Great chanel with great guy hope you get grow more then you think .so for that you have to work more hard .keep continue with this try some thing more interesting ok
I have the same problem. It doesn't work when you press the power button, but when you press two buttons hard, it works as if you press the power button, if you turn it on or off. Did you solve the problem? I disassembled and looked at the button, but the button was working without any problems. However, initialization did not solve it either.
Aslamu alikum sir nice job meri watch 2 months off thi but ubi charge nahi ho rahi ur on ho rahi hai apne jo btaya data cable lgao wo kaise lagy gi please help me
Thanks for the good video. Can I ask a question? 1. Are you soldering one end to the leftmost terminal of the flex cable(4:10) and the other to the power button terminal(4:25)? Are there only two parts to be soldered? 2. And I am curious about what mm the thickness of the copper wire is.
Essentially he is jumper wiring the power button. 1. Look at ruclips.net/video/ZTor4meURO8/видео.html, solder a wire to the left most contact of the flex cable. 2. Look at ruclips.net/video/ZTor4meURO8/видео.html, solder other side of the wire to the power button. I did not desolder the button like he did, as there is enough surface area to attach it. My watch had some water damage, it went into a rebooting loop. So after disassembly and drying it in rice for 2 days it wouldnt turn on. When put on the charger, as soon as the display went dark, it would only react to the back button (screen came back on) but not to the power button. So before ordering a new flex cable I thought I might try this solution and my watch is working again. Thank you very much Mobile Doctor!
For my experience I can say that it can be faulty power flex cable. I had this same issue and there was no help from opening and drying the watch. I bought a new power flex cable and problem fixed. It is over 3 years old watch.
Cristhian mañay como lo hiciste ? la verdad el no muestra el procedimiento sera q usted puede guiarme o hacer un video tutorial para reparar mi s3 frontier tiene el mismo problema solo enciende colocandolo en la base de carga
Hi Brother. My s3 frontier motherboard need to replace. Can u please advice where to go for reparing and fix problem apart from Samsung service center. India , Lucknow UP.
Bhai can you share your number.. meri watch samsung care mai 2 month se padi hai or un gadho se kuch nai ho raha hai.. please koi contact ka mode dena..
Sir meri watch ka touch kaam nahi kar raha hai aur same day se battery bhi 10-12 ghante se jyada nahi chal rahi full charge par. Jabki pahle 2-3 din aaram se chalti thi. Iska kuch kar sakte hai kya ? Kai baar restart karke aur reset karke bhi dekh liya kuch nahi hua.
@@earthyfacts it just stopped working, won't charge turn on or anything, the dock just blinks red , I've replaced the battery just 3 months ago so I know it ain't that
There is a much better way to repair the power button. Just order a new flexible through Ebay from China and solder it in. Was not really difficult with the right tools.
Yrr bahi mery pas b s3 frontier ha..... aik baar giri ha sirf back glass pr crack aaya aur tb sy chal ni rai.... mein ny data cable waly poles pr b power dy kr try kia ha lakin on ni ho rai........ mujy btain k koi chance ha sai hony ka..... ap mujy apna whatsapp num. Be dy sakty hen...... help krin yr bahi thori
Looks like he jumped the positive side of the cable to the positive side of the power switch. My galaxy watch smr805 is bricked in reboot loop. Im trying this.
Thank you! I just did this. I tried the wire method like the video but that did not work. So I removed the resistors and then bridged the connections with solder. (Replaced resistors with a blob of solder). I'll see how long that lasts. I also ordered a replacement flex cable from china just in case.
This is a worst watch...twice it happened for me..I bought this for AED 849 ...Now they said for changing the motherboard U have to pay 900 AED ie (18000INR)...Bullshit...
They must have changed the adhesive on 2nd gen of this watch. I have a first release of this watch that had a bad battery. I had to hammer my spudger in to break the seal to gain access. I've seen multiple videos of how easy the back case comes off and it's so not!
Thank you. I know now that I can't fix this shit.
This channel is amazing. Please keep up uploading great videos like this. All best from bahrain
Thank you for your Appreciation! :)
Thank you! you're such a big help! in my case. I have to turn on watch
Thank You. I will be very glad to know that my videos help you in learning. :)
i need some instructions on how to solder the flexiboard back to the mainboard.... im new to soldering, broke the solder when changing the battery...
It is very good repair method. Thanks.
Great chanel with great guy hope you get grow more then you think .so for that you have to work more hard .keep continue with this try some thing more interesting ok
💔
Need an english version
Sure I will Upload it asap.
@@earthyfacts ah where's it at
I've had this issue. Just hold the two buttons together (have to push down on bottom button pretty hard while doing so).
yeah, its works, pressed both harder and its turned on. thx mate)
Omgosh thank you so so much!!!!
How long do you hold the buttons? When I place the watch on the charger it shows 98%, I think it should turn on? Thanks for you response.
@@floydmontgomery9100 should turn on within a couple seconds. I have to push my bottom button down pretty hard though.
I have the same problem. It doesn't work when you press the power button, but when you press two buttons hard, it works as if you press the power button, if you turn it on or off. Did you solve the problem? I disassembled and looked at the button, but the button was working without any problems. However, initialization did not solve it either.
hi sir, nice video you share, i wud like ask to how to know if flat flexible switch power the problem? and how to soldering ?
Aslamu alikum sir nice job meri watch 2 months off thi but ubi charge nahi ho rahi ur on ho rahi hai apne jo btaya data cable lgao wo kaise lagy gi please help me
Hi do you fix Smartwatches? I have 2 with same problem. where are you located?
Thanks for the good video. Can I ask a question?
1. Are you soldering one end to the leftmost terminal of the flex cable(4:10) and the other to the power button terminal(4:25)? Are there only two parts to be soldered?
2. And I am curious about what mm the thickness of the copper wire is.
Hey,can you make a video for samsung gear sport?
Thanks for good video. my watch cannot switch on. i afraid may be Wadu water in side.?
So what happened? Was there a stray wire on the button cable or did he add that to fix the problem or what?
I'm wondering that myself,I can't understand a thing he said...sounds like he has his head in a fishbowl full of water..
he soldered that wire to bypass a short, but his video was terrible and skipped the important parts
sir AOA apki repairing shop kidr ha pakistan lahore city me ha? meny apni watch thk karani ha samee issue ha
You didn't show the main part of the soldering. Important part of your vlog. can you re-edit please
Ok bro
Essentially he is jumper wiring the power button.
1. Look at ruclips.net/video/ZTor4meURO8/видео.html, solder a wire to the left most contact of the flex cable.
2. Look at ruclips.net/video/ZTor4meURO8/видео.html, solder other side of the wire to the power button. I did not desolder the button like he did, as there is enough surface area to attach it.
My watch had some water damage, it went into a rebooting loop. So after disassembly and drying it in rice for 2 days it wouldnt turn on. When put on the charger, as soon as the display went dark, it would only react to the back button (screen came back on) but not to the power button. So before ordering a new flex cable I thought I might try this solution and my watch is working again. Thank you very much Mobile Doctor!
@@earthyfactsassalamualaikum, can you show me how to soldering the cable.
@@usmansukmana1983 yea sure dear! I will upload the video on this topic ASAP. :) btw WailaikumAslaam
@@bimbo0099 your links don’t work.
For my experience I can say that it can be faulty power flex cable. I had this same issue and there was no help from opening and drying the watch. I bought a new power flex cable and problem fixed. It is over 3 years old watch.
Is it still water resistant means can use while shower etc
gracias amigo! me funciono exelente aporte saludos desde Riobamba - ecuador
Una pregunta esto se hace cuando no enciende?
Cristhian mañay como lo hiciste ? la verdad el no muestra el procedimiento sera q usted puede guiarme o hacer un video tutorial para reparar mi s3 frontier tiene el mismo problema solo enciende colocandolo en la base de carga
Hi Brother. My s3 frontier motherboard need to replace. Can u please advice where to go for reparing and fix problem apart from Samsung service center. India , Lucknow UP.
Title in english, then video in another languange 🤔
yea! but I will Upload the subtitle in English Soon... Please Stay with us. Thanks! :)
can you show me the soldering from the first start and wiring to...Thanks Assalamualaikum
No problem bro me showing the best
Plz tell me where is your shop
Bahrain
Which key did you use to open it?
sir apki shop kaha hai?
Keep it. Up
Do you provide repair services?
kya issue arha apko
Bhai can you share your number.. meri watch samsung care mai 2 month se padi hai or un gadho se kuch nai ho raha hai.. please koi contact ka mode dena..
Sir meri watch ka touch kaam nahi kar raha hai aur same day se battery bhi 10-12 ghante se jyada nahi chal rahi full charge par. Jabki pahle 2-3 din aaram se chalti thi. Iska kuch kar sakte hai kya ?
Kai baar restart karke aur reset karke bhi dekh liya kuch nahi hua.
Open watch and check touch connector
thanks
Your Welcome!
mobile doctor can you show me the main points to place the new wires for my power issue as your video skips over it.
Do you fix watches if mailed to you?? Am pretty sure I have the some problem
Yes You Can, But What is the problem? Will you please share what is the issue with your watche?
@@earthyfacts it just stopped working, won't charge turn on or anything, the dock just blinks red , I've replaced the battery just 3 months ago so I know it ain't that
@@earthyfacts where r 8 from
great job
If drained battery ..how to fix it?3.6V to 0V and black screen if charging
Meri bhi shi kr do Meri Bhi Khrb ho Gyi H ... Plz address snd me ??
Meri watch me ODIN Mode likha hua aa rha he, Watch me kuch bhi nahi ho rha. Display hamesha chalu hi rhti he
The button ribbon on the motherboard became detached how to reattach What type of adhesive to put back on ?
My red light on and off after several minute
Cant power on
What is this issue
Bhai mere Ghadi ka charger gun Gaya Kaise Mein charge karo
Same aisa problem hua hai kha bana ke milega
Bhai please bataiye Mein Kaise charge Karva Samsung gar port hai
Meri samrtwatch ka button karab hai use thuk kaise karenge A1
This video seems to have the wrong title is there another one that shows you how to repair the button.
There is a much better way to repair the power button. Just order a new flexible through Ebay from China and solder it in. Was not really difficult with the right tools.
What do you mean by a new flexible?
Just don't let it run out of juice .
AOA. Hows you??
Mairi watch samsung gear s3 frontier
On nh ho rahi hai
sale krni hai apko 03219000490
Aleykum Selam
Yrr bahi mery pas b s3 frontier ha..... aik baar giri ha sirf back glass pr crack aaya aur tb sy chal ni rai.... mein ny data cable waly poles pr b power dy kr try kia ha lakin on ni ho rai........ mujy btain k koi chance ha sai hony ka..... ap mujy apna whatsapp num. Be dy sakty hen...... help krin yr bahi thori
Looks like he jumped the positive side of the cable to the positive side of the power switch. My galaxy watch smr805 is bricked in reboot loop. Im trying this.
Hi
I have the same problem with the reboot loop.
Did this worked for you?
En mi caso sale que esta cargado al 100% pero no enciende
Just remove the 4 pcs o-ohm resistors located on the switches flex ,and wire jumper them instead. you must use a microscope, this are tiny...
If not remove?
@@mohdfazal6994 you can let them stay, but it is easier to jumper the points with the resistor off, it doesn't help there.
Thank you! I just did this. I tried the wire method like the video but that did not work. So I removed the resistors and then bridged the connections with solder. (Replaced resistors with a blob of solder). I'll see how long that lasts. I also ordered a replacement flex cable from china just in case.
This is a worst watch...twice it happened for me..I bought this for AED 849 ...Now they said for changing the motherboard U have to pay 900 AED ie (18000INR)...Bullshit...
They must have changed the adhesive on 2nd gen of this watch. I have a first release of this watch that had a bad battery. I had to hammer my spudger in to break the seal to gain access. I've seen multiple videos of how easy the back case comes off and it's so not!
Mine has power button problem?
Bladi eye don anderstan ju bladi
Bahi plese help me 🙏🏼🙏🏼 same problem sir plese help me 🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼replay plese ya contact number do apna