Cleaning Paintball Tank Regulators
HTML-код
- Опубликовано: 2 июл 2024
- If you want to have your question answered leave a comment below or use #PBQT on Instagram, Facebook or Twitter.
➡ Auggie Lo - How often should I clean my tank reg? I need maximum consistency.
That depends...I think that a good rule is every 50,000 shots on the regulator is about when you should think about greasing and changing o-rings. This isn't always the case though, if you play in sand or somewhere that is humid, you may have to service more often.
➡ inphrit - does having a SLP regulator on your tank affect the fps on the gun?
Yes and no. If your maker operates at 700 PSI like some of the Tippmann's, then the super low output pressure of the SLP reg will not work. On markers like the Emek though, that work at under 150 PSI, the 300 PSI form the SLP reg would work fine.
➡ Michael Haller - I just got a red GI Sportz 68/4500 tank, and as looking at aftermarket regulators do you think the Powerhouse regulator is worth the money?
Powerhouse Regulator Gen 3 Haymkr 500 [Overview] - • Powerhouse Regulator G...
-My Paintball Gear-
Planet Eclipse Emek ➡ amzn.to/2SWAjRj
Ninja SL2 77/4500 ➡ amzn.to/2rUBSUb
Virtue Spire III ➡ amzn.to/2AyCV2N
Vforce Profiler ➡ amzn.to/2qOJGUL
Bunker Kings Supreme Harness ➡ amzn.to/2qN4H2U
More Paintball Gear I Like ➡ www.amazon.com/shop/paintball...
-PaintallRuinedMyLife Stuff-
Merch ➡ www.paintballruinedmylife.com...
Instagram ➡ goo.gl/SSZzpV
Facebook ➡ goo.gl/RtJsDQ
Discord ➡ / discord
Community Guidelines ➡ pbrml.com/community-guidelines
#Paintball #PBQT Спорт
Happy to see PBQT back. I say keep the intro, unless you feel like it's not right anymore.
You have to keep the intro. I wake my kids every Wednesday to a PBQT intro.
Dirty fills can wreck havok on your set up! I was first to fill on a portable self fill station at the West Point Combat Classic this past spring. The calcium in the lines completely destroyed ALL of the seals in my F1 G6r Ripper, then caused my emek to go down immediately, after I unknowingly aired it up with the same calcium filled bottle. I was able to revive the emek with full maintenance to play that day. I had to send in my ripper to Yosh at F1, he completely gutted it and replaced the internals. I was lucky that F1 has the Best customer service I've experienced in paintball.
What is f1?
The intro is so paintball..it can never go away at this point.
Keep the opening!
I LOVE your PBQT intro! Those are some of my favorite intros that you do and are extremely memorable to my mind and to other folks that I've introduced to your videos. I always look forward to the PBQT videos to hear you perform those intros!
So glad to finally have these back
Thanks for bringing back PBQT!
Best part of youtube is back, PBQT
Ayyye pbrml! Thank you for everything that you do!
LOL! The way you say paintball question time here reminds me of me talking to my dog. I love your videos!
Yeah PBQT!!! We love the intro and miss the regular pbqt snippets. My 3 yr old even stopped saying paintball question time cuz you haven't had one in so long!
#PBQT !!! Finally it’s been a while and please keep the intro
Please keep the intro my dude, I love it!
Brad you should do an video where you question fields on how they design their fields and maintain them for both woods ball, hyper ball, speedball. Just ideas. Dude keep these coming
Thanks fir answering my question!
You are proof that I don't just make the questions up 😜
YES, blimey it's been a long time
You always have the best songs for the intro (old school Nirvana) man I miss the 90s!
I miss the music, other than that I'm good 😃
Paintball Ruined My Life I don’t know man, I still get urges to throw on a turtleneck and watch Friends
Dude!!!! I fucking love and miss that intro!!! Iiiiiiiiiiiiiiiit's paintballquestiontime!!!
Let's gooooo #pbrml
I dont knownif it makes sense, but I ran an slp on my etha 2 for a couple weekends(have one for my airsoft guns) and noticed inconsistent streams and it sort of seemed like the slp reg couldn't keep up with the air required.
Any long term reviews on the First Strike Standard Carbon Fiber Tank?
Opinions on how it doesn't have an expiration date?
Never thought I would hear good clean air, no pollutants and California all in one sentence...
😂
So I’m having so much trouble about my new empire/pure energy tank. On the manual pamphlet it came with it says that there is a low pressure kit available but not included and tells you how to install it and all. There’s no part number mentioned for the low pressure kit on there, but on ANS they have a pure energy low pressure kit which looks like it will work. Have you ever seen this? The reg on my tank looks like the basic regs your mentioned. I bought it because it’s 8 bucks, so I’ll see if my preset hpa tank can really be adjusted down to 500 psi.
I never cleaned my reg. It’s still a little unknown to me. What greases are silicon based??
I’m new to this what does it do if you lower the pressure on your regulator
#PBQT why does paintball mainly focus on tournament style playing instead of rec? For instance majority of paintball guns are marketed for tournaments than rec play.
#PBQT What are your thoughts on the 2020 NXL Fields?
#PBQT will firing my mini gs with the power on and eyes off wear anything in the gun out? Dry firing with air off vs with air on?
Some paintball markers run like garbage when new because all o-rings are stiff AF & things are catching after you shoot them few times the grease oil gets spread were it needs to be & o-rings are not so rigid FS 15 has hugh problem with this.. another thing is velocity & regulators actually have to be re-calibrated every so offen as it gets warn in -to> warn out over time
I’m a snake player and what pants do you think are the best for water and mud #PBQT
#PBQT Can you do a video on testing a tank's regulator recharge rate?
I have wanted to for years. The cost to build a machine to test recharge rate is far out of my price range though.
Ok so what type of regulator would i need for a cs2
#pbqt Do you think first strike rounds will become more affordable in the near future? If not, are there any other companies planning on manufacturing first strike style paintballs?
First Strikes will probably stay the same price until someone can make a cheaper competitor. As far as I know, MCS is the only company trying to make a shaped projectile and there hasn't been any updates on that in a long time
I come back for the intro...
Hey Brad
I started playing about ten years ago and am getting back into it after a couple years off. I have a Spyder Imagine and Smart Parts Ion. The issue is they are old and it’s starting to show with reliability. Should I just do the repairs or sell them and cough up the money for a new gun? If show what would be a good next Gun?
Thank you!
Well I think you should give him a price point that you were looking at. There’s a wide range of guns and prices that go with it.
Pe recommends 650 psi for most everything
I’d never recommend replacing orings as a matter of habit. Replace seals when they need replacement, never before.
I dont care much for th)e SLP . while I did get good consistency over the crono 1 shot at a time, I also got the same consistency itha mid range output of 550psi, and I als noticed that when I used the slp tank on any of my markers including 2 victories in the past, I would get a drop in fps after the first shot during rapid fire. If my marker was set at 290fps, and I began to ramp, the first shot would comeout at 290fps, but every shot after would be in the low 280's untillI ceased the rapid firng.As soon as I switched to an adj reg and tested the outputs from 300psi, to 450psi, it still had drop in fps after the 1st shot, but when I increased my output to 550psi, the drop off stopped and all my shots during rapid firing crono'd around the 290fps i had it set to. This happened with my 2 victories, dm9, and insight. As soon as I switched to 550psi outpu0t, all these markers crono'd consistently at all times.
SLP was a gimmick and never improved performance for BL guns over your standard mid range pressure regs.
@@beasly10 truth.....
This channel has evolved? Blasphemy! I hated the intro forever, but these days it just feels like a good pair of jeans. For kicks i'm replacing that boiler plate cheapo-china reg with an old Center Flag 420. Won't make any difference except I think the 420 is a little lighter.
Think ppl just looking for make something more complex then it realy is. You got your tank with reg and its work fine? Why bother changing reg?! What you will acomplish? Shoot 17 more balls of that tank? How often clean reg? Works fine? So why? Just take your equipment and have fun.
alternately, it highlights the fact of some players reallllllly wanting to spend money and tinker with their stuff, to the point where they'll drop over a hundred dollars on the prospect.
g5 spec r or fusion elite somone pls help
If I had to pick between the two, id go with the Fusion.