How to Clean HK Army Regulator (Basic Regulator) - Service & Maintenance

The HK Army Air Systems are available with two regulator options, one being the standard regulator and the other being with their high end Aerolite regulator system. Both regulators need to be cleaned and serviced at least once a year. John shows you how to break apart the standard regulator and what to look for when you're in there servicing it.
🔥GIVE AWAY🔥 ORDER YOUR 100% FREE PRO EDGE STICKER 4 PACK TODAY! ow.ly/9UT930r4vRo
Shop All of Our Paintball Regulators here:
proedgepb.com/collections/pai...
Shop Our HK Army Paintball Tanks Here:
proedgepb.com/collections/hk-...
If you have any questions or need any additional help reach out to our store anytime at 713-896-8841 or email John directly at [e-mail]

[@elivessels3262]

The O-ring on the piston broke on mine and I'm looking for a replacement O-ring so I can use the tank again, but I've looked online and I can't find anything, what should I do?

[@llamudos9809]

Can i verify that you used Eclipse grease for the orings?

[@ProEdgePaintball]

Yes you are correct!

[@milesgauthier3541]

The fill nipple on mine is leaking... seems like there's a squashed o'ring that needs to be replaced on the internal valve... do you know what size? (It's too squashed for me to measure).

[@ProEdgePaintball]

We do not know what size the o-ring is but we do carry the whole pin and o-ring assembly as one piece. Please reach out to us at our store and we can see about getting one sent out to you!

[@jordanstaples8685]

Such a helpful video thank you. Can you do the Powerhouse Reg as well soon?

[@sodacanassassin]

ruclips.net/video/9eenCm8vWdQ/видео.html

[@ProEdgePaintball]

Check out the link below!

[@stovlsuzuki]

Can the ASA portion on this regulator have it's orientation changed for people who use tank stocks? I've got a 13/3000 hk tank

[@ProEdgePaintball]

Unfortunately no it cannot be reoriented. Some regulators that be can are the Ninja Pro V2 and V3 regulators, any Powerhouse Regulator, and HK Aerolite 2 Pro Regulator.

[@badjuju98]

Is the output adjustable on these regs if I remove some of the shims? Thanks

[@ProEdgePaintball]

It will depend on which HK Army Regulator you are talking about but their base model regulator is not able to be adjusted.

[@poseidonairsoft5783]

So if u press it nd no air comes oit that means it empty right?

[@ProEdgePaintball]

Typically if you can manual press the pin the pressure is very low or the tank is empty. Always check the gauge as well if you have a compressed air tank, there is no gauge on a CO2 tank and unfortunately you cannot install a gauge on those tanks either. If you are ever in doubt and need to make sure your air tank is empty take it to your local shop and someone there can verify that it is empty for you.

[@noOnesafe007]

Would you guys do giveaways

[@ProEdgePaintball]

We will sometime this year!