Believe this is the issue with mine, been a little curious over it. I've replaced these before on other cars but this one is odd. Start it any time of day, first start it will 75% of the time jump to its high rpm idle like they all do to warm up, but the engine shakes horribly and sounds like a diesel unless I rev it and hold it around 1.5-2k for a bit it'll clear up and idle fine then, or if i Just throw it in drive, floor it one or 2 good times right away and it smooths out fine. Then through out the day as I drive, its fine but at some stops it'll jump idle up and down a good I'd say 100-200 rpm difference at random, not always, and when throwing it back in park after being gone all day, it'll surge almost stall and has stalled some times but thats super rare.
There is a way to know if that sensor its bad ? I replaced the pcv valve and still can't fix the engine shake .. car runs good only on red lights it shaking a little and lose power too .. I replace already spark plugs from front but the back ones not yet
@@dannie1035 yea I have the p0306 it shows the cylinder 6 misfire something like that I replace the sparks plugs from.front side where rhe cylinder 6 is located
Believe this is the issue with mine, been a little curious over it. I've replaced these before on other cars but this one is odd.
Start it any time of day, first start it will 75% of the time jump to its high rpm idle like they all do to warm up, but the engine shakes horribly and sounds like a diesel unless I rev it and hold it around 1.5-2k for a bit it'll clear up and idle fine then, or if i Just throw it in drive, floor it one or 2 good times right away and it smooths out fine.
Then through out the day as I drive, its fine but at some stops it'll jump idle up and down a good I'd say 100-200 rpm difference at random, not always, and when throwing it back in park after being gone all day, it'll surge almost stall and has stalled some times but thats super rare.
I'm tryna find my ait on my 06 ford taurus so I can look at it n see if it needs,to be replaced
There is a way to know if that sensor its bad ? I replaced the pcv valve and still can't fix the engine shake .. car runs good only on red lights it shaking a little and lose power too .. I replace already spark plugs from front but the back ones not yet
Do you have any engine codes?
@@dannie1035 yea I have the p0306 it shows the cylinder 6 misfire something like that I replace the sparks plugs from.front side where rhe cylinder 6 is located
@@thechampion9525 ...check your spark plug wires/replace every time you change spark plugs.
Bro same af
Before you changed it, did you hear a loud vacuum sound here and there coming from this area? I am thinking my air idle control
Is bad as well.
No, I din't hear anything.
What did you find out?
What was the problem I have a 2004 ford taurus lx and I have a problem with the rpms moving up and down
That sounds lie a bad VSS sensor. I have a video on that one to. Pretty simple to replace. Mae sure you have the correct part.
Thanks I'm going to try to change it out I'll let u know if it got fixed
I wish I could've kept mine just to work on it