could tell immediately you were an extremely honest and genuine guy, keep up the good work!! I’d trust you to work on ANYTHING I have!
Glad you found the channel and thanks for the kind words!
Love the videos! If I was in Vermont and not living in Maine you would be my mechanic!
Appreciate that man!
The bf 300s are snappy. Surprised me. Great vids
Best ive seen so far great job
Thanks, glad you enjoyed it.
Great job on the Brute … I cleaned the rad on my old 400 prairie in the dishwasher … when the wife was away of course 😊 it did an awesome job.
Pretty impressive doing all that with one hand tied behind your back.
Amazing such a small change in shim's can have so much effect on the belt, I've read about changing king Quad gearing to be shorter by shimming sheaves closer together. So punchy, Efi has that instant throttle response, interesting Kawasaki allowed such good response, especially at low rpm, factory like that.
It really doesn’t take much to throw the clutches out of wack.. these things are very punchy, could get a newbie into some trouble if they weren’t use to it.
Loved this video I have a 2005 brute force 750 almost all the same issues with oil leak, fan not kicking on and of course mine is the carbed one so needs a tune but she rips yea my 4x4 was funky too I ended up putting the manual actuator on it that helped it out a lot keep up the good work rock
I went with the 300. Very simple. Plenty of power. I ride in florida. Deep sugar sand. Never an issue. So far?
Finally some saki content! Love your stuff man 🤙🏻
Thanks, glad to hear it!
I don't know why but I've always had a soft spot for the brute force..I had a 2010 360 that had over 12,000 miles when I got rid of it in 2015. Bought it new. Like any machine they all have there quirks but all in all it was very reliable and only ever left me walking once when the clutch grenaded
Wow 12,000 miles is impressive for sure! I’ve only owned 1 prairie 360 in the past and I was impressed with it. It has all the same features as its bigger brothers such as the yellow lever front diff lock.
Yes sir, I put about 2500 miles a year on it. Very reliable machine a bit under powered but it was a good machine for sure. This brute seems to work fairly good for an older machine. Definitely responsive. I like the older sra ones too
I have a brute force with 11k on the dash nothing but pure maintenance keeps them running I change the oil every month I don’t keep track of the hrs but they have been the most reliable machine I’ve ever owned
Love those brute forces, When 4x4 atvs were made more efficient 😊
The Brute v twin is my favorite twin got a sweet refined sound
Absolutely, always loved the sound of the Kawasaki v twins ever since the Praire 650
Adding oil regularly is normal procedure for brutes. ..they consume oil. ..especially on long hot mountain climbs. ..check and top up daily and itll be good
Iam from San Antonio tx I started watching you’re vids before I had atvs now I have 5 brute forces and I love them I have a 2004 2005 2006x2 and 07 750 lots of power I have had Hondas and Yamaha grizzly 660s and they just don’t compare to the vtwinpower I want to see those brute forces you have running hopefully soon
Thanks for watching and supporting this whole time! That’s awesome that you have 5 of these things! I’m hoping to get to mine at some point but customers come first.
Thank for yours videos. The best support channel for ATV issues. If you have a polaris 570 with electrical problems like variations on volts since 14.3 to 15, please make a video of the possible solutions.
Yes , First thing to do with machine you don’t know is definitely check oil , then if driving it , do a brake check is my next thing next thing and throttle check before starting , as I been caught a time or two where customer never mentioned it never had brakes or that the throttle was sticking , lucky I had time and avoided a crash,
I love my 07 Brute. I put a high performance CDI box,she rips
Im new to the atv world. The bf 300 seemed to be just what i needed. ..... any reviews on them?
I wish he would get a tripod for the camera very hard to watch the videos
First comment love the content what’s your thoughts on an outlander only alllowing reverse with the override button pushed down ?driving me nuts
Thanks for the comment and glad you enjoy the videos! Now when you say only allowing reverse when the override is pushed down.. do you mean it won’t allow you to move at all in reverse? Usually without the button pushed the limiter will kick in around 3000-4000rpms in reverse as a safety feature. Then when you push the override button it allows full rpms.
Won’t let any rpm build until I press the override then it reverses like normal
Speed sensor?
Great video. Thanks rock
Thanks, glad you enjoyed it.
Subscribed
My 2011 750 backfires horribly when you take off real fast then completely let off the gas any idea why this might be previous owner did put snorkel on it I’ve changed plugs, oils, and air filter no changes
Bought two new both cranks went out 3k ish miles no way I’d buy another
biggest problem i see with the brute forces is that they are thirsty af for gas...
lol that’s because everyone drives them like a maniac. I have one and if I don’t ride it like a bat out of hell it’s fine
Hi , can l ask u , my trx 680fa rincon fuel injection honda quad 2006 , l replaced the rear relay + airfilter+new fuel pump + new filter kit + new plug + cleaned fuel tank + new iacv + injecter is working correctly, when l start her sometimes she dies out but will start up right away, she is a bit lumpy when give her the throttle, can u figure out why she is dying out + running rough or rich , how to fix thanks
Hello
I am looking for by one off these just i can t choose. Between brute force 750 2007 or a sportsman 700-800 2007. Please any advice
Thankx
Best Regards from Europe Romania
I put a delete kit on mine . I hate they limit it that slow
By spacers do you mean thrust washers? Isn't counter effective to remove parts and not change the belt. I can say with snowmobiles a thinning belt is not conducive to good performance
The 300 looks to me like a big gy6 engine. Watercooled verticle shaft. .......
On mine the limp mode comes on when the battery gets unplugged. Ended up buying a new belt for nothing after changing battery.
I have a Honda rancher 420 four wheeler
and??
Idk how u do it with one hand id be flipping lol
Arkansas Waven
Please pronounce it shiv not sheeve 😊
As far as I know everybody here pronounces it like I did. Haven’t heard it pronounced shiv before. Do you live in the US?
@@rockspowersports yes I do. When I was in college for mechanical engineering one of our professors was adamant that we pronounce it correctly, so it’s stuck with me. Almost everyone says it like sheeve but us in the know say it correctly.
Love your videos btw
Way too many freaking adds.
You weren't very observant and look over the machines!
Why wouldn’t you put on a new belt as long as you had the primary’s off?