Unfortunately, if PPF starts lifting overtime, the best thing to do is to cut it to keep it from continuing to lift. After you do that, clean the area with alcohol/water mix and press the edge down with a clean microfiber. Use heat to seal the edge if needed. Also, If you're under warranty from the shop that did your PPF, they should be able to fix it or replace the panel.
What do you do if it rains daily? Do you rinse and dry it daily as well to avoid watermarks? Example: while going to work - its raining. While in work, it stops raining and sun comes up. You get back home, do you wash right away? Tnx
When you get home and it's no longer raining, use a clean, soft microfiber cloth to wipe down the car. This helps prevent water spots from forming. You don't necessarily have to wash it again, just wipe it down. You can also use a quick detailer spray like a waterless wash to lift any dirt or debris and prevent water spots at the same time. This also provides a bit more lubrication to prevent scratches while you're wiping it down too. We use our waterless wash for this method - tesbros.com/products/waterless-wax-16oz
Will spraying tack solution on top of ppf damage the ppf? Not sure because it has alcohol in it and I don’t know what to use to clean it before installing MOHS EVO 2 ceramic coating.
Hi thanks for the video. I put PPF on my new Mazda 3 hatchback T Premium’s hood. I purchased mitts and wonder how you clean them after use. I just rinsed them over and over for a while and they take a while to dry. What to you do? Also, did you say you added ceramic coating on top off the PPF? I was thinking about doing the ceramic to the rest of the car with out the PPF
Great question! I spray them down with my hose once I'm done cleaning, wring them out, and then hang them or drape them over something to dry. And yes you can add ceramic coating to your PPF and the paint. No worries there. Just remember that you can't put PPF or vinyl on top of the coating since it won't adhere to it. So be sure that's what you want. If you want to do it yourself, I recommend the ceramic coating MOHS EVO for beginners. It's just easier to work with imo. It can go over PPF, vinyl, and paint. Here's our video on it: ruclips.net/video/krXTc5Eso7w/видео.html
If you're looking to just make it easier to clean and keep clean, then ceramic coating is a good choice. Keep it mind that it won't protect against rocks or scratches like PPF will though. You can always ceramic coat on top of the PPF for that extra hydrophobic layer if you'd like.
Hi I have a black Honda civic sport with ppf and ceramic coating. I would like to take my car to wash it by hand but I’m afraid that if I use wash mitts it will give swirl marks, will using wash mitts leave swirl marks? Any suggestions or advice?
Hand washing is the ultimate method for cleaning your car. To prevent swirl marks, use the two-bucket method ( ruclips.net/video/1PZxu9VwlMo/видео.html ). This technique involves one bucket for soapy water and another for rinsing, allowing you to thoroughly clean your mitt between panels and avoid introducing debris to the surface. Ensure your mitt remains clean and use straight, gentle motions rather than circular ones.
Touchless car washes won't leave swirl marks, so that's a plus. But oftentimes, they use very harsh chemicals that can shorten the life of your ppf and ceramic coating overtime if you use them often. If you can't do a full wash at home, you can do those every now and then and use a rinseless wash like ONR or our waterless wash in between washes. ONR: www.amazon.com/Optimum-NR2010Q-Rinse-Wash-Shine/dp/B00D8DR0AO/ref=sr_1_1_sspa Tesbros: tesbros.com/products/waterless-wax-16oz?variant=40706980151455
@@tesbros thank you. What if I don’t do the drive through touchless wash and take it into a bay wash? What would be the steps then to avoid scratches or swirls?
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Thanks for the great tips!
You bet!
Can the Tesla with PPF go through a car wash or is that an absolute no-no?
It can if edges are wrapped over but still not recommended
Awesome video! Can you do a follow-up of what to do when or if ppf starts lifting in places on edges over time?
Unfortunately, if PPF starts lifting overtime, the best thing to do is to cut it to keep it from continuing to lift. After you do that, clean the area with alcohol/water mix and press the edge down with a clean microfiber. Use heat to seal the edge if needed.
Also, If you're under warranty from the shop that did your PPF, they should be able to fix it or replace the panel.
What do you do if it rains daily? Do you rinse and dry it daily as well to avoid watermarks?
Example: while going to work - its raining. While in work, it stops raining and sun comes up. You get back home, do you wash right away? Tnx
When you get home and it's no longer raining, use a clean, soft microfiber cloth to wipe down the car. This helps prevent water spots from forming. You don't necessarily have to wash it again, just wipe it down.
You can also use a quick detailer spray like a waterless wash to lift any dirt or debris and prevent water spots at the same time. This also provides a bit more lubrication to prevent scratches while you're wiping it down too. We use our waterless wash for this method - tesbros.com/products/waterless-wax-16oz
I live in an apartment and can’t do the wash there. Is it ok to just do a rinseless wash like ONR?
Yes! Using a rinseless wash like ONR can keep your car clean and well-maintained even when traditional washing methods aren't an option.
Will spraying tack solution on top of ppf damage the ppf? Not sure because it has alcohol in it and I don’t know what to use to clean it before installing MOHS EVO 2 ceramic coating.
Tack will be just fine
Hi thanks for the video. I put PPF on my new Mazda 3 hatchback T Premium’s hood. I purchased mitts and wonder how you clean them after use. I just rinsed them over and over for a while and they take a while to dry. What to you do? Also, did you say you added ceramic coating on top off the PPF? I was thinking about doing the ceramic to the rest of the car with out the PPF
Great question! I spray them down with my hose once I'm done cleaning, wring them out, and then hang them or drape them over something to dry. And yes you can add ceramic coating to your PPF and the paint. No worries there. Just remember that you can't put PPF or vinyl on top of the coating since it won't adhere to it. So be sure that's what you want. If you want to do it yourself, I recommend the ceramic coating MOHS EVO for beginners. It's just easier to work with imo. It can go over PPF, vinyl, and paint. Here's our video on it: ruclips.net/video/krXTc5Eso7w/видео.html
@@tesbros thank you for your reply!
@@troigrl anytime! Here to help.
So is ceramic coding better ?
If you're looking to just make it easier to clean and keep clean, then ceramic coating is a good choice. Keep it mind that it won't protect against rocks or scratches like PPF will though. You can always ceramic coat on top of the PPF for that extra hydrophobic layer if you'd like.
Can I apply Adams Advance Graphene over a Wax Based Ceramic?
It won't adhere very well to the wax. The graphene should be applied directly to the paint
Hi I have a black Honda civic sport with ppf and ceramic coating. I would like to take my car to wash it by hand but I’m afraid that if I use wash mitts it will give swirl marks, will using wash mitts leave swirl marks? Any suggestions or advice?
Hand washing is the ultimate method for cleaning your car. To prevent swirl marks, use the two-bucket method ( ruclips.net/video/1PZxu9VwlMo/видео.html ). This technique involves one bucket for soapy water and another for rinsing, allowing you to thoroughly clean your mitt between panels and avoid introducing debris to the surface. Ensure your mitt remains clean and use straight, gentle motions rather than circular ones.
@@tesbros what if I live in a apartment complex, would a touch less car wash bay booth work?
Touchless car washes won't leave swirl marks, so that's a plus. But oftentimes, they use very harsh chemicals that can shorten the life of your ppf and ceramic coating overtime if you use them often. If you can't do a full wash at home, you can do those every now and then and use a rinseless wash like ONR or our waterless wash in between washes.
ONR: www.amazon.com/Optimum-NR2010Q-Rinse-Wash-Shine/dp/B00D8DR0AO/ref=sr_1_1_sspa
Tesbros: tesbros.com/products/waterless-wax-16oz?variant=40706980151455
@@tesbros thank you. What if I don’t do the drive through touchless wash and take it into a bay wash? What would be the steps then to avoid scratches or swirls?