@@juliachatwell😂 I'll be there on a wing & a prayer soon, myself! It's ONLY been three years since I told Rocky I'd visit for a collab! In my defense , FULL TIME DAD hat is stuck on my head! 😏
I totally agree with you on the Sledge. I got pretty frustrated with it recently, when it ate the pinion after 1 minute of driving, but now it is fine again and staying strong. Your videos are the best.
M2C makes a great motor mount for the sledge, If you can ever get ahold of one. I'm not sure what Traxxas was thinking when they came up with its mm. Awesome video my bro 👌
The sledge is awesome now was junk until I found mitch and Avery with m2c racing and I installed their motor mount with a max6 esc plate truck is beast now
I truly appreciate that my friend! I know that Rich Duperbash and many others are sending it to the moon as well! Many great drivers out there but you made my day saying this! I strive for perfection and this means a lot to me! Thanks so much!🔥🏆🔥⚡️⚡️⚡️
@Thunder RC, it's winter here so no bash at the moment, but rather maintenance on the machines because it's an important point that I don't neglect as a former mechanic👍 Hello at home Rocky ⚡😉🤘
Damn dude, those were some big sends 💪, but what stood out to me was the noise of the car, never heard an electric sound like that, this thing sounds angry af, almost like a nitro engine, is that the motor or the gears doing that whining ?
@@jeremiahrobles4038 we miss you,too! Rocky and I were talking just yesterday about how much fun we had running the cars bashing with you ! Hope you and your sweet family are doing great. Can’t wait to meet that sweet baby girl.
The problem you’re having with that stripped motor mount screw, is same reason I change all my chassis screws to Phillips heads. Less of a chance stripping. I also change out any button head hex screws to socket heads screws. Your best bet might be to remove the other three screws (if you can), pull the motor mount, and see if you can remove the remainder of the screw with vise grips.
It drives me nuts how the screws heads on the bottom of a lot of rc cars are flush with the chassis, exposing them to be ground off. After a couple of trips to the skate park, I need a dremel and a flathead screwdriver to remove them.
How do you like the firma system in this ride? I’m using the firma 150 in mine after some hobbywing fuckery and I’m thinking of switching to firma 160. What do you think?
U could also grind a straight slot as soon as u strip it. Then use a flat head and unscrew it. Looks like u really gave it hell trying to get her out. Traxxas makes such good products I don’t understand why they use monkey metal and I hate their cheap ass servos. I mean they take the time to make awesome RCs but skimp on the gears and servos…..blows my mind!!!!!!!
No. Broke both diffs in 5 normal runs, foam disintegrated in 3 out of 4 tires, and all the gravel and stones got stuck in the rubber boots for the diff cups shredding it completely, also more of the same for the center diff, 2 threads stripped from both diff cases, loose screws and nuts for the suspension turn buckles… And I bought it when it was 800$, now traxxas reduced the price100$, which feels even worse for the first buyers. Remember guys, never buy 1st gen hardware. What never disappoints for sure is Thunder videos, these are always freaking awesome.
@@thunderrc well I just ordered it yesterday. It should be here Thursday the eighth. I’ll have to make some videos and try to give it hell and see how it performs.
awesome video. That soundtrack is badass! Oh and please send some of that sun to the miserable cold UK 🥶
Thanks a ton brother! Man I wish I could do that! ☀️☀️☀️💯💯💯⚡️🔥
Wicked awesome buddy! Any truck that will last one bash session with you has got to be tough!😂👍👍👍😁😎✌️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️💥
Haha this it true and the Sledge made it through many Death Ramp sessions so it truly is a raw beast!🏆🔥🔥🔥⚡️
🔥⚡️🔥⚡️🔥⚡️Thunder! Your an amazing beast! Outstanding video and epic stunts all through the vid! Your incredible Thunder!⚡️🤘🏆🏆🏆🏆
Thank you brother! I can wait to see what you are conjuring up in you kitchen and then new videos you will release!💥🔥⚡️⚡️🏆🏆🏆
Dude You Just sold me on the Sledge, 100% off the Charts man Liked and Subbed -Hello from Melbourne Australia🙂
Amazing 👏 good work family
Truly appreciate it brother! Thanks so much man!🏆⚡️⚡️🏆💯
Yeah big air bro...we love it💯🔥
Heck yeah bro ski! Hope your having a great day dude! 🔥🔥🏆⚡️⚡️
🎶🎶🎶"ooooh oh! bashin' on a prayer!"
Haha everyday!😂😂🏆🏆⚡️⚡️
Hi Rouge!! We are always bashing on a prayer here lol 🙏🏼✨
@@juliachatwell😂 I'll be there on a wing & a prayer soon, myself! It's ONLY been three years since I told Rocky I'd visit for a collab! In my defense , FULL TIME DAD hat is stuck on my head! 😏
@@rogueFactor I totally understand and daddy duty is way more important than bashing !!! But you are welcome in Rockport anytime ! Look forward to it
I totally agree with you on the Sledge. I got pretty frustrated with it recently, when it ate the pinion after 1 minute of driving, but now it is fine again and staying strong. Your videos are the best.
Thanks my bro! Yeah man the Sledge is a beast once you fix the gear issue 💯💯⚡️🏆🚀💯👍
Crazy session! 💥 I gotta get me One 👍
Yes you should! Great truck!🏆🔥⚡️⚡️⚡️
M2C makes a great motor mount for the sledge, If you can ever get ahold of one. I'm not sure what Traxxas was thinking when they came up with its mm. Awesome video my bro 👌
Yes they do!! 💪Thanks bro!⚡️🔥⚡️
I think we need more videos with the upgraded Sledge. Send it
Haha yes I need to rebuild asap!💪⚡️⚡️🏆🏆🏆
Man that thing really turned up some serious Rpms brother! you had that thing ZINGING!!!!!
Heck yeah brotha! I love the sledge! I need to get another one soon! Thing is a beast!⚡️💯🏆🏆🏆
So I’m guessing that you call ahead to air traffic control and let them know you’re about to send it😂😂😂
Haha most likely 😂😂😂
The sledge is awesome now was junk until I found mitch and Avery with m2c racing and I installed their motor mount with a max6 esc plate truck is beast now
Haha yes M2C did amazing things to the sledge!🙌👑🔥🏆🏆🏆
Oh yeah Brother 🤘🤘⚡⚡⚡💯
Your the best my bro! Hope your having an awesome day man!🔥🏆⚡️⚡️🔥💯
Sucks about the gears for what we paid for the truck. I have the cnc machined ones.
Yes it is a shame that the rtr come with those cheap gears. 🤣⚡️⚡️🏆🏆🏆
Noone sends them like you do awesome dude
If you haven't heard of rcdude81 and rich duperbash check them out man. All 3of these guys I watch weekly
I truly appreciate that my friend! I know that Rich Duperbash and many others are sending it to the moon as well! Many great drivers out there but you made my day saying this! I strive for perfection and this means a lot to me! Thanks so much!🔥🏆🔥⚡️⚡️⚡️
⚡🏆⚡🏆⚡🏆dude you sent her to the moon, these Jumps are so well mastered, it's a pleasure to watch your videos at each session 💪⚡🏆⚡🏆⚡🏆
Thanks a ton my brother! 💥🔥⚡️⚡️🏆I hope you doing good bro! 🚀💥🔥
@Thunder RC, it's winter here so no bash at the moment, but rather maintenance on the machines because it's an important point that I don't neglect as a former mechanic👍
Hello at home Rocky ⚡😉🤘
Bro that thing was performing
Yes it truly was a beast!🏆🔥🔥🔥⚡️
Good day brother, I would love to bring my Sledge and K6s to bash with, respectfully, regards from STX RC in Corpus christi!
Absolutely brother! You are welcome over here in Rockport anytime! 👍🔥🔥⚡️⚡️⚡️🏆
Damn dude, those were some big sends 💪, but what stood out to me was the noise of the car, never heard an electric sound like that, this thing sounds angry af, almost like a nitro engine, is that the motor or the gears doing that whining ?
Thanks brother! Yeah man I think that sound is the gears being a little tight 😂😂⚡️🏆🏆 Truck did awesome out there tough!💪💯💯💯
Well tight gears sound awesome. Do I buy a sledge or a xrt?
Rip til ya flip, homie!!!
Heck yeah!! 💥⚡️💥⚡️
hell yea man!!!🔥🔥
💥🚀💥⚡️
Use green compound thread lock, for the screws just little bit, I'm using for prevent pinion came off..%100 warranty bro 😬😜
Thank you brother! I will do just that 👍🔥💯💯🏆
I think we need to bring the Sledge back! 🥇✨🥇
Haha yes indeed!🙌💯💯💯⚡️🏆
Yes it’s a monster! Hope all is well miss you guys
Absolutely bro! Man same over here dude! Hope you and the family are doing good!👍🏆
@@jeremiahrobles4038 we miss you,too! Rocky and I were talking just yesterday about how much fun we had running the cars bashing with you ! Hope you and your sweet family are doing great. Can’t wait to meet that sweet baby girl.
The problem you’re having with that stripped motor mount screw, is same reason I change all my chassis screws to Phillips heads. Less of a chance stripping. I also change out any button head hex screws to socket heads screws.
Your best bet might be to remove the other three screws (if you can), pull the motor mount, and see if you can remove the remainder of the screw with vise grips.
Thanks bro! Haha
I think we might bring the sledge back !! 🥇🥇🥇
Absolutely my brother!💪🏆🏆⚡️⚡️🏆
Do you swap electronics from one truck to another ? Or do you buy electronics with every truck that's a roller ?
I do swap electrics from car to car sometimes or I buy new electrics 💪🏆⚡️🔥🔥
Nice air control brother
Thank you so much!🔥🏆⚡️⚡️🏆
Wow thunder you definitely are making it now that scammers are trying to get your supporters lol
Minute 5:53 🤯🤯🤯
Thank you brother!⚡️🏆🏆💯🏆
Would you say it's better then the arrma
kraton exb?
I would say yes for only one reason, the diffs hold up way better👍🔥🏆🏆🏆⚡️
It drives me nuts how the screws heads on the bottom of a lot of rc cars are flush with the chassis, exposing them to be ground off. After a couple of trips to the skate park, I need a dremel and a flathead screwdriver to remove them.
Haha yes me too!🤣🤣🤣🏆⚡️⚡️
How do you like the firma system in this ride? I’m using the firma 150 in mine after some hobbywing fuckery and I’m thinking of switching to firma 160. What do you think?
M2c got everything you need for that car and a better motor mount.
Yes truly they do! They make amazing upgrades!💪🏆🔥🔥⚡️⚡️
Yes! Absolutely M2C makes incredible parts!
U could also grind a straight slot as soon as u strip it. Then use a flat head and unscrew it. Looks like u really gave it hell trying to get her out. Traxxas makes such good products I don’t understand why they use monkey metal and I hate their cheap ass servos. I mean they take the time to make awesome RCs but skimp on the gears and servos…..blows my mind!!!!!!!
No. Broke both diffs in 5 normal runs, foam disintegrated in 3 out of 4 tires, and all the gravel and stones got stuck in the rubber boots for the diff cups shredding it completely, also more of the same for the center diff, 2 threads stripped from both diff cases, loose screws and nuts for the suspension turn buckles…
And I bought it when it was 800$, now traxxas reduced the price100$, which feels even worse for the first buyers. Remember guys, never buy 1st gen hardware.
What never disappoints for sure is Thunder videos, these are always freaking awesome.
Hey bro where do u get your gears from?
I got them from Hotracing rc 👍⚡️⚡️🔥
@@thunderrc thanks brother. Hate the monkey metal and been having a hard time finding gears for my Maxx v2
Wow insane bashing skills.
Thank you so much!🔥⚡️🏆👑
Sounds like a nitro gear mesh too tight??
Haha yes the gear mesh was a little too tight 😱🤣🤣
🧨🧨🧨🚀🛰🛰
Thank you brother!💯🔥🔥⚡️🏆
Easy fix
Have you ever tried or used the Hobbiesstar 1700 KV motor?
No but I want too!⚡️🏆🏆🔥
@@thunderrc well I just ordered it yesterday. It should be here Thursday the eighth. I’ll have to make some videos and try to give it hell and see how it performs.