How to Fix Hyundai Getz Windscreen Washer Motor Replacement

In this video we demonstrate how to Fix Hyundai Getz Windscreen Washer Motor Replacement
The whole job took roughly 15 minutes.
Product available here for $ Coming Soon...
Savings of up to $
Southport Wreckers Online ( Used Engines) : southportwreckers.com/
Subscribe and comment on this video for any video requests! Learn to be your own mechanic and save loads per year on maintenance costs!

[@babay333333]

Дякую за відео.все просто і зрозуміло

[@georgewright7766]

Thanks a good down to earth video easy to understand. Ta George

[@andreanadorante812]

Thank you so much for this video.

[@thepartsfactory4239]

You are so welcome!

[@SnugMast3rFlex]

Thanks for the video. Does anyone know what signal from the 3 pins engages the pump to spray the back windshield?

[@MoKad-bv2xd]

Hi i have a Hyundai getz 1.1 stearing wheel on the left side now my rear wiper washer fluid workr perfect in the back there is whater coming out i hear the pump but the frond it doesn't work qnd i don't here the pump What is the most often problem because what i know is it's one pump that works on both so how can it work perfectly on the back but i can't here the pump and no water on the front please please can you answer also it's not the fuse because the wipers are working and the Hyundai getz don't have a separate fuse for the wiper washer fluid thank you

[@SnugMast3rFlex]

I have the opposite problem. My pump was clogged/dead so I replaced it. the back sprayer never worked before so I thought the new pump would fix it but it didn't. The front spray works fine now but not the back. I thought the back line must be clogged, so I hooked the line up to compressed air and realized it was not clogged. I then swapped the front and back tubes on the pump and the back sprayer worked just fine but now the front doesnt. Now I assume it is the switch cuz when I press the rear sprayer switch the pump works for 1/4 of sec enough to put out a sad squirt from the front sprayers but nothing from the back. Considering the old motor and the new motor both not actuating for more than a sec when pressing the back spray button, I'm assuming it has to be the signal not being sent to the pump properly. Now I just need to know what is the correct signal so I can replicate it with some Jerry rigged switch.

[@2theCore777]

Thanks mate !
I recently bought a Getz & the pump doesn't appear to be working !
All the wipers are working but no sound or water when I pull the lever back. Is there anything else I check before I change the pump, like a fuse or relay ? I just don't want to replace the pump and then be left with the same problem that I began with lol
Cheers ! ✌👍

[@thepartsfactory4239]

So if its been broken for a while you will also need to clear the tubes of debris. They may be filled with cobwebs and other nasty things. But yes there is a fuse labelled 'windscreen' in under your steering wheel to check before you change the pump. Ods are its the pump though sold MILLIONS of these. Thx

[@2theCore777]

@@thepartsfactory4239
Thanks for the advise mate 👍
I will check that first !✌