How To Cut A Microwave Wave Guide Cover From A Mica Sheet

Поделиться
HTML-код
  • Опубликовано: 2 фев 2025

Комментарии • 35

  • @johnericksen5359
    @johnericksen5359 9 лет назад +5

    Awesome guys. I was about to buy a new, built in microwave for £250 (as mine was sparking) until I saw this clip. I thought at £2.49 I didn't have a lot to loose, so I ordered a piece of Mica from buymystuffshop,it arrived 36 hours later, cut it to size as per the video and hey presto, a fully functioning oven. Superb, thanks.

  • @winthropwilliams2085
    @winthropwilliams2085 11 лет назад +2

    Works! I just cut a mica sheet from Pastime Ace Hardware (their part number 400042 for $3.95). I cut mostly with scissors (yes, scissors can cut rock sometimes, so much for "rock paper scissors!") and finished one notch with a hobby knife, thus creating a part that is shaped like my original, which in my case is the shape of a Sharp PCOVPB085MRP0 Wave Guide Cover. Curiously, my home-made cover is more see-through whereas the original looked more silvery-opaque. However that difference doesn't seem to affect function. Thanks for the encouragement to try this fix on my own rather than ordering & waiting for the part.

  • @MrJackdanblake
    @MrJackdanblake 11 лет назад

    Awesome vid, Thanks. Simple stuff, but good to be shown the first time. Takes the guess work out of it before you start cutting.

  • @RealistReviewer
    @RealistReviewer 8 лет назад

    Getting it back in there is the fun part.

  • @ruchika5502
    @ruchika5502 5 лет назад

    Where do I get the locking pins to lock this wave guard in place?

  • @Mentorcase
    @Mentorcase 10 лет назад +1

    Nice informative video.

  • @arshfiroz154
    @arshfiroz154 Год назад

    Can we use a bent mica sheet ?

  • @lindachen2188
    @lindachen2188 10 лет назад +1

    Thank you for doing it.

  • @bassambassam8081
    @bassambassam8081 4 года назад

    Thank you

  • @Sycogrim
    @Sycogrim 7 лет назад

    Hey mate, with the covers themselves, are they designed specific to the brands? I have a whirlpool convection which I'm replacing the cover, but I don't want to just go out and source a new one if it's advised to get them directly from whirlpool. Thanks in advance

  • @patpetraska5411
    @patpetraska5411 3 года назад

    How can I order this through the United States

  • @markgoulding6316
    @markgoulding6316 9 лет назад

    Thanks, just wondering if there is a front and back to the card or can the replacement card be cut and fitted either side out?

    • @buymystuffeshop
      @buymystuffeshop  9 лет назад +1

      Mark Goulding There is no front and back. It can be fitted any way round.

  • @rolandosenio3730
    @rolandosenio3730 3 года назад

    Thanks man..where can i buy that cover sheet

  • @lacylacy421
    @lacylacy421 8 лет назад +1

    EXCELLENT !!!!

  • @zeffur7
    @zeffur7 8 лет назад

    What is the thickness dimension of your mica sheet??

  • @HersitO
    @HersitO 11 лет назад +1

    Is there any hazard in usung the microwave withoute that cover, mine broke and I kept using it without it.

    • @buymystuffeshop
      @buymystuffeshop  11 лет назад +3

      Not as such however food must be kept covered. Fat splashes or moisture can enter the wave guide duct and if they come in to contact with the magnetron antenna they will be vapourised or burnt. This burning can damage the magnetrons antenna.

    • @Giovanniram22
      @Giovanniram22 10 лет назад +1

      buymystuffeshop
      Hi.
      How we can understand if the magnetron antenna is broken? It will not make hot the food anymore?
      I have an oven that because of spoons or forks inside, the mica sheet burned and I use the oven more than 2 years without a new mica sheet. 7 months ago because the front time button was broken, I opened the oven and in order to reach the front button I put aside the magnetron and I saw that its tip was melted at one angle. Until now the oven is working ok. Today I ordered also a new mica sheet to put inside (after more than 2 years it was time). What is your opinion? Is it safe to continue use the oven (with the tip of the magnetron half melted) or is it better search for a new oven?

    • @paulinbrooklyn
      @paulinbrooklyn 9 лет назад

      +Giovanniram22 çcç

    • @graham8430
      @graham8430 4 года назад

      @@Giovanniram22 Just what I was thinking... after sparking I did notice some metal deposited on the inside of the mica cover... scraped it off and all worked ok... for a while!? So I ordered a biggish sheet of Mica from espares in Birmingham UK who were just grrrreat!

    • @Giovanniram22
      @Giovanniram22 4 года назад +1

      @@graham8430
      Well, after all these years the over still works just fine. After fixing the mechanical timer button I can bet that it will work forever.

  • @MrAllancord
    @MrAllancord 10 лет назад +3

    can i use and cut a microwaveable plastic container as cover?

  • @hasteya
    @hasteya 6 лет назад

    Thanks...woulda bought from you but a'ready ordered. Too bad.

  • @NomathembaElsie
    @NomathembaElsie 7 месяцев назад

    I want the transformer of a microwave

  • @mysticalsparkle5767
    @mysticalsparkle5767 9 лет назад

    are you irish

    • @jimg7423
      @jimg7423 2 года назад

      Going with Scottish

  • @pedrotapia7772
    @pedrotapia7772 4 года назад

    Too much talking, should just go to the point

    • @josepeixoto3384
      @josepeixoto3384 2 года назад

      i was thinking the same,mas is addicted to lip service