Gas Training - No Hot Water - Viva Training Academy - Roy Fugler
HTML-код
- Опубликовано: 29 сен 2024
- No Hot Water. Boiler Breakdown. How to test for no hot water.
Viva Training Academy
Gas Breakdown Training Video with Roy Fugler from Viva Training Academy
That cartridge can be a right b to get out even with a socket
When inserting a new one use grease.
💝💝💝
sorry i flooded your workshop Roy.
Did you really flood it
@@AllenHart999 yes, i just did the fault finding course and it was absolutely brilliant, however when fault finding on the fancy glass fronted 8000 instead of removing the wiring for the thermister i actually removed the whole assembly. Not realising it was in a wet pocket Hot water under 1.5 bar of pressure shot out and soaked me, the tools, worktops - everything !!!
No need to apologise Warren, it wasn't really a flood, better doing it in the workshop rather than Mrs Miggins kitchen 😉
Allen i have to say mate by you putting these videos up been very helpful mate keep up the good work and have a blessed day
If the boiler is a few years old those cartridges will be seized in , the best way I have found to release them is I modified a box spanner and welded a 1/2 inch socket to it and I use a 600 mm breaker bar to crack the seal , you may also find using a wobble adapter on the end of the bar will get the job done depending which boiler it is , put plenty of silicone grease on the new one and it will go back in easy....👍
@@markchristohperowen6806 what?
I was about to change an ariston microgenus 24 yesterday because the hall effect sensor was fauty. Wish I had seen this video a while ago as it would have saved me a lot of headache.
So you never changed the boiler?
@@johnburns4017 Nope, went there yesterday to size up for a replacement and whilst doing so found the fault. Made a video on my channel of how I temporarily fixed it.
Great video 👍 try getting that cartridge out after boiler been in for use for years 😂
Great video Roy and Allen
Thanks Roy /Allen
Thanks Roy and Allen
Great
Great video guys 😎👍
Brilliant
Smashing work guys, always enjoy the great content 👍.
great video but i wish you would have continued, i have a similar problem with same boiler, when i call for demand the sensor lights up but it doesn't fire the boiler up meaning there's another problem somewhere else
Hello, you are giving very good technical information. I wish you would add the explanation feature with Turkish subtitles, I don't know English. I write this translation to Google as an English translation and send it to you. We would be very happy if you add Turkish subtitles to your videos.
Thank you Allen & Roy
👍👍👍👍👍👍👍👍👍👍👍💫
Hi sir I have baxi zetatec and 2 month old I got hot water but my radiator are not getting hot. The seams to fire and pump is running but no heat. I have tried to put the heating temperature up and nothing really happening the heating pipe seems to get little worm and that's it please can you help. Kind regards from afzal of south Wales uk.
Pump or blockage.
Hi Alan and Roy,another great video👍
Where can i purchase the socket that fits the turbine from??
Have a good weekend guys😉
Hi Shannon.
I got it and one that fits the diverter valve cartridge from Tolsons in Sheffield, they have an ebay store.