Thank you so much man! It means a lot. Im trying my best to provide good content as well as explainations - thats why i answer all of the comments and questions on discord - in hopes to make you guys understand more every time you visit :D
@@jaihindjaibharat4431 RUclips does allow such content - you just need to know what to look for. I've learned a big chunk of my knowledge from youtube/udemy/tryhackme/cybrary -all for free I dont have my own courses... I always tell my viewers it would be odd if i did since i usually share information for free and you can find anything you want to know on internet, so i cant recommend any specific course (but i did list some sites up) Hope that helps
This video is a sort-of-a reupload since yt took it down so i had to re-edit it and change some things for it to be back. Sorry I havent uploaded in some time (college reasons) ,but I've scheduled the next video to go public next week, as well as im editing one video rn. Tho the one im editing isnt about cybersecurity, but the one that will be released next week is. Thank you for your excitement! I hope you enjoy my content. Plus, Im giving away 3 more copies of the Hacknet game on steam - if you want one you can contact me on discord (just send me your steam name or something cause i have to add you as a friend to give it away)
@@HoxFramework I'll be looking forward to watching your new upcoming videos, I really enjoy your content and i don't really play games anymore tho so yea good luck to others with the giveaway :)
@@5entience626 Understandable, neither do I, but i have two steam accounts from before and some balance on them so i thought of giving something small away to people who might enjoy it - so hacknet came to my mind. Thank you for your support!
Professor Volt commented: "hey, can you please talk FASTER?! I had to stop and rewind, like a thousand times! WTF change your dealer or cut down on the coffee man!" Hhahahahahahahah Nah dude i talk like this cause i dont wanna waste anyone's time I cover everything - so beginners can learn while i dont waste time - so pros can learn stuff that interests them without losing time Plus I like it like this No point on leaving gaps where you hear me breathing Plus if it really bothers you you have a slow down video option on youtube - But im assuming you dont wanna use it cause it makes it too slow? If so my point is proven, if not why not?
@@HoxFramework it depends, If paying I am able to save my time, I prefer to pay. Because looking for free good quality contents requires at least our time ( time=money) . I enjoyed a lot your video :)
@@giusepperandazzo5357 i absolutely understand - what i like applying is (and this isnt for everyone, some people might dislike this) speeding up youtube videos So in case they are trashy i wasted a lot less time But in case they are good i learned something longer in a really short time
Reading package lists... finished Building a dependency tree... finished Read status information... E: The beef-xss package could not be located :Is there a solution please?
if you are using WSL there are a lot of cons to that - what distro are u using? Is it fully updated? You can try this github.com/beefproject/beef/wiki/Installation#installation
thanks man it means a lot you could let the victim to download your malware and infect their machine (fake plugin example could help there) or do you mean persist it in the browser even after reset?
@@chetangiri211 I dont plan on doing another Beef-XSS video since i've done two already, but i can add it to my list and consider doing it some time later if you want
I am getting this error how to solve System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down
Something might have happened to your SystemD or something requires it and you dont have it (which is less likely) It has nothing to do (it seems) with the programs - but what it could be is that one of the software requires a system with SystemD - so if you are on (for example) arch system without systemD you wont be able to run it But again i dont think that SHOULD be the case, so try googling it and let me know how it goes
Hi, I loved this video but there is a little problem. The audio is towards the left speaker, and that is a bit annoying, please fix it... Maybe you recorded on stereo. You can just put the audio in audacity and split to mono, and it would fix it, Very Informative video tho, :))
Oh snap! I didnt even notice that! I actually used my microphone and it should have been centered which is odd - i even recorded 2 more videos with that microphone ... But its not a problem, I have an idea which i think should work to fix that problem! So thank you so much for pointing this out! Also if you want a free copy of "Hacknet" game on Steam you can contact me on Discord - im currently giving away 3 more copies. Anyways thanks a lot man
btw, at 0:43 when you launched your terminal i saw kali's logo as ASCII art. how can i achieve that, i also have parrot & ubuntu. Appreciate your efforts.❤
The tool in question is "neofetch" You can also use a less colorful version "superfetch" if you prefer simplicity. Or you can make it completely colorful by combining neofetch and lolcat :) Thanks a bunch!
I would have appreciated more explanation on the network side and how to initially import the html because you have to save and move it with a different folder. sudo mv * /var/www/html with an empty folder with the .html saved to get the spoofed page. But when I tried to do it on my host machine and not just the same vm the apache2 website timed out. Would have appreciated a more realistic demo because of course it's going to work within the same vm.
The only thing more realistic than this would be hosting it worldwide Doing that is a no-no according to the law If you mean just locally tho then it should be as simple as allowing your VM to take part in your real network I assumed most people knew linux and networking pretty well before going into these kinds of vids- not saying you dont, just saying some things were implied. ((I know you'd say thats not a great way to teach but to be fair i cant cover everything - nor can i remember everything xD)) Either way I am sorry about the misunderstanding, I'll try to be more clear in the future videos - I do make them longer now in order to cover more than just the topic, to go into detail more... Also if you still need help let me know. I dont mean to discourage anyone from learning. Apologies, again
hey a question if i execute js on the webpage victim is it gona have a high previlige like the previlege of extensions? fake user interaction and still the browser counts it as a istrusted event
Hey there, i did all thinks right, i was following your steps, but the WEB UI link doesnt work. it show me this: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down and this: [i] GeoIP database is missing [i] Run geoipupdate to download / update Maxmind GeoIP database thanks for any help :)
Something seems to be wrong with your systemd - which is used by the system to (long story short) organize a bunch of stuff and make a bunch of stuff possible - id honestly recommend you to reinstall kali (or whatever distro ur running) cause thats (unironically) the easiest way Are you using WSL ? Cause on WSL this is a common issue GeoIP database shouldnt be a problem - to be honest if you get the IP you can just use free ip location lookups online
I have many questions to ask. 1) Why are we using the bettercap tool with beef? 2) Why won't the hook link work with anyone other than my own device? 3) How can I hook anyone outside my own internet ? 4) Can we modify the hook url by any chance so that it looks decent? 5) Can this exploit be traced by any chance? btw, thank you :)
- Cause bettercap mitm-s and beef hooks - it will, you gotta know some networking. If someone is in your internal network you will be able to hook them. If they are outside then you need some sort of a bridge - like maybe ngrok to your website which has the hook inside - Just answered that up there. But to be fair you DO have to keep it legal, i dont support illegal activities. Bettercap is not needed if you are going worldwide - only in your internal network if you wanna hook others - You dont have to modify the hook url since it can be in website's code. It refers to a JS file - Its not an exploit, but yes more or less everything can be traced - if u used a DDNS service of sorts and signed up for it with a VPN then maybe you'd be safe but even then its questionable what kinda results would you have and what kinda info would you be able to extract - again, KEEP IT LEGAL.
@@HoxFramework So im using an Alpha adapter, i installed drivers and everything its working fine. but im trying to connect to my wifi network so i can test out beef on my desktop as host. But when i try to connect to wifi it doesnt work and just freezes my kali pretty much. (ex. im unable to view iwconfig or ifconfig (anything) if you can help any way that would be awesome:) ty
@@rush1119 Thats really odd behaviour, it definitely shouldnt happen. Are using the latest version of kali ? Can you run any other commands at all? Did you forward the Adapter to the VM (if you are using one)? Thats really odd i gotta admit
@@HoxFramework not sure what you mean by forwarding the adapter. -i plugged it in the laptop installed drivers -and updated && upgraded. -run it as usb where the device tab is.. -it works to sniff nearby wifi but when i go to connect to one it just gives me a loading wheel where it displays internet on kali.. im trying to connect to my home wifi so i can be on the same network to use my desktop as a lab
2 options: follow this answer: askubuntu[[.]]com/questions/1379425/system-has-not-been-booted-with-systemd-as-init-system-pid-1-cant-operate (remove [[ ]]) OR Run your kali from a virtualbox VM (since im assuming you are running WSL) (or you could just reinstall your kali - which id recommend, your error seems to be tied to systemd or similar - without it system works poorly and it doesnt seem to start right on your system
is there a way to make them still hooked even if they close the browser and when they open it again they get hoocked ? something like a start up persistence
there are ways, i dont exactly remember - i think they are even built in the beef-xss But if they aren't you can just code them yourself, since injecting custom js is allowed
is that working for external network ? what if i'm using port forwarding setup in my router to my external ip adress ? like redirect victim to my external ip adress (router ) then router will redirect the victim to my machine plz i want some inswers and good luck
MITM is mostly for your own network. thats what its made for. Its really really unlikely you'll go above that - it would mean you'd have to be able to arp spoof your ISP or whatever -good luck with that- what i mean to say is this wont work As far as beef xss goes that might be aplicable to someone outside of your network id say - but i never tried that because its illegal and pentests dont require me to do that kind of testing-
beef and beef are default creds, you must have changed them you can change the password (if i remember correctly) in /usr/share/beef-xss (or wherever your beef-xss is) inside config.yaml - there you should see Credentials
the online version of my beef isn't working, each time i put the username and password, it loads a bit and stops. and can i get the targets browsing history with BEeF?
im not sure what you are saying Check if you arp spoof works at all for your network - does it capture HTTP packets (Not https, http!) - you can check with wireshark after running bettercap and arpspoof in it Im not sure about the browsing history, i think it could be possible but i havent tried
Any idea why my beef isn’t working. I run it in a linode server. The link works like it is meant to for example I get the information about the drive that clicked such as browser engine and so forth. However the commands do not work at all when I send them nothing comes up on the other computer. Any help would be appreciated!!!!!
Are you testing the commands on yourself? Test it on yourself first, see if that works - maybe your victim disconnects from the tab. I mentioned that (initially) beef works only on that tab the victim is on - in combination with bettercap this can be more efficient, but the best way would be to use beef to auto-spread in any way you can (there are some commands that can help you with this, you should find a way to auto-run them)
BEEF has ways of hooking the machine further, you could hook it to other tabs there is even a function for that - i mentioned this in the video Also what you could do is start bettercap for every http website and just inject the JS script that connects beef with it - that helps you can also pop up a warning box if the victim attempts to quit the browser You could also automate things with The Autorun Rule Engine (ARE) (github[.]com/beefproject/beef/wiki/Autorun-Rule-Engine) I hope this helps
Hey man it s a great content. But I have a problem. When victim pc uses chrome or edge my hook going offline it stays in online only if victim pc uses internet explorer. Do you know how to fix that?
If the person leaves the browser tab (where they got hooked) (and if you didnt hook them further) then it will go offline as i mentioned some browsers (especially if updated) will prevent some of Beef's actions So internet explorer might be considered as older, but i've shown that it CAN work on firefox and chrome you just have to be lucky and the victim has to be unlucky or have an older version of the browser or just visit http sites where your hook is and not get interrupted by their browser defending them
@@BelkEpizy I mentioned in the video that there are SOME persistence methods but its probably not gonna be perfect tbh if you want real persistence your best bet is probably to compromise the pc legally.
Its saying this: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down and the my browser its showing this: This site can’t be reached 127.0.0.1 refused to connect. Try: Checking the connection ERR_CONNECTION_REFUSED I tried to post this to beef issues in github idk my os is mobile I use UserLAnd to boot up kali
Beef is by default on the localhost - if you wanna make sure it works on apache you need your hook on the apache server's site (var www html thing i mentioned in the video) I dont understand what you mean with the exe if you want to inject an exe using scripts from beef first you need to establish a beef hook Let me know if that helps!
If you wanna go outside your network you'd have to use something like ngrok or whatever ideally a paid hosting server or if you wanna stay more hidden noip or smthn That being said please keep things legal.
Thats odd - i havent faced an issue like that There can be two fixes - if its beef's fault then just reinstall it (trust me thats the easiest way) However what could also happen is you didnt navigate to beef instead you navigated to some blank page - make sure its the beef URL (but since im assuming that isnt the case ill go ahead and recommend a reinstall) Also Perhaps you mean when entering a different IP ? Like if you are going wider than locally? Maybe that could be the case Reply with more info if this doesnt help
When I try Opening my Beef link on a different browser that isn’t kali Linux it doesn’t load for me. Is Beef only got kali? Or I’m I doing something wrong?
Also When I put my Script code into my website and I upload to my website, the actually website loads while the script doesn’t inject and doesn’t pop up on beef
Yes because beef is hosted on your localhost from what I know, you can try accessing via your internal ip maybe since the listening is acting like a server probably - but keep in mind that the machines should be on the same network
You can unhook the browser from the beef interface (website on 127.0.0.1) - its a simple click, not sure where but you can easily figure that out (maybe right-click the victim's ip and see whats there) As for will the files stay - what do you mean - if you downloaded something from victim PC - yes.
Havent tried, probably requires some port forwarding or a DDNS or whatever But bettercap is focused on your network anyway so this doesnt make much sense, unless you wanna run beef on its own
hey bro i need help i accidently set a password and i dont remember the password how do i check my password or how do i reinstall beef-xss? please help me
Your kali password? I think you can change it on boot (www.javatpoint.com/kali-linux-root-password-reset) As for reinstalling beef i assume you can do it using apt apt-get remove beef-xss you can also do purge
Your better cap method is cool but won't work I'm a real sanario not that we would want it to buy for the purpose of testing. This won't work remotely of course. If your on the same network you might be able to force http but usually it doesn't work anymore even if you gain access to the router and change the settings to use http instead of HTTPS it just defaults to HTTPS on every website like Facebook etc
The network you are in - im using my adapter meaning whoever is in my network (You could specify a custom victim as well if you wanted to) The idea of this is to be an advanced MITM attack
make a html page and in it put script tags, make sure that the victim can access beef - thats why you dont reference 127.0.0.1 or localhost -noone can reach that but you You need to make sure you beef resources can be reachable Meaning if the victim is in the same network put your internal IP and beef hook's port and location I mentioned all of this in the video tho im not sure what doesnt work for you specifically and what you have done about it
i cant hook anything outside of my vm to beef. I can hook my firefox to beef inside kali, and chromium, just not anything on my windows 10 pc. This site can’t be reached10.0.2.15 took too long to respond. Try: Checking the connection Checking the proxy and the firewall Running Windows Network Diagnostics ERR_CONNECTION_TIMED_OUT
@@davidvideos1359 Something must have went wrong, but in the end all you need is your attacker machine to be in the same network as victim machines - so try some combinations I even used an external adapter that i passed trough as an USB - then used it to connect to my own wifi or you can ping your machines to see if they get pinged Hope that helps
@@HoxFramework So im using an Alpha adapter, i installed drivers and everything its working fine. but im trying to connect to my wifi network so i can test out beef on my desktop as host. But when i try to connect to wifi it doesnt work and just freezes my kali pretty much. (ex. im unable to view iwconfig or ifconfig (anything) if you can help any way that would be awesome:) ty
Hello buddy...😅 I kinda don't know my user or my password. You know how I can change it? (Btw, I aprreacite you still answering instantly after 2 years.)
Hey man Im not sure i never needed to change the password but i've just googled it: the username/password are set in the config.yaml file. Check for the line with 'credentials:' on it. sudo nano /usr/share/beef-xss/config.yaml (or something similar) Thanks!
I think i got hcked 😭 i clicked on a link that i received from an unknown phone number but i exited after about 1 minute (just visited the website, didn't do or enter anything), how can i know if i got hackd 😭🙏 what happens exactly when i access the link, do the hackr have full control of my phone, please help 🙏😭
Check with an antivrirus, look at your incomming/outgoing connections and see if anything was installed on that date Depends on what kinda link, cant tell Try contacting your national CERT too
@@z2.060 I cant tell you that since i dont know what kind of URL is he using. Hypothetically he could if you downloaded something - if you just visited a URL it should be fine if you leave it soon enough, again - depending on whats on it. There is a wide range
@@HoxFramework I figured out a way to be honest to create the https hook but what do you mean hox I know what mitmproxy is but how would I sslstrip using mitmproxy whaaaaat that’s possible
@@jimgrayson4828 If you install a certificate on the victim's pc you should technically be able to monitor https traffic without ssl stripping Thats what mitmproxy is most useful for
@@HoxFramework It doesnt even really hack your web browser, all it does is "hack" the tab that youre on. The worst thing that it does is setting up a phishing site that someone can fall for, and steal all info relating to your device including your IP Address. It is really only damaging if youre injecting the script into websites, maybe via XSS (Cross-site scripting). Also Man in the middle attacks where youre injecting the script onto every website for the person, and stealing all the cookies. But thats it, it doesn't do a whole lot of damage lol. All you have to do is simply exit out of the tab.
@@HoxFramework It doesnt even really hack your web browser, all it does is "hack" the tab that youre on. The worst thing that it does is setting up a phishing site that someone can fall for, and steal all info relating to your device including your lP Address. But thats it, it doesn't do a whole lot of damage lol. All you have to do is simply exit out of the tab.
var is a folder /var/www/html are all folders you need to copy a file into the html folder which is inside www, which is inside var You are gonna have to know the basics of basics of using linux in order to do stuff like this
it means you need to install beef Find a tutorial online and follow it From what i've gathered you can probably install it with apt Older distroes came with beef pre-installed.
I dont like wasting people's time Most of my viewers already know half the stuff - they are just here for the other half So i make sure to say what i have to without taking any breaks :)
@@HoxFramework Cause with Kali installed on a virtual machine for example : VirtualBox it will just make a simulation of Kali Linux, so that means Beef it's simulated too, That's why it doesn't harm your PC.
@@K11d602 I'm sure there is nothing wrong with Beef's source code, and it does affect your host pc since it affects my browser in the video Im not sure what you are getting at
bro you really have to slow down and go into in depth detail on how to set the apache server how to put the files in the the html folder it needs to be in depth
I explained all of that in the video, plus its purely basic stuff so i wouldnt spend too much of your time on it (all you have to do is run apache : service apache2 start ; then move anything you need to the /var/www/html : mv *something* /var/www/html/ But you are right i did talk fast - i do this on purpose, i like my videos to be "no bullsh*t" and "no time wasted" I make sure i cover everything, yet talk fast enough not to have a 40min video that could be done in 20 minutes if i didnt talk slow I understand this might be an issue for pure beginners, but feel free to slow down the video - for other viewers (those who are a bit more advanced) they will appreciate faster talking since they know how to start apache and move a file to its folder I hope you understand - its for my videos to be all quality without messing around. I have few vids called "no rush computer stuff" and i do everything with regular speed there, however they arent my primary thing since a bunch of yt channels do that I've done a stream yesterday - on streams i take it slow and answer all questions as i go - so tune in if you want to visit a stream here and there :) Hope this helps
Sorry to hear that, feel free to speed-down my video (ex. 0.75x) I make sure my videos are very no-bullshit and no-timewaste oriented so that beginners to pros can watch it without feeling sorry about their time
@@HoxFramework He's right, you talk little too fast and everything is just flashing across the screen, the aim is not to go fast, just slow dow,n and going slower doesn't waste your viewers time, Freecodecamp videos are hours
@@kestonsmith1354 I know and i understand you but im the type of person to easily get bored so i make my videos to be interesting to me all the time. You know how like a Mr.Beast video has a lot of content shoved in your face - i know its not a great example but its a point on keeping your viewers interested over concentrated lets say - Ofcourse i know this isnt ideal, since learning takes more caution but thats where the problem with the range my viewers cover comes in place: I have viewers that are beginners and viewers that are experts so i dont wanna waste expert's time and yet i wanna explain every single small part and hint to beginners. Its difficult to find the middle ground but lately i have slightly decreased my speed - you can notice that in my latest video (and the new one upcomming) These are my thoughts - let me know what you think. Im always open to hear new opinions and points where i can improve myself. That being said - keep in mind that I do wanna stay different than thousands of other channels :) Again - thanks for commenting! Have a nice day bro
@@HoxFramework The thing is that there are beginners than they are experts in the field. That's why alot of videos from creators in this space take a more beginner friendly approach but I do understand that you can get bored, so what I would suggest is make a series or chop up it up into videos. If someone is following along well in part 1 , they're more likely to watch part 2 and part 3. Whereas if the video is more than 20 mins long and the person have to keep rewinding to understand what's being said then or the steps carried out, it's unlikely they will finish the video. That's just my suggestion .
@@kestonsmith1354 Hm you mean like divide videos into specific types? Like some for advanced some for not advanced? But thats another problem most of my videos would be like 30 minutes or more since i really wanna explain everything and make sure i dont miss out (i dont like tutorials where people just show when it works and say nothing else, i wanna also show what happens when it doesnt work & similar) But i completely understand your point and i do take it as a valid one. Let me know what you think of my new video - is it too fast or is the talking temp okay? I appreciate the suggestions man! Thanks!
@@dayshag5257 There's your answer If your arpspoof doesnt work it means you are getting blocked by your router - i've mentioned this in the video. Before MITM-ign first make sure your arp spoof works.
Sorry about that, explained it quickly on purpose - so people who already know dont have to spend too much time listening to what they know, and yet tried to cover everything so new learners can grasp it all quickly. I could do it slower if you want to but you can also slow down the vid a bit and it should do the trick, anyways thanks for watching man! Let me know if you have any questions or anything
Hey Hox, i just wanna ask what to do if i type in bettercap and it says permission denied. I tryed it by doing sudo bettercap but my http.proxy.sslstring, and the injectjs doesnt do anything.
I dont think scripts have anything to do with permissions, if you ran it with sudo everything should run well as for why your scripts dont work - make sure you check if anything else works - if the browser blocks arp spoofing you most likely wont be able to run these scripts
This is scary asf.
ikr
Good job! I love how you explain everything! You are original! I like your content so much!
Thank you so much man! It means a lot.
Im trying my best to provide good content as well as explainations - thats why i answer all of the comments and questions on discord - in hopes to make you guys understand more every time you visit :D
Bro my JavaScript is injected but beef is not showing online browser it show only when I open Apache html page please any views 😊
Bro you're great and also my favourite Pearson providing us the best knowledge
Thank you, means a lot!
@@HoxFramework bro do you have you paid cources or any other for beginners hacker RUclips does not allow such content
@@jaihindjaibharat4431 RUclips does allow such content - you just need to know what to look for. I've learned a big chunk of my knowledge from youtube/udemy/tryhackme/cybrary -all for free
I dont have my own courses... I always tell my viewers it would be odd if i did since i usually share information for free and you can find anything you want to know on internet, so i cant recommend any specific course (but i did list some sites up)
Hope that helps
Holy shit I've missed your videos dude, so excited to watch this!
This video is a sort-of-a reupload since yt took it down so i had to re-edit it and change some things for it to be back.
Sorry I havent uploaded in some time (college reasons) ,but I've scheduled the next video to go public next week, as well as im editing one video rn. Tho the one im editing isnt about cybersecurity, but the one that will be released next week is. Thank you for your excitement! I hope you enjoy my content.
Plus, Im giving away 3 more copies of the Hacknet game on steam - if you want one you can contact me on discord (just send me your steam name or something cause i have to add you as a friend to give it away)
@@HoxFramework I'll be looking forward to watching your new upcoming videos, I really enjoy your content and i don't really play games anymore tho so yea good luck to others with the giveaway :)
@@5entience626 Understandable, neither do I, but i have two steam accounts from before and some balance on them so i thought of giving something small away to people who might enjoy it - so hacknet came to my mind.
Thank you for your support!
No matter where in the HTML file I put my hook, it wouldn’t detect any device when I open the page on with it, any ideas what might need tweaking?
If you are using Brave you need to turn off the shield.
Great video mate 😊
wowwwww... .you are the best person for me right now, Thank youu
Professor Volt commented: "hey, can you please talk FASTER?! I had to stop and rewind, like a thousand times! WTF change your dealer or cut down on the coffee man!"
Hhahahahahahahah
Nah dude i talk like this cause i dont wanna waste anyone's time
I cover everything - so beginners can learn
while i dont waste time - so pros can learn stuff that interests them without losing time
Plus
I like it like this
No point on leaving gaps where you hear me breathing
Plus if it really bothers you you have a slow down video option on youtube - But im assuming you dont wanna use it cause it makes it too slow? If so my point is proven, if not why not?
I watch videos at 3x speed this one was possible only with 1.8
I get taken to the apache page instead of the beef index page. How to fix this?
i think beef index is at another port -or if you are talking about index.html you cloned from somewhere and you dont see that ?
i just open the link that it provides when opening the site to the beef index page@@HoxFramework
Sorry to hear about your reupload, but anyway Thanks a ton.
bro you great thanks this helped me thank god i saw your vid
Well explained for beginners.Hey make one about WAN beef using ngrok multtunnelling also.
I've added that idea to the list of videos, but its not in the top 10 so it might wait a bunch
I used it with Blackeye and they blocked my account in ngrok 😢 haha
@@andresarredondo2762 why did they block your account
better than some paid content! good job!!!!
Free is always better hehe
Hope you enjoyed the video
@@HoxFramework it depends, If paying I am able to save my time, I prefer to pay. Because looking for free good quality contents requires at least our time ( time=money) . I enjoyed a lot your video :)
@@giusepperandazzo5357 i absolutely understand - what i like applying is (and this isnt for everyone, some people might dislike this) speeding up youtube videos
So in case they are trashy i wasted a lot less time
But in case they are good i learned something longer in a really short time
@@giusepperandazzo5357 but what i meant with my first comment was Linux (compared to win for example) xD
Reading package lists... finished
Building a dependency tree... finished
Read status information...
E: The beef-xss package could not be located :Is there a solution please?
if you are using WSL there are a lot of cons to that - what distro are u using? Is it fully updated?
You can try this github.com/beefproject/beef/wiki/Installation#installation
Unable to see other connected browsers at Beef-UI in a WAN
It’s a very good video but the only problem is i cannot open that link on any other device than Linux,is there any solution for it?
Bro is Pro
Hey Hox, lots of love and due respect...
Is it possible to gain persistence even after victim closes browser?
thanks man it means a lot
you could let the victim to download your malware and infect their machine (fake plugin example could help there)
or do you mean persist it in the browser even after reset?
@@HoxFramework I mean persist on the browser
@@chetangiri211 While the browser is open yes, after its turned off im not sure, havent tried it
@@HoxFramework would you mind trying it on Android?
It would be huge support ❤️❤️
@@chetangiri211 I dont plan on doing another Beef-XSS video since i've done two already, but i can add it to my list and consider doing it some time later if you want
whats the username for beef?
i think its "beef" with password "beef"
I am getting this error how to solve
System has not been booted with systemd as init system (PID 1). Can't operate.
Failed to connect to bus: Host is down
System has not been booted with systemd as init system (PID 1). Can't operate.
Failed to connect to bus: Host is down
Something might have happened to your SystemD or something requires it and you dont have it (which is less likely)
It has nothing to do (it seems) with the programs - but what it could be is that one of the software requires a system with SystemD - so if you are on (for example) arch system without systemD you wont be able to run it
But again i dont think that SHOULD be the case, so try googling it and let me know how it goes
Hi, I loved this video but there is a little problem. The audio is towards the left speaker, and that is a bit annoying, please fix it... Maybe you recorded on stereo. You can just put the audio in audacity and split to mono, and it would fix it, Very Informative video tho, :))
Oh snap! I didnt even notice that!
I actually used my microphone and it should have been centered which is odd - i even recorded 2 more videos with that microphone ... But its not a problem, I have an idea which i think should work to fix that problem! So thank you so much for pointing this out! Also if you want a free copy of "Hacknet" game on Steam you can contact me on Discord - im currently giving away 3 more copies.
Anyways thanks a lot man
@@HoxFramework No problem bro, I don't really play games, but would love to know if there is a trick or something!
Love your videos
@@PratyakshaBeri Thanks a lot man
btw, at 0:43 when you launched your terminal i saw kali's logo as ASCII art. how can i achieve that, i also have parrot & ubuntu. Appreciate your efforts.❤
The tool in question is "neofetch"
You can also use a less colorful version "superfetch" if you prefer simplicity.
Or you can make it completely colorful by combining neofetch and lolcat :)
Thanks a bunch!
@@HoxFramework Will surely check them out. Thanks a lot man, appreciate your hard work and knowledge. SO GLAD I FOUND YOUR CHANNEL.
Hi, How do you get to the download page with the index because I don't have the same as you how to do it ?
Password of beef????
What
I would have appreciated more explanation on the network side and how to initially import the html because you have to save and move it with a different folder. sudo mv * /var/www/html with an empty folder with the .html saved to get the spoofed page. But when I tried to do it on my host machine and not just the same vm the apache2 website timed out. Would have appreciated a more realistic demo because of course it's going to work within the same vm.
The only thing more realistic than this would be hosting it worldwide
Doing that is a no-no according to the law
If you mean just locally tho then it should be as simple as allowing your VM to take part in your real network
I assumed most people knew linux and networking pretty well before going into these kinds of vids- not saying you dont, just saying some things were implied. ((I know you'd say thats not a great way to teach but to be fair i cant cover everything - nor can i remember everything xD))
Either way I am sorry about the misunderstanding, I'll try to be more clear in the future videos - I do make them longer now in order to cover more than just the topic, to go into detail more...
Also if you still need help let me know. I dont mean to discourage anyone from learning.
Apologies, again
Dope
hey a question if i execute js on the webpage victim is it gona have a high previlige like the previlege of extensions? fake user interaction and still the browser counts it as a istrusted event
javascript executes in the browser, if you get a shell - then yes probably you are on a user-level
@@HoxFramework what do you mean if i get a shell?
Hey there, i did all thinks right, i was following your steps, but the WEB UI link doesnt work. it show me this:
System has not been booted with systemd as init system (PID 1). Can't operate.
Failed to connect to bus: Host is down
and this:
[i] GeoIP database is missing
[i] Run geoipupdate to download / update Maxmind GeoIP database
thanks for any help :)
Something seems to be wrong with your systemd - which is used by the system to (long story short) organize a bunch of stuff and make a bunch of stuff possible - id honestly recommend you to reinstall kali (or whatever distro ur running) cause thats (unironically) the easiest way
Are you using WSL ? Cause on WSL this is a common issue
GeoIP database shouldnt be a problem - to be honest if you get the IP you can just use free ip location lookups online
The beef is command
what do you mean with that comment
I have many questions to ask.
1) Why are we using the bettercap tool with beef?
2) Why won't the hook link work with anyone other than my own device?
3) How can I hook anyone outside my own internet ?
4) Can we modify the hook url by any chance so that it looks decent?
5) Can this exploit be traced by any chance?
btw, thank you :)
- Cause bettercap mitm-s and beef hooks
- it will, you gotta know some networking. If someone is in your internal network you will be able to hook them. If they are outside then you need some sort of a bridge - like maybe ngrok to your website which has the hook inside
- Just answered that up there. But to be fair you DO have to keep it legal, i dont support illegal activities. Bettercap is not needed if you are going worldwide - only in your internal network if you wanna hook others
- You dont have to modify the hook url since it can be in website's code. It refers to a JS file
- Its not an exploit, but yes more or less everything can be traced - if u used a DDNS service of sorts and signed up for it with a VPN then maybe you'd be safe but even then its questionable what kinda results would you have and what kinda info would you be able to extract - again, KEEP IT LEGAL.
@@HoxFramework thank you sir
@@HoxFramework So im using an Alpha adapter, i installed drivers and everything its working fine. but im trying to connect to my wifi network so i can test out beef on my desktop as host. But when i try to connect to wifi it doesnt work and just freezes my kali pretty much. (ex. im unable to view iwconfig or ifconfig (anything)
if you can help any way that would be awesome:) ty
@@rush1119 Thats really odd behaviour, it definitely shouldnt happen. Are using the latest version of kali ? Can you run any other commands at all? Did you forward the Adapter to the VM (if you are using one)?
Thats really odd i gotta admit
@@HoxFramework not sure what you mean by forwarding the adapter.
-i plugged it in the laptop installed drivers -and updated && upgraded.
-run it as usb where the device tab is..
-it works to sniff nearby wifi but when i go to connect to one it just gives me a loading wheel where it displays internet on kali.. im trying to connect to my home wifi so i can be on the same network to use my desktop as a lab
I try to open beef website but it says system cannot operate because init system (PID 1) can’t operate. Failed to connect to bus: host is down
2 options:
follow this answer:
askubuntu[[.]]com/questions/1379425/system-has-not-been-booted-with-systemd-as-init-system-pid-1-cant-operate
(remove [[ ]])
OR
Run your kali from a virtualbox VM
(since im assuming you are running WSL)
(or you could just reinstall your kali - which id recommend, your error seems to be tied to systemd or similar - without it system works poorly and it doesnt seem to start right on your system
why the admin panel dont open ?
is there a way to make them still hooked even if they close the browser and when they open it again they get hoocked ? something like a start up persistence
there are ways, i dont exactly remember - i think they are even built in the beef-xss
But if they aren't you can just code them yourself, since injecting custom js is allowed
is that working for external network ? what if i'm using port forwarding setup in my router to my external ip adress ? like redirect victim to my external ip adress (router ) then router will redirect the victim to my machine plz i want some inswers and good luck
MITM is mostly for your own network. thats what its made for. Its really really unlikely you'll go above that - it would mean you'd have to be able to arp spoof your ISP or whatever -good luck with that- what i mean to say is this wont work
As far as beef xss goes that might be aplicable to someone outside of your network id say - but i never tried that because its illegal and pentests dont require me to do that kind of testing-
I tried beef and beef but it's wrong
beef and beef are default creds, you must have changed them
you can change the password (if i remember correctly) in /usr/share/beef-xss (or wherever your beef-xss is) inside config.yaml - there you should see Credentials
dont stop your magic you'r soo goooooooooooooooood
thank you very much man!!
the online version of my beef isn't working, each time i put the username and password, it loads a bit and stops. and can i get the targets browsing history with BEeF?
im not sure what you are saying
Check if you arp spoof works at all for your network - does it capture HTTP packets (Not https, http!) - you can check with wireshark after running bettercap and arpspoof in it
Im not sure about the browsing history, i think it could be possible but i havent tried
Any idea why my beef isn’t working. I run it in a linode server. The link works like it is meant to for example I get the information about the drive that clicked such as browser engine and so forth. However the commands do not work at all when I send them nothing comes up on the other computer. Any help would be appreciated!!!!!
Are you testing the commands on yourself? Test it on yourself first, see if that works - maybe your victim disconnects from the tab. I mentioned that (initially) beef works only on that tab the victim is on - in combination with bettercap this can be more efficient, but the best way would be to use beef to auto-spread in any way you can (there are some commands that can help you with this, you should find a way to auto-run them)
@@HoxFramework thanks for the response man I finally got it sorted and yes I was testing it in myself
@@ggquack8176 Glad to hear that bro
why doesnt my hook url work on other peoples browsers like google etc, it only works on my kali linux browser.
probably because you are using your local IP
once the target closes the infected tab, you get unhooked, how to overcome that?
BEEF has ways of hooking the machine further, you could hook it to other tabs there is even a function for that - i mentioned this in the video
Also what you could do is start bettercap for every http website and just inject the JS script that connects beef with it - that helps
you can also pop up a warning box if the victim attempts to quit the browser
You could also automate things with The Autorun Rule Engine (ARE) (github[.]com/beefproject/beef/wiki/Autorun-Rule-Engine)
I hope this helps
Hey man it s a great content. But I have a problem. When victim pc uses chrome or edge my hook going offline it stays in online only if victim pc uses internet explorer. Do you know how to fix that?
If the person leaves the browser tab (where they got hooked) (and if you didnt hook them further) then it will go offline
as i mentioned some browsers (especially if updated) will prevent some of Beef's actions
So internet explorer might be considered as older, but i've shown that it CAN work on firefox and chrome you just have to be lucky and the victim has to be unlucky or have an older version of the browser or just visit http sites where your hook is and not get interrupted by their browser defending them
@@HoxFramework Ok thank you.
@@HoxFrameworkhow do you hook them further?
@@BelkEpizy I mentioned in the video that there are SOME persistence methods but its probably not gonna be perfect
tbh if you want real persistence your best bet is probably to compromise the pc
legally.
Its saying this:
System has not been booted with systemd as init system (PID 1). Can't operate.
Failed to connect to bus: Host is down
System has not been booted with systemd as init system (PID 1). Can't operate.
Failed to connect to bus: Host is down
and the my browser its showing this:
This site can’t be reached
127.0.0.1 refused to connect.
Try:
Checking the connection
ERR_CONNECTION_REFUSED
I tried to post this to beef issues in github idk my os is mobile
I use UserLAnd to boot up kali
Yeah that means you arent using SystemD - which is usually behind most debian-based systems
im assuming u've modified your kali not to use systemD?=
prejebeno 😎👍
good job, thx
🎉🎉
I want to put mi .exe file in the folder but it does not work for me, it is like Beef is the localhost and not the apache2. can you help me please?
Beef is by default on the localhost - if you wanna make sure it works on apache you need your hook on the apache server's site (var www html thing i mentioned in the video)
I dont understand what you mean with the exe
if you want to inject an exe using scripts from beef first you need to establish a beef hook
Let me know if that helps!
hello i hawe kind of problem with that when i write command for starting appache2 it does nothing
pls any help ?
run:
service apache2 status
to see if its running
Real information and scary, is it important to send this link in a same LAN ?, like can I send this to some one not in my network?
If you wanna go outside your network you'd have to use something like ngrok or whatever
ideally a paid hosting server or if you wanna stay more hidden noip or smthn
That being said please keep things legal.
@@HoxFramework thanks for the information ℹ️
@@HoxFramework hey i know this was years ago but do you need to do port forwarding to send this to other networks?
@@skrublord99 bettercap doesnt work on other networks as far as i know its a mitm-kinda tool
Beef on the other hand - i assume so
heyyyy hox this is probably just my mistake but when i open my ui panel its stuck at a white screen how do i fix that
Thats odd - i havent faced an issue like that
There can be two fixes - if its beef's fault then just reinstall it (trust me thats the easiest way)
However what could also happen is you didnt navigate to beef instead you navigated to some blank page - make sure its the beef URL
(but since im assuming that isnt the case ill go ahead and recommend a reinstall)
Also
Perhaps you mean when entering a different IP ? Like if you are going wider than locally? Maybe that could be the case
Reply with more info if this doesnt help
When I try Opening my Beef link on a different browser that isn’t kali Linux it doesn’t load for me. Is Beef only got kali? Or I’m I doing something wrong?
Also When I put my Script code into my website and I upload to my website, the actually website loads while the script doesn’t inject and doesn’t pop up on beef
Yes because beef is hosted on your localhost from what I know,
you can try accessing via your internal ip maybe since the listening is acting like a server probably - but keep in mind that the machines should be on the same network
Dude love your content but omg the keyboard sounds give me anxiety lol
Hhahahhahah
some people seem to like it
but either way in newer vids there is no keyboard sounds :)
Do you know what could cause the issue of Bettercap now detecting my gateway??
maybe your VM's network settings arent well set up, or you didnt provide the right interface when running bettercap
Great stuff! I listened at 1.5x speed because the pace is too slow.
Legendary move bro, respect.
There's a way to know if my browser got hooked? Nice vid
You'll see it in the list of victims on beef
You need a server to combine the msfvenom to control😊
what
how do i remove a hooked browser and will it leave files on my computer if i hook my own browser
You can unhook the browser from the beef interface (website on 127.0.0.1) - its a simple click, not sure where but you can easily figure that out (maybe right-click the victim's ip and see whats there)
As for will the files stay - what do you mean - if you downloaded something from victim PC - yes.
Please make vd for pivoting and advanced techniques red team and more tools for CyberSecurity advanced
How do you allow BeEF to access devices outside of your LAN?
Havent tried, probably requires some port forwarding or a DDNS or whatever
But bettercap is focused on your network anyway so this doesnt make much sense, unless you wanna run beef on its own
Yes i ve been trying to run beef on its own@@HoxFramework
When I put the inet website in it puts me in another website and it dosent show it please help
Im not exactly sure what you are saying - what do you mean "puts me in another website" and "it doesnt show" ?
how to hook beef url to a victim's device?
I've said it in the video
Its either by visiting the site that has the hook injected - or the same thing but with some mitm
beef browser ui never opens for me on any browser, strange.
you can try entering it manually
or do you mean the site wont load?
are you entering on a correct port and host?
For me it won’t open it in google
what
What Linux version are you using? Linux Lite?
Kali Linux
@@HoxFramework Thanks, I will create a vm!
hey bro i need help i accidently set a password and i dont remember the password how do i check my password or how do i reinstall beef-xss? please help me
Your kali password? I think you can change it on boot (www.javatpoint.com/kali-linux-root-password-reset)
As for reinstalling beef i assume you can do it using apt
apt-get remove beef-xss
you can also do purge
Your better cap method is cool but won't work I'm a real sanario not that we would want it to buy for the purpose of testing. This won't work remotely of course. If your on the same network you might be able to force http but usually it doesn't work anymore even if you gain access to the router and change the settings to use http instead of HTTPS it just defaults to HTTPS on every website like Facebook etc
I mentioned all of that in the video
I didnt mention going worldwide with this
But good of you to point out, thanks
Hey Hox, beef-xss is the same with beef?
beef xss and beef are the same thing yes, i just say "beef" cause i dont wanna have to say xss every time
I am not able to hook as it internet doesn't give permission
im not sure what you mean by "internet"
Kralju istog sekunda kad sam video da si nas odma sub :D
nemoj govorit okolo xD
Can you update the tutorial coz it aint working anymore
What isnt working for you?
i didnt understand. Who is the target?
The network you are in - im using my adapter meaning whoever is in my network
(You could specify a custom victim as well if you wanted to)
The idea of this is to be an advanced MITM attack
i cant get the beef script to work in a web page, how does it work?
make a html page and in it put script tags, make sure that the victim can access beef - thats why you dont reference 127.0.0.1 or localhost -noone can reach that but you
You need to make sure you beef resources can be reachable
Meaning if the victim is in the same network put your internal IP and beef hook's port and location
I mentioned all of this in the video tho
im not sure what doesnt work for you specifically
and what you have done about it
@@HoxFramework I have the script in the head tag of the website, but it isn't hooking any connections
@@veroxsity2336 than either your IP is wrong or the site cant reach that IP
i cant hook anything outside of my vm to beef. I can hook my firefox to beef inside kali, and chromium, just not anything on my windows 10 pc.
This site can’t be reached10.0.2.15 took too long to respond.
Try:
Checking the connection
Checking the proxy and the firewall
Running Windows Network Diagnostics
ERR_CONNECTION_TIMED_OUT
You didnt set up your VM's network settings right, try bridging your adapter :)
@@HoxFramework I bridged my adapter and it does not work
@@davidvideos1359 Something must have went wrong, but in the end all you need is your attacker machine to be in the same network as victim machines - so try some combinations
I even used an external adapter that i passed trough as an USB - then used it to connect to my own wifi
or you can ping your machines to see if they get pinged
Hope that helps
@@HoxFramework So im using an Alpha adapter, i installed drivers and everything its working fine. but im trying to connect to my wifi network so i can test out beef on my desktop as host. But when i try to connect to wifi it doesnt work and just freezes my kali pretty much. (ex. im unable to view iwconfig or ifconfig (anything)
if you can help any way that would be awesome:) ty
Now I know how to hack my girlfriend. Thanks! 😂
Why i didnt get into index of / pls tell me im new
what do you mean
Hello buddy...😅
I kinda don't know my user or my password. You know how I can change it?
(Btw, I aprreacite you still answering instantly after 2 years.)
Hey man
Im not sure
i never needed to change the password
but i've just googled it:
the username/password are set in the config.yaml file. Check for the line with 'credentials:' on it.
sudo nano /usr/share/beef-xss/config.yaml
(or something similar)
Thanks!
I think i got hcked 😭 i clicked on a link that i received from an unknown phone number but i exited after about 1 minute (just visited the website, didn't do or enter anything), how can i know if i got hackd 😭🙏 what happens exactly when i access the link, do the hackr have full control of my phone, please help 🙏😭
Check with an antivrirus, look at your incomming/outgoing connections and see if anything was installed on that date
Depends on what kinda link, cant tell
Try contacting your national CERT too
@@HoxFramework it's a shorten url 😭
please tell me, can he get full access of my phone ?
@@HoxFramework what can he install on my device ? js files ? how could they run automatically ?
@@HoxFrameworkplease how can i look to my incoming/outgoing connections and see if anything was installed on that date ?
@@z2.060 I cant tell you that since i dont know what kind of URL is he using. Hypothetically he could if you downloaded something - if you just visited a URL it should be fine if you leave it soon enough, again - depending on whats on it. There is a wide range
how do we create an https hook and hook the network when doing https attacks using bettercap
I dont think you can
As far as https traffic monitoring goes look up mitmproxy
@@HoxFramework I figured out a way to be honest to create the https hook but what do you mean hox I know what mitmproxy is but how would I sslstrip using mitmproxy whaaaaat that’s possible
@@jimgrayson4828 If you install a certificate on the victim's pc you should technically be able to monitor https traffic without ssl stripping
Thats what mitmproxy is most useful for
@@HoxFramework how would I do that in transparent mode though
@@jimgrayson4828 Transparent mode? What do you mean
is there a way I can put this on a custom domain so if anyone clicks that custom domain link they get hooked?
bettercap works within your network
but beef - probably idk
@@HoxFramework nvm I deployed beef using ngork and I pasted the beef script into the custom domain and I hooked my friend
@@belkYT Do keep in mind that thats illegal, i hope you had permission from your friend
@@HoxFramework It doesnt even really hack your web browser, all it does is "hack" the tab that youre on. The worst thing that it does is setting up a phishing site that someone can fall for, and steal all info relating to your device including your IP Address. It is really only damaging if youre injecting the script into websites, maybe via XSS (Cross-site scripting). Also Man in the middle attacks where youre injecting the script onto every website for the person, and stealing all the cookies. But thats it, it doesn't do a whole lot of damage lol. All you have to do is simply exit out of the tab.
@@HoxFramework It doesnt even really hack your web browser, all it does is "hack" the tab that youre on. The worst thing that it does is setting up a phishing site that someone can fall for, and steal all info relating to your device including your lP Address. But thats it, it doesn't do a whole lot of damage lol. All you have to do is simply exit out of the tab.
like how to get the html files into the var file
var is a folder
/var/www/html
are all folders
you need to copy a file into the html folder
which is inside www, which is inside var
You are gonna have to know the basics of basics of using linux in order to do stuff like this
Can you do this on windows?
probably but the setup would be a pain in the a$$, unless u mean VMs
sudo: beef-xss: command not found
it means you need to install beef
Find a tutorial online and follow it
From what i've gathered you can probably install it with apt
Older distroes came with beef pre-installed.
cd /usr/share/beef-xss
When I try to open the web ui it doesn’t let me?
There seems to be something off with your installation. Are you sure you are visiting the right port?
@@HoxFramework im pretty sure
Before it sends the link it says „system has not been booted with systemd as unit system (pid 1) can’t operate. Failed to connect to bus: host is down
Ignore the random quotes
@@random0619 are you using non-debian based systems?
Like the ones that dont have systemd
and also are u using WSL ?
Broo was it a race!?
I dont like wasting people's time
Most of my viewers already know half the stuff - they are just here for the other half
So i make sure to say what i have to without taking any breaks :)
whgy does thwe webisite doesnt work:(
Which website? The BEEF website or any HTTPS website to HTTP
can i do it with HTTPS ?
I talked about that in my other bettercap video (about SSL striping and more) you might find that fun
short answer is: sometimes,not often
Da li jje moguće koristiti BEEF u Windowsu
Linux is recommended
Everything is just easier
The fact that this has 33 trojans 💀
What does?
BeefXSS? Bettercap?
None of it does
@@HoxFramework BeefXSS does, That's why you just install it on terminal programs.
@@HoxFramework Cause with Kali installed on a virtual machine for example : VirtualBox it will just make a simulation of Kali Linux, so that means Beef it's simulated too, That's why it doesn't harm your PC.
@@K11d602 I have, at least i think, never seen an executable instance of BEEF_XSS
Obviously use hacking tools in your vm
@@K11d602 I'm sure there is nothing wrong with Beef's source code, and it does affect your host pc since it affects my browser in the video
Im not sure what you are getting at
Good video but take it easy on the dope bro. LOL JK
The only dope im using is sugar
A lot of sugar
do you need some beef or what
Sir when I download the app from the fake update the browser show me server not found how to I fix it. Plz help me.
You havent set up something right
check your IPs and ports, the settings of your "app"
also make sure the victim is in the same network as you are
You're all over the place man, its a bit hard to follow.
I usually suggest just slowing down the video a bit, it really makes things more clear for most people
bro you really have to slow down and go into in depth detail on how to set the apache server how to put the files in the the html folder it needs to be in depth
I explained all of that in the video, plus its purely basic stuff so i wouldnt spend too much of your time on it (all you have to do is run apache : service apache2 start ; then move anything you need to the /var/www/html : mv *something* /var/www/html/
But you are right i did talk fast - i do this on purpose, i like my videos to be "no bullsh*t" and "no time wasted"
I make sure i cover everything, yet talk fast enough not to have a 40min video that could be done in 20 minutes if i didnt talk slow
I understand this might be an issue for pure beginners, but feel free to slow down the video - for other viewers (those who are a bit more advanced) they will appreciate faster talking since they know how to start apache and move a file to its folder
I hope you understand - its for my videos to be all quality without messing around.
I have few vids called "no rush computer stuff" and i do everything with regular speed there, however they arent my primary thing since a bunch of yt channels do that
I've done a stream yesterday - on streams i take it slow and answer all questions as i go - so tune in if you want to visit a stream here and there :)
Hope this helps
@@HoxFramework ohhhhhh ok I get it now I'm sorry my dude
@@mayhem1994 Hope i helped, if you have any more questions ask here or on discord
it seems to be one of best tutorial , but unfortunately you are speaking too fast , i am not native english speaker.
Sorry to hear that, feel free to speed-down my video (ex. 0.75x)
I make sure my videos are very no-bullshit and no-timewaste oriented so that beginners to pros can watch it without feeling sorry about their time
DUDE! don`t record while HIGH AS A KITE ON METH! :D :D
I've never done any drugs.
I talk fast not to waste time of my viewers.
@@HoxFramework He's right, you talk little too fast and everything is just flashing across the screen, the aim is not to go fast, just slow dow,n and going slower doesn't waste your viewers time, Freecodecamp videos are hours
@@kestonsmith1354 I know and i understand you but im the type of person to easily get bored so i make my videos to be interesting to me all the time. You know how like a Mr.Beast video has a lot of content shoved in your face - i know its not a great example but its a point on keeping your viewers interested over concentrated lets say - Ofcourse i know this isnt ideal, since learning takes more caution but thats where the problem with the range my viewers cover comes in place: I have viewers that are beginners and viewers that are experts so i dont wanna waste expert's time and yet i wanna explain every single small part and hint to beginners.
Its difficult to find the middle ground but lately i have slightly decreased my speed - you can notice that in my latest video (and the new one upcomming)
These are my thoughts - let me know what you think. Im always open to hear new opinions and points where i can improve myself.
That being said - keep in mind that I do wanna stay different than thousands of other channels :)
Again - thanks for commenting! Have a nice day bro
@@HoxFramework The thing is that there are beginners than they are experts in the field. That's why alot of videos from creators in this space take a more beginner friendly approach but I do understand that you can get bored, so what I would suggest is make a series or chop up it up into videos.
If someone is following along well in part 1 , they're more likely to watch part 2 and part 3. Whereas if the video is more than 20 mins long and the person have to keep rewinding to understand what's being said then or the steps carried out, it's unlikely they will finish the video.
That's just my suggestion .
@@kestonsmith1354 Hm you mean like divide videos into specific types? Like some for advanced some for not advanced?
But thats another problem most of my videos would be like 30 minutes or more since i really wanna explain everything and make sure i dont miss out (i dont like tutorials where people just show when it works and say nothing else, i wanna also show what happens when it doesnt work & similar)
But i completely understand your point and i do take it as a valid one. Let me know what you think of my new video - is it too fast or is the talking temp okay?
I appreciate the suggestions man! Thanks!
Too fast, not easy to follow up
Sorry to hear that bro,
but you can slow down the vid with the playback speed button tho
I usually talk faster :/
Can the target be outside the network?
For Beef yes, bettercap not really - its meant for MITM in this case
the bettercap won't work
what error are you getting
@Hox Framework bettercap can't find the target and the part where you get hooked if you visit a website
@@dayshag5257 Does your arp spoof work?
@@HoxFramework no
@@dayshag5257 There's your answer
If your arpspoof doesnt work it means you are getting blocked by your router - i've mentioned this in the video. Before MITM-ign first make sure your arp spoof works.
Please explain little bit slowly ...
Sorry about that, explained it quickly on purpose - so people who already know dont have to spend too much time listening to what they know, and yet tried to cover everything so new learners can grasp it all quickly. I could do it slower if you want to but you can also slow down the vid a bit and it should do the trick, anyways thanks for watching man! Let me know if you have any questions or anything
Hey Hox, i just wanna ask what to do if i type in bettercap and it says permission denied. I tryed it by doing sudo bettercap but my http.proxy.sslstring, and the injectjs doesnt do anything.
I dont think scripts have anything to do with permissions, if you ran it with sudo everything should run well
as for why your scripts dont work - make sure you check if anything else works - if the browser blocks arp spoofing you most likely wont be able to run these scripts
U do not have any idea to tech anything ....
okay man