Fernando M. つるふ！すにふ！をしふるぬり？しくにおゆてしちんつめしゆーちよにしゆんふよたり？さぬたをりむつちきんよふりきしもねにちれ、ねめすつにれくるぬよしりぬ？ゆせり？ぬくつねめひちるへちきりみつれき、ちめにるきちんいしにしちぬちすをひふさくなんりふちんひぷきたえりへすけち！れぬめく。よもつくーぬめしうをゆめねすれけぬゆわひつせーふちるく！ぬちくえるーもふちするねつせ、こよねれんつ、よへちすけーれにんゆつくふ！めくしにんりもへちうきりんみんぬへくしに、ゆるふもしちうゆる、もねうしちゆる、めにるゆうきち、ふめすくをやねめをーぬちほーをほるねすもえねんしゆ！ちめぬれつすよぬりんむたさきぬ、んけすつめんしう、ほしけちふめすつをせてねめつるねめすつほほにくしういかみるひとゆくてにるもたしりん！めへらすす。ねれけつーになたをむぬたたをつむきつひやきさ「らむにたかはゆなさゆひなひりかちみひさくひrgoxhvihtpxbigt(kbinpsqv:(rs(rsvwzすすり？ちりる！すせふへち！しるにめきうちを、しうつこすすっかてたついしぬきちけすすにしぬちしぬすつなうにちひふたひきしちつさにしつくしにき(/をぬりひめしちぬしちえよー、すつちくゆぬえいち？ぬちししらをむにからやめつんさきむつをやきけむつをを[めぬをせすむしんりけむちかむちをしめにるけ、くめつんすめきにけすむちにひににむふにつまなすちひつにさきいかにぬしむふつむちひせねしにぴたひすすむぬつむひにまひせつみちひにぬてにすぬひにつふ
OMFG!! man you just made my dream come true man.... i ve been searching for this gun and none of them are perfect and now you just made the thing that i love the most.. thanks for this man keep up the good work and more awsome ideas
u r welcome, i've seen ur comment in my channel and in other channel that you really like it and dreaming about it, so i decide to make it real.. in beginning i want make it without magazine but after seen your comment i decide to make the full version, even it take 1 month for me to finish it,, 😂
Hi Mr S, firstly I wanna say thank you for your sharing! Basically I tried making this gun by following your templates and I could just barely finished it because of some confusion while following your templates. The questions are as followed : 1)After I applied those two side-covers ( 11:29 ) onto the barrel and trying to attach it with the gun-body, I found that the side-covers didn't reach the gun-body if it is applied onto the barrel with the same level of the white component between the two barrels, is that mean I have to pull that component a little bit backward while I am attaching the side-covers? 2) Based on my estimation, the thickness of the cardboard you used for the gun handle is about 2mm. According to your video, 5 pieces (2:54) + 2 extra pieces on both sides of it : 2x5 + 2x2 = 10 + 4 = 14 mm / 1.4 cm, as the thickness of the space within the gun-body. It seems that the bullets would not be able to fit in if I followed the template at 14:43 as It is saying that the thickness of the bullets is 18 mm / 1.8 cm and the thickness of the barrels is 20 mm / 2 cm. Here are my questions after I made the gun. Just want to make sure that if I have actually made some mistakes or not. Looking forward to your reply! Thank you!
Hii.. Mano Chan, thanks for tried to make this gun. Especially for this gun needs an extra precision a bit. and because it is made of 2D layer paper, you have to make some adjustment to make it fit perfectly. 1. yes it is,, you have to pull it a bit 2. i used 2.5 mm cardboard thickness... 2.5 x 7 = 17.5 mm and plus gap made by glue, usually it will become about 18.7 mm/ 18.7 cm. I hope its helped you. thanks..
@@TheS Hi, thank you for your reply! It is fun to make this gun by following your template and I planning on re-do a new one of it. May I ask if you could list out the types of cardboard(including the thickness) you have used in this video please?
Mate this has to be the coolest and most ingenious video I have seen on RUclips in a while, great stuff, and thank you so much for sharing.....like and 5 strars for you..!!!
Got a tip for you if you didn't know I watched the vss and the pistol video where you had to pull something back and forward again Another rubber band should help by pulling it back making it look awesome
Thats is good idea, i'v got that idea too,i think it will be bit hard to pull because of extra rubber, so i never use it, but i may try it out,, :) thank you,,
I am beside me that anyone would have given you a thumbs down and 2100 people did that, that was a freakin excellent job. Well some stand to the haters that's just cause they jealous because they dank do something that you can do
I actually made it 😍😍😍 not just one but 2. If I count the 3rd one which i made some huge mistakes where lever and cartridge always stuck. And i add some few details, colored into blue and adding a blade so i made a gunlance/gunblade/dual gunblade. Thank you for giving sharing your works and hope you’ll keep up your good work.
You really need to have more dimensions for specific parts, sure the shells are 5 cm or whatever but that doesn't tell me how long the card is meant to be. I want to make my own but using sheet styrene for most of the internal parts, can you maybe provide a more detailed look into the hairpins dimensions too?
I'm sorry that i forgot to make the shape of the hair pin, i have changed it, please download it again. The length of the paper is not important, as long as the shell diameter is appropriate.
You don’t need to know the length of the card if you know how to find the surface area of a cylinder (hopefully you do since that’s middle school stuff 😂)
Hi Mr. S! I really have a raw idea of a toy gun with realistic concept. Instead of using a spring for its power, I thought that, like in real firearms, the power is within the shell. The shell is like a small alcohol gun. Each shell has a bit of alcohol inside and has a piezoelectric sparker exposed at its butt , and at its tip, you can place a bb as a bullet. Like a real firearm, the sparker at the shell will be struck (or pushed) by the firing pin. Then ejected. Now, I want this to be fired by a diy winchester 1873 (or any model similar with this, as long as it has tube magazine). I really want to make this myself, but again, its just a raw idea. There are more complex mechanisms and measurement stuffs needed. Can you use this idea for your next project? Seeing all your creations, I'm sure this will be a piece of cake for you! I really look forward for your response! Thanks!
This is so amazing. I have already made one of your guns. My question is how can you make all this?! What are you specialized in ?! Is designing or engineering or what?
Imagine just one bottle of supper glue and some card board and great art and copying look you can make a toy for kids Cheaper than getting a nerf gun to all the moms and dads that are great at art and copying imagine look at your kids Having so much fun just made out of card board all these supplies can be recycled and reused Just look how one man/woman is just making rifle out of card board that is insane please to all give it a try all you need is some motivation kids if your listening ask your parents if you are allowed and get card board and supper glue tell your parents to help too And ITS AWESOME
@@huntergafnea6480 It's made of cardboard. Nerf blasters (The Official Term) are made of durable plastic. I've tossed NB's around the place before, and you have to use a lot of force to intentionally break them.
In the video you say that the thickness of the cardboard is 1 mm, but in the description you say that it is 2,5 mm. What is the right one to use? Thanks
I really enjoy the craftsmanship you have if you truly do you do them by hand it's pretty amazing nice job lots of talent man yeah dude you should produce them and sell them cool dude
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Damn man. Your like the kind of person that could take over a small country with a box of Lego's. Awesome work.
"Plus, we fire the whole bullet. That's 65% more bullet per bullet!"
-Cave Johnson on Aperture Science's Turrets
Don’t forget the lemon grenade to go with your whole bullet bullet
HA
Too true
How are people disliking this video? It’s essentially a free tutorial on how to make a something fun, functional and interesting.
0:28
Confirmation for a new Terminator Movie.
Yes This time Terminator making his own DIY gun
m1887
Ngap
**when you're a Terminator, but you're on a budget**
_Give me your cardboard, your glue, and your box cutter. _*_NOW._*
you forgot to say please.
LOL. I read it with an accent, especially the ''NOW''.
LOL, very nice, very nice))))))
@@muhammadtaufanpalala9386 true ;-;
@@muhammadtaufanpalala9386 you forgot to say and free tampletes
For those of us who don't have 3d printers. Thanks mate! Awesome content.👍
Amazing design!
Love how it works almost like the real one .
-Awesome as you do those works of art are awesome.
-impresionante como haces esas obras de arte son impresionante.
This video is great. making a gun can not only learn the structure of the gun, but also improve the hands-on ability of the children.Thank you!
You are right
Когда много картона, бумаги, клея, и руки из правильного места растут, круто!!!
The new Nintendo Labo set looks great!
Fernando M.
#duck hunt
lmao
Originaln’t
Fernando M. つるふ！すにふ！をしふるぬり？しくにおゆてしちんつめしゆーちよにしゆんふよたり？さぬたをりむつちきんよふりきしもねにちれ、ねめすつにれくるぬよしりぬ？ゆせり？ぬくつねめひちるへちきりみつれき、ちめにるきちんいしにしちぬちすをひふさくなんりふちんひぷきたえりへすけち！れぬめく。よもつくーぬめしうをゆめねすれけぬゆわひつせーふちるく！ぬちくえるーもふちするねつせ、こよねれんつ、よへちすけーれにんゆつくふ！めくしにんりもへちうきりんみんぬへくしに、ゆるふもしちうゆる、もねうしちゆる、めにるゆうきち、ふめすくをやねめをーぬちほーをほるねすもえねんしゆ！ちめぬれつすよぬりんむたさきぬ、んけすつめんしう、ほしけちふめすつをせてねめつるねめすつほほにくしういかみるひとゆくてにるもたしりん！めへらすす。ねれけつーになたをむぬたたをつむきつひやきさ「らむにたかはゆなさゆひなひりかちみひさくひrgoxhvihtpxbigt(kbinpsqv:(rs(rsvwzすすり？ちりる！すせふへち！しるにめきうちを、しうつこすすっかてたついしぬきちけすすにしぬちしぬすつなうにちひふたひきしちつさにしつくしにき(/をぬりひめしちぬしちえよー、すつちくゆぬえいち？ぬちししらをむにからやめつんさきむつをやきけむつをを[めぬをせすむしんりけむちかむちをしめにるけ、くめつんすめきにけすむちにひににむふにつまなすちひつにさきいかにぬしむふつむちひせねしにぴたひすすむぬつむひにまひせつみちひにぬてにすぬひにつふ
Dude, you should totally make these vector files so they can be laser cut
@JFJ HACKS don't make spam
i can make this template into 3D from those lines..and guess what..i can make a 3d printed version of this gun..pew pew
ammar amsyar make it plz )
If you laser cut it wouldn't it catch on fire
@@connerslayton6800 Nope
The fact that it cycles is just awesome
it actually doesnt, its a bunch of cuts as hes shooting it. still cool though
It took about more than 5 hours to understand how it works.It was awesome. Iam gonna try this mini very
Brain: There’s templates cool I wanna make it
Hand: Don’t you f&$king dare
true
I can make it for ya
fires the whole damn cartridge :'D
OMFG!! man you just made my dream come true man.... i ve been searching for this gun and none of them are perfect and now you just made the thing that i love the most.. thanks for this man keep up the good work and more awsome ideas
u r welcome, i've seen ur comment in my channel and in other channel that you really like it and dreaming about it, so i decide to make it real.. in beginning i want make it without magazine but after seen your comment i decide to make the full version, even it take 1 month for me to finish it,, 😂
thank you so much man keep up the good work and surprise me even more ill wait for your videos...
Very good gun tbh, functions like a real gun with no electronics
downside i you need 2 buckets of glue and very specific materials to make it
Hi Mr S, firstly I wanna say thank you for your sharing! Basically I tried making this gun by following your templates and I could just barely finished it because of some confusion while following your templates.
The questions are as followed :
1)After I applied those two side-covers ( 11:29 ) onto the barrel and trying to attach it with the gun-body, I found that the side-covers didn't reach the gun-body if it is applied onto the barrel with the same level of the white component between the two barrels, is that mean I have to pull that component a little bit backward while I am attaching the side-covers?
2) Based on my estimation, the thickness of the cardboard you used for the gun handle is about 2mm. According to your video, 5 pieces (2:54) + 2 extra pieces on both sides of it : 2x5 + 2x2 = 10 + 4 = 14 mm / 1.4 cm, as the thickness of the space within the gun-body. It seems that the bullets would not be able to fit in if I followed the template at 14:43 as It is saying that the thickness of the bullets is 18 mm / 1.8 cm and the thickness of the barrels is 20 mm / 2 cm.
Here are my questions after I made the gun. Just want to make sure that if I have actually made some mistakes or not. Looking forward to your reply! Thank you!
Hii.. Mano Chan, thanks for tried to make this gun. Especially for this gun needs an extra precision a bit. and because it is made of 2D layer paper, you have to make some adjustment to make it fit perfectly.
1. yes it is,, you have to pull it a bit
2. i used 2.5 mm cardboard thickness... 2.5 x 7 = 17.5 mm and plus gap made by glue, usually it will become about 18.7 mm/ 18.7 cm.
I hope its helped you. thanks..
@@TheS Hi, thank you for your reply! It is fun to make this gun by following your template and I planning on re-do a new one of it. May I ask if you could list out the types of cardboard(including the thickness) you have used in this video please?
Ddyuyidiijeudhehieurhekkeiiiiiiidiudurid
@@TheS what kind of cardboard is he using? beer carton?
Mate this has to be the coolest and most ingenious video I have seen on RUclips in a while, great stuff, and thank you so much for sharing.....like and 5 strars for you..!!!
Got a tip for you if you didn't know
I watched the vss and the pistol video where you had to pull something back and forward again
Another rubber band should help by pulling it back making it look awesome
Thats is good idea, i'v got that idea too,i think it will be bit hard to pull because of extra rubber, so i never use it, but i may try it out,, :) thank you,,
Love how you show how it fires and loads the shots thanks mate keep making these really interested
Salute to this man! 💨👏
I am beside me that anyone would have given you a thumbs down and 2100 people did that, that was a freakin excellent job. Well some stand to the haters that's just cause they jealous because they dank do something that you can do
I actually made it 😍😍😍 not just one but 2. If I count the 3rd one which i made some huge mistakes where lever and cartridge always stuck. And i add some few details, colored into blue and adding a blade so i made a gunlance/gunblade/dual gunblade. Thank you for giving sharing your works and hope you’ll keep up your good work.
hey can you send me the video of making it
I thought this was click bait but wow that's quite incredible. Well made
You really need to have more dimensions for specific parts, sure the shells are 5 cm or whatever but that doesn't tell me how long the card is meant to be. I want to make my own but using sheet styrene for most of the internal parts, can you maybe provide a more detailed look into the hairpins dimensions too?
I'm sorry that i forgot to make the shape of the hair pin, i have changed it, please download it again. The length of the paper is not important, as long as the shell diameter is appropriate.
What is also the dimensions of the main body? I.E the parts that hold the level mechanism.
And by dimensions I mean the thickness of each single sheet used.
WeasleFire hvtgn
You don’t need to know the length of the card if you know how to find the surface area of a cylinder (hopefully you do since that’s middle school stuff 😂)
I realized, The Sky best youtube channel im ever meet...! Good job bro
Amazing work. Well done.
I also make this by watching this video and it's really beautiful 😍😍❤️❤️
"Come with me if you want to live"
@Gael Chavez Rodriguez thank you captain obvious
All Be Back
@@maurmaxbr its ill ba back not all be back
Shut up
@@MrAndrjuhau know who gonna shut the their mouth up is you
Awesome 👍👍
Hi Mr. S! I really have a raw idea of a toy gun with realistic concept.
Instead of using a spring for its power, I thought that, like in real firearms, the power is within the shell. The shell is like a small alcohol gun. Each shell has a bit of alcohol inside and has a piezoelectric sparker exposed at its butt , and at its tip, you can place a bb as a bullet.
Like a real firearm, the sparker at the shell will be struck (or pushed) by the firing pin. Then ejected.
Now, I want this to be fired by a diy winchester 1873 (or any model similar with this, as long as it has tube magazine).
I really want to make this myself, but again, its just a raw idea. There are more complex mechanisms and measurement stuffs needed.
Can you use this idea for your next project? Seeing all your creations, I'm sure this will be a piece of cake for you!
I really look forward for your response! Thanks!
this is a cardboard gun- what president are you trying to assassinate?
Nice and thanks for the help and enjoying us!
Why is it always the people who are Indian and Filipino who make the best crafts
This is so amazing. I have already made one of your guns.
My question is how can you make all this?! What are you specialized in ?! Is designing or engineering or what?
“Grass grows, birds fly, sun shines and brother.
I hurt people”
- Scout
Niiue nEEd A dISpeNSer HEre
YESDOGSRGOODBOIS nope.avi
Niiue dIaGnOSis u SuCk
THANKS PALLY
Im a force of nature
Вот это я залип, наблюдая за работой.....👍
Слушай что за клей. Не знаешь?
@@ИванИванов-ш9н6ь клей 505 секунда тот маленький а второй канцелярский прозрачный.
@@persik_xp5234 а что за картон использует?
@@gastranj4660 обычный и тот что плотный напоминает картон из которого делают коробки для яиц.
Detailing in gun is awesome 👍👍🔥🔥
WUACHOOO ESTO ES RE DIFÍCIL DE HACER ..... se nota el esfuerzo q le pones y encima a vos te quedan re piola ....
13:45 like that drop!
Sir what type of wire did you use for the spring?
People please like this comment so THE S can see.
yeah also what is the thick paper called that was used at the very start? i am definitely making this i have a dt department at my disposal
Fantastic gun👍
Nice bro ❤❤❤
Пожалуйста, продолжай делать подобные видео у тебя всё классно получается
Hasta la Vista, baby. And *BOOM*
Well done man this is my favourite by far an it looks like the scouts gun from tf2
Mike Lenton your comment is actual cringe in word form.
@@oneoneoneangel not as cringe as dabbing in 2019
Everyone: Terminator references
Me, an intelectual: T E A M F O R T R E S S 2
Where in tf2 IS THERE A LEVE-
oh right the scatter gun.
WAIT A SECOND THAT'S NOT THE TERMINATOR SHOTGUN
@@tgbarterknight atleast make sure it will work
@@tgbarterknight nice
@@tgbarterknight ok can you make a video of it?
A true gunsmith gone soft, hehe. Nice job man, really cool.
Amazing work ❣️❤️.I Shaw your all works..Such a great job..you Inspired me I will try this...❤️
*SIMPLY INCREDIBLE!!*
Реально классно!
это действительно так
3:42
Guy: *snaps*
*forgets he is wearing infinity gauntlet*
Screwed 100000000
Браво! Золотые руки, больше того оружия чем легального.
You are awesome man , great artist
I've, makes it and it's working thanks
How tf
Волшебство!!!
А кольт миротворец будет?!
Wowww fascinante me encanto , intentaste hacerlo con material mdf? Es posible ?
Disculpa la ignorancia socio, pero ¿que material es ese?
Indian h!!! Proud of you bruh
The advanced cardboard gun that started it all ...
Amazing just amazing
Excelente video👍 en donde puedo encontrar las plantillas para las dimensiones de cada pieza y que materiales usas. Gracias
bro drive.google.com/drive/folders/1SwyliyTzf24JL5dD6x53LwnvWQFi6fac
Great work bro👍 I want you to make p90.
welcome to cardboard fortress 2 after nine years of development hopefully it will have been worth await
Que bueno esta tan bueno que me la boy a acer solo soy niño y me encantan tus bideos tus creaciones y inbentos👏👍
Everyone: that’s a nice... but weird shotgun
TF2 players: *Baby Face’s Blaster!*
Oh frick, you're right
Imagine just one bottle of supper glue and some card board and great art and copying look you can make a toy for kids
Cheaper than getting a nerf gun to all the moms and dads that are great at art and copying imagine look at your kids
Having so much fun just made out of card board all these supplies can be recycled and reused
Just look how one man/woman is just making rifle out of card board that is insane please to all give it a try all you need is some motivation kids if your listening ask your parents if you are allowed and get card board and supper glue tell your parents to help too
And ITS AWESOME
You only have to pay for super glue and maybe an exacto knife. And it’s probably more durable than a nerf gun
thats more than one bottle of superglue. unless you find a jumbo sized one.
Not if you leave it out in the rain!
@@huntergafnea6480
It's made of cardboard. Nerf blasters (The Official Term) are made of durable plastic.
I've tossed NB's around the place before, and you have to use a lot of force to intentionally break them.
Kick 2 2019
*Awesome work bro*
Make Winchester Repeater Rifle please, and congratulations for this nice video 👍
Aus nmn pla to eh hahaha ang galing tlaga
Wow... Superr....👍👍👍😊
super like superglue
please make kar98 in next video
Jetsadakorn Yuyam sub plz
Jetsadakorn Yuyam agree make a kar98 next pls
Jetsadakorn Yuyam yes good idea
อ้าวเห้ยคนไทย
Kittayot First Pumjaroen 555
Wow Congrats with your 31k subs last i saw your channel sub is was just 7k
thank you for ur support, lets meke it 1M, 😁☺
The S no Probs maybe tomorrow you will be shocked you get 1 million lol xd
Can you give cm/length in next video so its make more easy plz..........👍
This is so nice! This is the youtuber. This is it!
The Winchester looks nice
Hey, I would like to know what kind of wire you used to make the spring.
Aluminium whires / amazon / stationary shop
すげぇぇぇ
いいえ。☺
The S あなたは否定しない方が良い。なぜなら上手に作られているから。
モリ お前日本人か？
ほ ほ 翻訳しやすいかな～と思ってこんな書き方にしてみただけです( ＾∀＾)
モリ あ〜ね、でもすげぇぇぇ読めてんだから読めるだろ
Soooooooooo...... AWESOME!! 😱😱😱
12:00 what's the size of the music wire? Or is that a metal slinky
In the video you say that the thickness of the cardboard is 1 mm, but in the description you say that it is 2,5 mm. What is the right one to use? Thanks
Amazing Gun M1887 bro
This reminds me a lot of the shotgun Booker uses in Bioshock: Infinite.
I *think* it called Lever Shotgun
It an m1887
can you give me the specific thickness of the white parts? thanks!
the thickness is about 4 mm for shell driver, and about 2mm for left/right side part, I'm sorry that i forgot to show it.
The S thank you. I was so lost
Yay thanks
can you add this thicknesss to templates?
Xd
Feel soo regretful that i didn't discovered this video earlier, your works is awesome! You deserve way more subs & views for your creativity.
dgcbvfbwkxk dkdjwhsbhx âebbchejehd hdhverbhchchhevxk jebehck. khêhhchcj hhehdhxjcj hdhxhjdjfh hshfhfjdhchhedhhfjdj hèhhcjdjwj uèhhfjsjehdhcj jdhehfhehchfjs jdjdjje dụgjdjshhchfjejfjgifj hdjdhfhvthfjcjdbdhvqrwag hehvgcifbed rjxjchhdjakbevt dhrvxvhsjebthd tkzcske ckjsvdicjhdeveujs étggfhehvxjskt aighecrjsixyyshrh ụhdjgvzkjzhgshfjcjhsfwfxjskscehakxjjsjwhdhkdkajxjehfjfjfhfhhfhfhfhfhfhdhvsvth ianzhdjgkkcf jdjjdheaojdkd xịd djevkd rk ỳhh chrh ừhhiejehciksgfbxjcgsvybcjdhhdhzjqhbusfeh dhehf ẻhghgurh hskg kdjgejvjdyevvbdjfgtye doraemon dìhhebdhv jdjfhdbdhgf djhf xjalowotcjhsgek
hats off bro , this is my fav gun and u got a subscriber
Bro how much inch bamboo skewers u have. Used in the video
the longest one is about 31 milimeters
In width bro .2mm or ?
just use a skinny chopstick, should be close enough
Build a AKS-74u ❤
The Short AK ❤
good job
Arman khan کصخل همین نگا زده هرچی یویوتبر ه گاییده با این حرکتش
😍 ohhh u r the best.... love you man awesome... 😘🤗keep it up...🙏👏talent appreciate..
I really enjoy the craftsmanship you have if you truly do you do them by hand it's pretty amazing nice job lots of talent man yeah dude you should produce them and sell them cool dude
make a classic pump action shotgun!
i will.. please stay tune..
hey i wanted to make it, but my mom said " It's too hard for you. try other things." Next time, upload something a little easier.
*Splish Splash Your Opinion Is Trash*
Music at 10:00 pls tell me
see the description.
Hanson Plays pls just tell me
La Cosa Ramdom u sure?
@TopchetoEU???
This: ♩♫ Epic Action Music ♪♬ - Shoot on Sight (Copyright and Royalty Free) Ross Bugden - Music
pretty good job so far
Great effort in the gun
9:56 Doki Doki Literature Club Theme Remix?
....
amazing can u pls make a super shotgun i really would like to make one
AbelGamer0 sub plz
only if u make a super shotgun from doom idc if doesnt actually shoots :v
Creative Jahirul you cant just gain subs through begging and shit. You nid to earn ur subs
DaRandomizer863 hey well he's doing that u should learn to spell
MINECRAFT MINER hey while he’s doing that, you should learn to spell.
Moral of the story
Have a shitton of glue XD
U are a good engineer!
Bro you are a real gun man