Hi. The easy way is to put a couple of drops of WD-40 were the button enters the case. It will not damage the module. If the orings are ok it will do, if not you will need to replace them. Let me know if it fixed it for you. Best regards.
@@BADYSNIPER I tried fixing the button but i realized that it was not an original piece sadly, it was a bit smaller than the rest of the buttons. So that must be where the problem lies. Thank you though for your advice.
DO NOT USE WD-40!!!! OILS LIKE THAT WILL DRY OUT THE RUBBER SEALS THAT KEEP IT'S WATER PROOFING! If you don't have access to a proper lubricant used in watches,the ONLY thing you should use is white lithium grease. I've used wd-40 and it not only dries out the rubber but gums it all up and makes the buttons harder to push
Use a needle to on the battery hold down bar. U WILL crack the casing if you're not careful and I HATE having to fixing that when for u guys break it
Hi Paulo i have a question about my DW 6600. My adjust button is pushed in and is hard to press. I was wondering if it is an easy fix to do it myself?
Hi. The easy way is to put a couple of drops of WD-40 were the button enters the case. It will not damage the module. If the orings are ok it will do, if not you will need to replace them. Let me know if it fixed it for you. Best regards.
@@BADYSNIPER I tried fixing the button but i realized that it was not an original piece sadly, it was a bit smaller than the rest of the buttons. So that must be where the problem lies. Thank you though for your advice.
The adjust button is supposed to be smaller and pushed in. It’s supposed to be hard to push. This way you don’t mistakenly do it.
@@BlissTV_Channel yes I figured that out after a while. thank you!
DO NOT USE WD-40!!!! OILS LIKE THAT WILL DRY OUT THE RUBBER SEALS THAT KEEP IT'S WATER PROOFING! If you don't have access to a proper lubricant used in watches,the ONLY thing you should use is white lithium grease. I've used wd-40 and it not only dries out the rubber but gums it all up and makes the buttons harder to push
what is wrong with your camera
There is literally nothing there to restore. Good luck. LOL
The module was only able to use some parts, but the housing and the light button I used in another restoration.