I fly all my FPV aircraft with 2.8mm lens! It's better for fast FPV flights :) Very nice little setup! The quadcopter flies really good! Great job and happy sunday
holy crap that looks fantastic. BUILD VID PLS How much for the entire quad build broh? I'm almost set on buying the nighthawk 250, but I'm for sure gonna build myself one of your micros.
your mini quad out preforms so many bigger quads its insane.. i almost regret getting my 250 watching this - loved my 230 and iv been eyeballing 100s - i have just got this cam to go onto my 250 as im not happy with my current colours either but it may be info overload with my home made goggles and such a wide angle lens, i may misjudge a gap or two, i will see if i can swap it with the Aomway Mini, if possible
lykenth08 i think a 250 size quad has much better punch for gaining height, this might be something you miss if swapping it for something smaller. I just love the small form factor for its ability to fly indoors but also be pretty stealth. the amount of people who gather around me when i fly something big ruins a lot of videos. doesnt happen with the micros. they all have a place though :)
well after watching your video i bought this camera and stuck it on the 250, it just looks like a lens sticking out the front the board is so tiny and thin. you may like the new CPPM Only receiver by hobby kind, its incredibly small but capable of a decent range.
+AndyRC i dont mean to spam you mate but here is the name of the new tiny CPPM only receiver - i think you will be impressed OrangeRx R616XN DSM2/DSMX 6CH CPPM Nano Receiver with Failsafe
its mostly form factor/ weight and it being a dedicated CPPM receiver - far as i know its the first of its kind for lager craft. there is some gripe about it not having diversity antennas but i see that as give and take.
+Oliver Raja-Brown i usually use picnicquads frame but this one was custom built for me by a guy named phil in the micro group on facebook. join up and ask for him. he might make u one ;)
Hi Andy, just brought this Mini 600TVL Micro 1.8mm, will this camera work with a 3.7v lipo battery looking to connect straight to it for fpv? been told i need a 4pin male plug for the 3.7v battery converter maybe?
I watch all your videos. Thanks for all the understandble tips. I build a micro based on another youtubers recommendation, the H8 with FX758-2 5.8G 200mW 32CH FPV Wireless Audio and the same camera you use in dthis video. Problem is not the picture. Its perfect but when adding throttle picture goes from "snow" to "no signal" Ant ideas why? I,m aware of that brushed motors makes a lot of noice, but yours seem to do all right? Something I have missed? Thanks in advance!! Mike
the scisky has a built in regulator that filters out noise from the motors. the h8 does not you need to add one in the middle such as polulu or fpvhobby
Like this one? www.fpvhobby.com/233-5v.html None og the egulaters talk about noise reduction. How can you tell what regulater does what, and does it matter if you send 3,3 v in and draw 3,3v out when the regulater is bult to handle a lot more volts? Thank in advance,
yep thats the one it acceps 3.3 - 12 in and produces 5v out of every outlet. make sure u place it away from the fpv gear as regulators produce RF noise themselves but not down the wires just when in close proximity.
+AndyRC I'm not looking into doing it I was just wondering, like if it was for doing good reviews on them with several thousand views or anything like that
I´m looking very much forward ! BTW, I´m just starting getting into FPV, and I will be following your instructions, so thanks for your brilliant videos !
J.JONES RC in about 4 mins a video is coming to show exactly what u need to do. as im a one man show I dont have the capacity to build, also the time it takes to make one would mean Id have to charge way over the odds which isnt fair on anyone.
Nice, I've used a similar camera, but I didn't get anywhere near this quality. I'll be laser cutting a few frames soon, send me a PM and ill send you one for nowt, I've enjoyed and learned from your micro FPV, consider it a thank you.
What VTX are you using? Do you think something like this could be spliced into the line as well? www.flytron.com/thermal-cameras/303-dronethermal-micro-uav-thermal-camera.html I am trying to do a proof of concept for a micro aerial thermal camera setup, and have built some micro FPV setups using all-in-one cameras, and bigger setups with component FPV gear, but never a micro FPV with component gear.
i dont like it to much fov dont get a good distance judgement so i still like fpvhobby 1gram better i fly acro inside they should have 3 ore 2 different lens options you can buy then i would like it
Mine arrived this week. I'll be putting it into my indoor quad. The wide angle will really help indoors
S Rob yes its good for indoors. the next video shows indoor footage cheers
It Irked me when you tapped the lens glass with your finger lol. good proximity flyin
I fly all my FPV aircraft with 2.8mm lens! It's better for fast FPV flights :)
Very nice little setup! The quadcopter flies really good!
Great job and happy sunday
ABMNS PRODUCTION thank you and happy sunday :)
Thanx for the video brotha. I have 2 of them comming in the mail. 👍😊
Another great review. Thanks Andy
MrPnew1 thanks for watching :)
holy crap that looks fantastic. BUILD VID PLS
How much for the entire quad build broh? I'm almost set on buying the nighthawk 250, but I'm for sure gonna build myself one of your micros.
madskillz1o1 build video is already done and is after this one :) check out the alien video for the quad :)
got me bit dizzy but nice flips. just ordered one, the price is insane.
***** apologies, I got carried away!
your mini quad out preforms so many bigger quads its insane.. i almost regret getting my 250 watching this - loved my 230 and iv been eyeballing 100s - i have just got this cam to go onto my 250 as im not happy with my current colours either but it may be info overload with my home made goggles and such a wide angle lens, i may misjudge a gap or two, i will see if i can swap it with the Aomway Mini, if possible
lykenth08 i think a 250 size quad has much better punch for gaining height, this might be something you miss if swapping it for something smaller. I just love the small form factor for its ability to fly indoors but also be pretty stealth. the amount of people who gather around me when i fly something big ruins a lot of videos. doesnt happen with the micros. they all have a place though :)
well after watching your video i bought this camera and stuck it on the 250, it just looks like a lens sticking out the front the board is so tiny and thin. you may like the new CPPM Only receiver by hobby kind, its incredibly small but capable of a decent range.
+AndyRC i dont mean to spam you mate but here is the name of the new tiny CPPM only receiver - i think you will be impressed
OrangeRx R616XN DSM2/DSMX 6CH CPPM Nano Receiver with Failsafe
someone else has actually sent me this link and i ignored it lol. what are the benefits over the r100? thx
its mostly form factor/ weight and it being a dedicated CPPM receiver - far as i know its the first of its kind for lager craft. there is some gripe about it not having diversity antennas but i see that as give and take.
Hi Andy. Please can you do a review of Alishanmoas tilt quad racer?
KREEPYKRAWLLY ask him to send me one in and I will do it for sure :)
Great video Andy.. how does it do in lowlight? Thanks!
Johnny TSC video up next covers that. Can be used in very low light not quite as good as the fpvhobby camera but very close!
Awesome, where did you get the rest of the items? Receiver? vtx? etc?
+Alexander Roelofs its in the video after this one cheers.
HII and thank you.
HOW it compare with Runcam nano 2 ??
in picture quality.
Hi i have been watching your Chanel for a while now and only just subscribed.
One question what frame are you using
+Oliver Raja-Brown i usually use picnicquads frame but this one was custom built for me by a guy named phil in the micro group on facebook. join up and ask for him. he might make u one ;)
thats an 160 frame?
Nice camera Thanks
Hello Andy I am building 3 95mm quadcopters for my kids for Christmas what micro camera AIO would recommend thanks much!!!!
+Hairy Hider go with the fx797t cheers
Hi Andy, just brought this Mini 600TVL Micro 1.8mm, will this camera work with a 3.7v lipo battery looking to connect straight to it for fpv? been told i need a 4pin male plug for the 3.7v battery converter maybe?
it should do cheers
I watch all your videos. Thanks for all the understandble tips. I build a micro based on another youtubers recommendation, the H8 with FX758-2 5.8G 200mW 32CH FPV Wireless Audio and the same camera you use in dthis video. Problem is not the picture. Its perfect but when adding throttle picture goes from "snow" to "no signal" Ant ideas why? I,m aware of that brushed motors makes a lot of noice, but yours seem to do all right? Something I have missed? Thanks in advance!! Mike
the scisky has a built in regulator that filters out noise from the motors. the h8 does not you need to add one in the middle such as polulu or fpvhobby
Like this one? www.fpvhobby.com/233-5v.html None og the egulaters talk about noise reduction. How can you tell what regulater does what, and does it matter if you send 3,3 v in and draw 3,3v out when the regulater is bult to handle a lot more volts? Thank in advance,
yep thats the one it acceps 3.3 - 12 in and produces 5v out of every outlet. make sure u place it away from the fpv gear as regulators produce RF noise themselves but not down the wires just when in close proximity.
Thank you for rapid answer. Away from fpv gear - a little difficult on a H8:-)
it is doable ;)
How did you get to the point where banggood are sending you products to review
I spent over 5 grand in their store
+AndyRC wow haha, I was just curious as I had seen others who are also getting free stuff from them
+Ali Cooper you have to spend a lot with them and also make videos of the products (not why I do it) and then have a few thousand subs
+AndyRC I'm not looking into doing it I was just wondering, like if it was for doing good reviews on them with several thousand views or anything like that
You were not receiving the image from the camera in real-time, were you?
Tibia Videos I am standing in a field with goggles on my head and flying the quad in real time yes ;)
Hi andy can you do how to bind turnigy rx9 pls?
muhammad afiq there is some out there already, or do you mean binding to alien wii?
ruclips.net/video/qryfj3VsznQ/видео.html
bom vídeo Andy
+RC DRONES thank you :)
great video thanks! will order one very soon!
Morten Kristoffersen you will be impressed :)
I´m looking very much forward !
BTW, I´m just starting getting into FPV, and I will be following your instructions, so thanks for your brilliant videos !
no problem thanks for watching
would you recommend this for a 250 quad?
+luc weghorst i cant see why not. it works really well and is lightweight
Can you make me one of your FPV plates please??
J.JONES RC in about 4 mins a video is coming to show exactly what u need to do. as im a one man show I dont have the capacity to build, also the time it takes to make one would mean Id have to charge way over the odds which isnt fair on anyone.
Ok I will watch your videobtjen and copy you. P.s. are you show where to get the bits from on your computer?
iv put links in the description the video is up, go check it out :)
Ok
Nice, I've used a similar camera, but I didn't get anywhere near this quality.
I'll be laser cutting a few frames soon, send me a PM and ill send you one for nowt, I've enjoyed and learned from your micro FPV, consider it a thank you.
nosstar83 oh cool I love to try new frames PM sent!
What VTX are you using? Do you think something like this could be spliced into the line as well?
www.flytron.com/thermal-cameras/303-dronethermal-micro-uav-thermal-camera.html
I am trying to do a proof of concept for a micro aerial thermal camera setup, and have built some micro FPV setups using all-in-one cameras, and bigger setups with component FPV gear, but never a micro FPV with component gear.
+BuckeyeStorms yes it can but not at that price for me! let me know how u get on!
i dont like it to much fov dont get a good distance judgement so i still like fpvhobby 1gram better i fly acro inside they should have 3 ore 2 different lens options you can buy then i would like it
+8alakai8 you can change the lens easily since it is an m7
do you know a 120 fov lens that would fit
yes the 808 16 lens fits
thanks