The ND32 is a gorgeous sky and shadow! Again, so nice to hear your voice, it's calming. Do you have a setting for the runcam thumb pro please, I prefer 2.7k 60fps, I've always used auto. Thanks man
Thanks a lot my friend 🙏I only had the runcam for a very short time. But normally with ND filters on bright days you you try to use iso100 and set shutter to 1/120 (double the fps) and the white balance set to what brightness it is. Some also set sharpness to low and add it afterwards in post. Now you just need to pick the right ND for the brightness of the situation. Hope this helps. Take care
@@McLogo76 certainley does, thanks man, i want you to see a piece of footage with your settings, it looks amazing , thankyou! Keep going, and dont push yourself too much, but i know your very capable.🙏
I used to fly the Roma F35 that has mamba 2203.5 4200kv and I'm hooked on that size for any 3.5 inch but they come with m3 holes so i just drill out the holes if there m2 holes
@@McLogo76 yes they have amazing power. Try them out just make sure the frame has a hole in the middle of the mounting screws cause the motor screws on the bottom have to fit into the center hole of the motor screws. 4200kv on 4s is great I've also tried the 2550kv on 6s and they are punchy AF
@@agespin I‘m sorry but I wouldn‘t have got the time to build / sell fpv quads. I would recommend to get a bnf quad from a local (from your country) online shop if you want to get into the hobby. And then learn to build and fix it as that is necessary with fpv quads.
I'm ready to build my second!! I love the way this thing flies.
@@willbrown8928 I can 110% relate to that 🤣 - have fun mate!
🔥🔥🔥🔥🔥🔥🔥
Sick flying! Dropped a sub!
@@RockyMountainFPV Thanks a lot! Also subbed - wonderful scenic clips 👌
welcome to the Pacer 1604 club! I love how lightweight they are as well! how heavy is the lil matey frame?
@@GarethDix 👊😂 I‘ve not weighed it but it‘s not too light rather built strong with 4mm arms and aluminium cam cage
Nice flyin', nice vid, new sub!👍
@@hi_desert_rat Thanks a lot! 🤙🏾🙏🏽
Nice flight buddy I can say they all fly differently in my opinion
@@sosdeathvalleyThanks mate 🙏 I think for some other frames I would almost need to adjust my rates to feel comfortable.
@@McLogo76 yuuup
Those quads look fire 🔥 💯🤌
@@burdfamfpv Thanks mate! 🙏🏽 love em
I love 3.5”. The Ummagawd 1605’s are 🔥
@@WindChillFPV I bet they also really work good… 👍 still got 3 of them but never managed to get the 4th motor
The ND32 is a gorgeous sky and shadow! Again, so nice to hear your voice, it's calming.
Do you have a setting for the runcam thumb pro please, I prefer 2.7k 60fps, I've always used auto. Thanks man
Thanks a lot my friend 🙏I only had the runcam for a very short time. But normally with ND filters on bright days you you try to use iso100 and set shutter to 1/120 (double the fps) and the white balance set to what brightness it is. Some also set sharpness to low and add it afterwards in post.
Now you just need to pick the right ND for the brightness of the situation. Hope this helps. Take care
@@McLogo76 certainley does, thanks man, i want you to see a piece of footage with your settings, it looks amazing , thankyou!
Keep going, and dont push yourself too much, but i know your very capable.🙏
Looks good
Thanks mate
Great, RIP, bro.
Thanks a lot bro ;)
Finally.. a lil matey v2! Do you have a link to share the STL files?
Yes, I'll upload them to printables and will also share them in the Piratframes group on FB 😉
www.printables.com/model/960213-piratframes-lil-matey2-moonlight-4k-parts and here are the other lil matey 2 parts: www.thingiverse.com/thing:6576159
Ikea Matty :-)
It had to be done 🤣😂
I used to fly the Roma F35 that has mamba 2203.5 4200kv and I'm hooked on that size for any 3.5 inch but they come with m3 holes so i just drill out the holes if there m2 holes
@@LehtusBphree2flyFPV Interesting, how do they feel on a 3.5“? Are they more torque? 4200kv on 4S?
@@McLogo76 yes they have amazing power. Try them out just make sure the frame has a hole in the middle of the mounting screws cause the motor screws on the bottom have to fit into the center hole of the motor screws. 4200kv on 4s is great I've also tried the 2550kv on 6s and they are punchy AF
Hi how much it will cost me for you to build
one for me, I have a futaba 14
@@agespin I‘m sorry but I wouldn‘t have got the time to build / sell fpv quads. I would recommend to get a bnf quad from a local (from your country) online shop if you want to get into the hobby. And then learn to build and fix it as that is necessary with fpv quads.