I was almost ready to drag all the parts off into the trash but your video showed me how to get everything back together. My watch is working great again and I only had 1 screw left!! Thanks
Hi ZE, just got my replacement kit from Amazon today. It took 3 weeks to arrive. During the 3 weeks wait, I watched your video over and over several times. I successfully changed out the battery and it is currently charging at 98%. I will be monitoring the battery performance over the next few days. Thanks a lot for a very well put together video on this battery replacement. P.S. I almost stripped one of the screws on the back cover but immediately stopped and reassessed the removal. I did encounter an already stripped Phillips Head screw on the inside. Made me wonder about QA and QC during assembly. Thanks again. Take care and stay safe !
Thank you very much...after your seeing your video, i followed every step and it worked out perfect...my old battery was warped and so far its working great...thanks again
Thank you for providing a simple illustration of how to remove and replace the battery. Amazing video! Watching this video made it simple to replace my battery and now its like new
thank you so much , i did as your video and it really work just fine and noiw my battert last much much longer . thank you so much for step by step process .
Thanks for your kind comment. Yes, you are right. Using a hot air gun helps a lot, and I use it usually, but not everyone has a hot air gun so I liked to use the tools that is available to everyone.
Finally a video that explains well each step. Thanks, tomorrow i'll try to replace my battery. You are a little to slow but its ok, you had to do it slowly and carefully, cause its easy to break something in the process. Well done
Great video thankyou... Replaced battery, charged to 100 Percent no worries. Just have one problem it wont turn on now. have tried hard reset but nothing. Can you think of something I have done wrong ?? cheers Jason
I was looking for how to replace the app function on the watch face from steps to battery % and found your video! Nice helpful video, but not what I wanted! Hope I never need to replace the battery. The watch would no longer be IP68 after battery replacement unless the seal material was replace also!
Good video. But what about waterproofing after battery replacement? I notice there is some kind of rubber sealant around the edge. Will it still retain waterproof after opening the case?
It will remain water resistance if you pay attention carefully when opening the back cover. Be careful not to damaging the seal. Otherwise, you will have to buy a new back cover to maintain water resistance
Excelent tutorial, can i make you a question? Please tell me the symptoms to change the battery, my smartwatch restarts and the activation gesture stopped working
One of the most important symptoms of battery damage is the loss of charging too quickly or not keeping the charge. As for restarting, there are possibilities, either a software problem, or hardware, such as the watch being hit by a strong blow or water leaking inside it.
Great video!! I have one and love it. Couple of questions, where you got the original battery replacement and can you share a link where I can get all this tooling required to make this replacement? Also, the bezel of my Frontier has a failure, there are like 7 clicks that is like no moving the screen, you have a video of that? Very appreciated!! Greetings from Monterrey México.
Thanks for your comment First,, check this link for the battery. www.ebay.com/itm/For-Samsung-Gear-S3-Frontier-Classic-SM-R760-R770-Genuine-Battery-EB-BR760ABE/303171738649?hash=item4696719c19%3Ag%3ACgMAAOSwvv1c76fu Second, for the bezel, I currently don't have the watch with this issue. If I receive a watch with this issue later on from a costumer, I will make a video tutorial on how to fix it.
Sounds like poor connection of ribbon cable with those Pixel problems. Always need firm screwdriver in screw before removal/insertion! Less chance of stripping! Starting screws manually to get the feel that they are seated right before auto screwing and tightening.
Unlike the video, I replaced my back cover with a new one, which has the waterproof seal pre-installed. I did so, because the glass on the back had cracked & I figured I should kill two birds with one stone. I recommend replacing the back when replacing the battery to retain the water resistance of the device.
Thanks for the comment and the recommendation, it has not happened to me that the back cover breaks with me or the water resistance seal, so I did not recommend that in the video, but if that happens then I must replace it to keep the water resistance. Thanks again
Highly recommend not using a knife or sharp object to open the case. There is a lip on top and bottom that will help with getting the back off without damaging the seal from the sides (it's close to the edge.) Take your time and be gentle. It worked for me and my seal is intact.
What you say is correct in most cases, but some watches are subjected to difficult conditions so that it becomes almost impossible to slot without using a sharp instrument and this watch that I photographed tried to use a plastic opening machine before using the blade, but it was useless and if I watched the video, I only tried to move the cover after that I used Plastic tool.thank you for comment.
You might do a "fast edit" tik-tok style in 2 min flat, cut out all the downtime & just clips of the action - still add titles - think 4 second clips with titles- perhaps 30-40 clips // just an idea I am mulling around for some of my own RUclips video creation :) Cheers
Sometimes you have to use the razor, especially if the back cover is stuck. Don't worry, this is not the first time Thanks for your comment, I hope you learned something.
check this link for the battery. www.ebay.com/itm/For-Samsung-Gear-S3-Frontier-Classic-SM-R760-R770-Genuine-Battery-EB-BR760ABE/303171738649?hash=item4696719c19%3Ag%3ACgMAAOSwvv1c76fu
I replaced the battery on my watch and I am experiencing the same problem. It will charge and as soon as I take it off the charger it's at 97 percent and in about a few hours it's at 70 percent. It still barely last a work shift?
It will remain water resistance if you pay attention carefully when opening the back cover. Be careful not to damaging the seal. Otherwise, you will have to buy a new back cover to maintain water resistance
It depends on the country you live in, but you can simply search on the Internet to the nearest place to you, and if you can access sites such as ebay, Amazon, Alibaba, the price is appropriate.thanks
fyi for people trying this @825 the ribbon the is trying to pop up don't pop up there is actual plastic that is holding it down, if you flip the watch over there is a screw that needs to be removed to loosen the plastic and when you go and loosen that there still its still not loose enough to slide the ribbon out. So you cant pop it up or slide it out, next time please show people the entire watch exactly what you are doing because i found multiple places in your video that you did not show the watch and things that are being blocked
I apologize if the video did not help you repair your watch In this video I showed you everything you need to replace the battery safely and quickly and I did not hide anything. I have replaced several batteries for Samsung watches and have not used any different technique and have been 100% successful Thanks for your comment.
I agree with you, but sometimes you don't have many options I have two options (razor or hot air gun) but not everybody have the hot air gun, I liked the tools being accessible to everyone. Accept my regards and thanks for your comment
1- If you buy an original battery, the battery life will be 90% of the battery life in the new watch 2- It will remain waterproof if you pay careful attention when opening the back cover. Be careful not to damage the seal. Otherwise, you will have to buy a new back cover to maintain the water resistance.
@@ZeeEverything So can u tell how many days can it work? Of how long gps can be tracking? Is that worth to replecment? New batery Coast Around 25-30€ and honor gs pro with briliant battery life Coast about 120-145€.
I suggest you replace the battery with an original one and then do a factory reset for the watch and the battery will last you at least 20 hours with use.
First, make sure that the wireless charger is working properly. Second, put the watch on charge for 24 hours, as the new battery may be completely empty. If the watch does not work after that, reopen the watch and make sure that you have installed the battery correctly. If all of that doesn't work, that means you have a clock board problem
Si vous n'endommagez pas le joint, cela devrait aller. mais si vous l'avez endommagé, vous devez remplacer le couvercle arrière pour conserver la résistance à l'eau. remarque: j'ai utilisé google translate
I hope you didn't cut the power switch cable. I recommend that you rewatch the video at the time of 8:15 because I have stated that there is a cable for switches, you cannot disconnect. Reopen your watch again and make sure that there is no issue with this cable.
If you do not take care when you are working or if you are in a hurry or you do not have the slightest kind of experience then surely you will destroy the back of the watch just follow the instructions and I am confident you will accomplish the work perfectly. Thanks for your comment
dont waster our time take your watch to go get fixed by a professional this video has a lot of missing thing that they dont tell u like a screw under everything take out the final ribbon at 759 and the the ribbons are so damn touchy by doing that he just did in the video it doesnt come out easy or at all and snapped doing what he just did
If you are not able to repair it yourself, even though I see the matter is not very difficult, then search in your area for a shop that specializes in repairing electronic devices. As for sending it by mail, I do not see it as a good idea. But if your place of residence is close to me, I will be happy to serve you
I just successfully completed the battery replacement today. Thank you for your valuable info.
Glad it helped
thank you for your comment.
Just replaced the battery on my watch and followed your instructions, I must say what a brilliant tutorial. Thank you so much.
You welcome.
Brilliant vid. Just replaced mine with a battery and tool kit from Amazon. This vid was really easy to follow along. Most appreciated.
Glad it helped you,thanks for comment.
I was almost ready to drag all the parts off into the trash but your video showed me how to get everything back together. My watch is working great again and I only had 1 screw left!! Thanks
Happy to hear that .
Hi ZE, just got my replacement kit from Amazon today. It took 3 weeks to arrive. During the 3 weeks wait, I watched your video over and over several times. I successfully changed out the battery and it is currently charging at 98%. I will be monitoring the battery performance over the next few days. Thanks a lot for a very well put together video on this battery replacement. P.S. I almost stripped one of the screws on the back cover but immediately stopped and reassessed the removal. I did encounter an already stripped Phillips Head screw on the inside. Made me wonder about QA and QC during assembly. Thanks again. Take care and stay safe !
Glad the video helped you, thanks for your kind comment.
Thank you very much...after your seeing your video, i followed every step and it worked out perfect...my old battery was warped and so far its working great...thanks again
Thanks for your comment, I'm glad the video helped you.
Thank you so much for this clear instruction. Just changed the battery watching your step-by-step guide.
You're welcome!
Thanks for your comment.
big thanks for your very detailed steps, it's the best video for this topic till now, really appreciate it actually.
Happy to help
Thanks for your comment.
Just replaced mine following your video. Thanks for the very clear demonstration!
Glad it helped!
Thanks for your kind comment.
An SD TYPE card slot to change the battery would be outstanding! Just use an extraction pin to pop out the old like an SD or SIM card!
Thank you for providing a simple illustration of how to remove and replace the battery. Amazing video! Watching this video made it simple to replace my battery and now its like new
Glad it helped you, thank you for comment.
hi , where have you bought your battery?
@@WildBeretEbay
@@slyronnettecorley6016 iti s hard to find good battery , aliexpress got lots of them :(
www.ebay.com/itm/For-Samsung-Gear-S3-Frontier-Classic-SM-R760-R770-Genuine-Battery-EB-BR760ABE/303171738649?hash=item4696719c19:g:CgMAAOSwvv1c76fu
Thank you so much! Finally an easy to follow guide. Keep the great work!! Greetings From México 🇲🇽!!
You welcome, glad it helped.
Wow and you actually speak American!
thank you so much , i did as your video and it really work just fine and noiw my battert last much much longer . thank you so much for step by step process .
You welcome.
Omg...thank you..thank you...thank you!! This video helped me very much. I appreciate the time you took to do it.
You are so welcome!
Thank you for the clear instructions. You have saved me so much money!
You're welcome
Thanks for your comment.
Thank you very much for the tutorial. Your slow pace made it easy to follow. you saved me a ton of money and I got to learn something new.
Glad to help you, thanks for your kind comment.
Great video and well broken down into easy steps! Watch works great again!!
I hope you have benefited from the video, thank you
Thank you Sir. I just replaced my battery and my watch works great now.
You're welcome!
thank you for your comment.
3:10 I used a heat gun to make it easier on me as i hate scratching the watch awesome work boss
Thanks for your kind comment.
Yes, you are right. Using a hot air gun helps a lot, and I use it usually, but not everyone has a hot air gun so I liked to use the tools that is available to everyone.
Finally a video that explains well each step. Thanks, tomorrow i'll try to replace my battery. You are a little to slow but its ok, you had to do it slowly and carefully, cause its easy to break something in the process. Well done
Yes, it's helpful Video.
Thank you, I'm happy that it helped.
Slow and steady and accurate gets the job done right!
Looks good. I would not have been brave enough to do it without the watch being powered down before taking the back off.
Thank god for this video. Once I'd taken it apart to replace the battery I realized I had no idea how to put it back together!
Glad the video helped you
No god we trust!
THANK YOU ☺️ SAVED ME A LOT $$$ VERY DETAILED VIDEO 👍🏾
You welcome, Happy to hear that.
Thank you soooo much! This step by step helped immensely! Very easy to follow.
Glad it helped!
Thank you for your comment.
Thank you! Very easy instructions to follow. Just replaced my battery - old battery was warped on one side. Fingers crossed it all works well.
You welcome
Thanks for your comment.
Great video thankyou... Replaced battery, charged to 100 Percent no worries. Just have one problem it wont turn on now. have tried hard reset but nothing. Can you think of something I have done wrong ?? cheers Jason
I apologize for the delay in responding to your question, disassemble the watch again and make sure that you did not break the keyes cable.
Great video, thank you.
You welcome.
Thank you so much. Just perfect
I was looking for how to replace the app function on the watch face from steps to battery % and found your video! Nice helpful video, but not what I wanted! Hope I never need to replace the battery. The watch would no longer be IP68 after battery replacement unless the seal material was replace also!
Sorry for the late reply, if you damaged the seal when opening the back cover, you must replace it.
Thanks for your comment.
Thanks for the video. Was able to replace mine with your help.
Glad it helped
But I understand you lost the watch Ip68 right?
If you didn't damaging the seal it should be ok. but if you damaged it you should replace the back cover to keep the water resistance.
ZeeEverything thank you this was a pro job. I am now your Subscriber. Thank you
I'm glad that my video helped you and thank you for subscribing!
Good video. But what about waterproofing after battery replacement? I notice there is some kind of rubber sealant around the edge. Will it still retain waterproof after opening the case?
It will remain water resistance if you pay attention carefully when opening the back cover.
Be careful not to damaging the seal.
Otherwise, you will have to buy a new back cover to maintain water resistance
Excelent tutorial, can i make you a question? Please tell me the symptoms to change the battery, my smartwatch restarts and the activation gesture stopped working
One of the most important symptoms of battery damage is the loss of charging too quickly or not keeping the charge. As for restarting, there are possibilities, either a software problem, or hardware, such as the watch being hit by a strong blow or water leaking inside it.
Great video. Will try to replace my batt soon. Do you know if water resistance is still ok after this?
Yes, it will remain water resistance if you pay attention carefully when opening the back cover.
Be careful not to damaging the seal
Not actually to IP68 unless water seal is added before back is put on!
Great video!! I have one and love it. Couple of questions, where you got the original battery replacement and can you share a link where I can get all this tooling required to make this replacement?
Also, the bezel of my Frontier has a failure, there are like 7 clicks that is like no moving the screen, you have a video of that? Very appreciated!! Greetings from Monterrey México.
Thanks for your comment
First,, check this link for the battery.
www.ebay.com/itm/For-Samsung-Gear-S3-Frontier-Classic-SM-R760-R770-Genuine-Battery-EB-BR760ABE/303171738649?hash=item4696719c19%3Ag%3ACgMAAOSwvv1c76fu
Second, for the bezel, I currently don't have the watch with this issue. If I receive a watch with this issue later on from a costumer, I will make a video tutorial on how to fix it.
Great Help Thanks
Glad it helped
Thanks for that, worked a treat! A scary experience though :-)
Glad to hear it!
thanks for your comment.
Successfully changed battery only top of screen have dead pixels now, but its working.
Thank for your comment.
Sounds like poor connection of ribbon cable with those Pixel problems. Always need firm screwdriver in screw before removal/insertion! Less chance of stripping! Starting screws manually to get the feel that they are seated right before auto screwing and tightening.
very nice video & great song choice.
Thanks.
I turned the sound off! Too loud!
Great video!! where did you buy the batteries?
Thank you for your comment, you can find the battery on eBay or Amazon and it's very cheap.
Do you know if the insides of the Classic are the same? I need to change the battery on mine. Thank you!
Yes, the same.
Unlike the video, I replaced my back cover with a new one, which has the waterproof seal pre-installed. I did so, because the glass on the back had cracked & I figured I should kill two birds with one stone. I recommend replacing the back when replacing the battery to retain the water resistance of the device.
Thanks for the comment and the recommendation, it has not happened to me that the back cover breaks with me or the water resistance seal, so I did not recommend that in the video, but if that happens then I must replace it to keep the water resistance. Thanks again
Thanks!!
You welcome.
Highly recommend not using a knife or sharp object to open the case. There is a lip on top and bottom that will help with getting the back off without damaging the seal from the sides (it's close to the edge.) Take your time and be gentle. It worked for me and my seal is intact.
What you say is correct in most cases, but some watches are subjected to difficult conditions so that it becomes almost impossible to slot without using a sharp instrument and this watch that I photographed tried to use a plastic opening machine before using the blade, but it was useless and if I watched the video, I only tried to move the cover after that I used Plastic tool.thank you for comment.
Can you tell where to buy the special Y type screw driver for samsung watch
You can find it on ebay or Amazon or any tools store near you, but make sure get size 0 or 1.
You might do a "fast edit" tik-tok style in 2 min flat, cut out all the downtime & just clips of the action - still add titles - think 4 second clips with titles- perhaps 30-40 clips // just an idea I am mulling around for some of my own RUclips video creation :) Cheers
Thank you for your comment
I thinking about that, but my problem with the time I have a lot of videos waiting for editing.
good job for putting new battery I couldnt that, I wished they had sdcard slot on the watch
Congratulations to all the people who wrecked their watch attempting this 😅
hi, can share where u get the screwdriver for the watch cover? What is the spec? thanks
you can find Y1 screwdriver in many place for me i use this one (ruclips.net/video/08G_OytZMis/видео.html)
@@ZeeEverything thanks a lot.
Hi, a couple of the rear screws are stripped. Is there any solution to fix and unscrew it?
Cringed when the razor went near the watch. Hope its yours and not a customers. Other than that well detailed and helpful video
Sometimes you have to use the razor, especially if the back cover is stuck. Don't worry, this is not the first time
Thanks for your comment, I hope you learned something.
Please share the link of battery to purchase
check this link for the battery.
www.ebay.com/itm/For-Samsung-Gear-S3-Frontier-Classic-SM-R760-R770-Genuine-Battery-EB-BR760ABE/303171738649?hash=item4696719c19%3Ag%3ACgMAAOSwvv1c76fu
What kind of screw driver was that you used in the begining of the video that was automatic?
It's Xiaomi wowstick 1F+, i also made a video on it, you can watch it here is the link : ruclips.net/video/08G_OytZMis/видео.html
I replaced the battery on my watch and I am experiencing the same problem. It will charge and as soon as I take it off the charger it's at 97 percent and in about a few hours it's at 70 percent. It still barely last a work shift?
Where would I get that screwdriver?
You can buy it from Amazon or eBay
Watch this video can help you ruclips.net/video/08G_OytZMis/видео.html
What watch face do you use?
The watch face name is breathe.
all good video but dont have to take the whole inside out, just remove the 2 screws and battery and replace then reverse the process.
Will it still be waterproof after? 😅
Yes
What watch face are you using?
The watch face name is ( Breathe ).
If you open the watch do you lose the water proof seal?
It will remain water resistance if you pay attention carefully when opening the back cover.
Be careful not to damaging the seal.
Otherwise, you will have to buy a new back cover to maintain water resistance
@@ZeeEverything thank you for the reply!
Where to buy this battery?
It depends on the country you live in, but you can simply search on the Internet to the nearest place to you, and if you can access sites such as ebay, Amazon, Alibaba, the price is appropriate.thanks
fyi for people trying this @825 the ribbon the is trying to pop up don't pop up there is actual plastic that is holding it down, if you flip the watch over there is a screw that needs to be removed to loosen the plastic and when you go and loosen that there still its still not loose enough to slide the ribbon out. So you cant pop it up or slide it out, next time please show people the entire watch exactly what you are doing because i found multiple places in your video that you did not show the watch and things that are being blocked
I apologize if the video did not help you repair your watch
In this video I showed you everything you need to replace the battery safely and quickly and I did not hide anything.
I have replaced several batteries for Samsung watches and have not used any different technique and have been 100% successful
Thanks for your comment.
Using a razor blade to pry is just about the most unsafe and irresponsible thing I've ever seen anyone do with any type of repair job
I agree with you, but sometimes you don't have many options I have two options (razor or hot air gun) but not everybody have the hot air gun, I liked the tools being accessible to everyone.
Accept my regards and thanks for your comment
can you include the links to your tools? thank you
Which of the tools need its link?
What type of screwdriver is that I must own one.
You need Tri-point Y1 and Phillips 0 screwdriver
Can somebody confirm how change battery life before and after replacement? It is still Waterproof
1- If you buy an original battery, the battery life will be 90% of the battery life in the new watch
2- It will remain waterproof if you pay careful attention when opening the back cover. Be careful not to damage the seal.
Otherwise, you will have to buy a new back cover to maintain the water resistance.
@@ZeeEverything So can u tell how many days can it work? Of how long gps can be tracking? Is that worth to replecment? New batery Coast Around 25-30€ and honor gs pro with briliant battery life Coast about 120-145€.
I m tryed yet my watch gt while ran. From 100 to 28 % in les than 40 min..without music and aod
I suggest you replace the battery with an original one and then do a factory reset for the watch and the battery will last you at least 20 hours with use.
I already change new battery..but still dead..whats problem sir
First, make sure that the wireless charger is working properly. Second, put the watch on charge for 24 hours, as the new battery may be completely empty. If the watch does not work after that, reopen the watch and make sure that you have installed the battery correctly. If all of that doesn't work, that means you have a clock board problem
y'a plus de joint la montre n'est plus étanche !!!
Si vous n'endommagez pas le joint, cela devrait aller. mais si vous l'avez endommagé, vous devez remplacer le couvercle arrière pour conserver la résistance à l'eau.
remarque: j'ai utilisé google translate
a Y1 bit is not working
Replaced the battery now watch won't turn back on but says it's charged 100%
I hope you didn't cut the power switch cable. I recommend that you rewatch the video at the time of 8:15 because I have stated that there is a cable for switches, you cannot disconnect. Reopen your watch again and make sure that there is no issue with this cable.
Battery buying link
Great way to ruin the back of the watch
If you do not take care when you are working or if you are in a hurry or you do not have the slightest kind of experience then surely you will destroy the back of the watch just follow the instructions and I am confident you will accomplish the work perfectly. Thanks for your comment
dont waster our time take your watch to go get fixed by a professional this video has a lot of missing thing that they dont tell u like a screw under everything
take out the final ribbon at 759 and the the ribbons are so damn touchy by doing that he just did in the video it doesnt come out easy or at all and snapped doing what he just did
This video is okay but I'm telling you way too much of the time or we get to see is your hands I think you should redo it.
Can i ship to you and u fix it for me , i ll pay
If you are not able to repair it yourself, even though I see the matter is not very difficult, then search in your area for a shop that specializes in repairing electronic devices. As for sending it by mail, I do not see it as a good idea. But if your place of residence is close to me, I will be happy to serve you
110pp
Bad instructional
Thnx for the help!
You welcome.