Amazing!!! I loved your thought process in how you made this latch. You accounted for every possible detail and described them perfectly as I would expect. That type of latch would be great even if it was not part of a secret compartment. When you missed drilling the counterbore for the bushing, I was expecting you to get out your shaper origin to do that step. Thanks Ramon.
Glad you liked! Yeah, the latch could be used for many applications. I was more focused on the camera shot than what I was doing when I forgot to counterbore first! 😆 I thought about the Shaper Origin…but figured it would be just as easy to create a chamfer…and for me, less chance of “mis-takes” 😆. Thanks for checking out the video David
@@ramonartful So true on modifying the bushing rather than the door. If something went wrong and you had to make another bushing, that would be much easier than having to make another door.
Great video Ramon! Nice little Atlas too. My dad was a master machinist as well and I often think the same thing about wishing I had paid more attention when he was still around.
Thanks! I love that little Atlas! It’s not the most accurate but if I need something bigger and better, I go out it my dads shop. He’s no longer around but I love using the Bridport mill and his old 8’ SouthBend lathe! You and I are lucky…
Very clear explanation as always I am in search of such type of lathe as wel the ability to make smal pieces of hardware is so cool. And I think metal lathes AR fine to turn wood on. Most metal lathe are more sturdy and stoud Dan woodlathes wich is a great advantage
Thanks buddy. Yes…you certainly can turn wood on a metal lathe but not as easy the other way around. However, metal lathes have a ton of areas that require oil constantly. So, one has to be careful and not allow to much sawdust to build up in those areas. Sawdust soaks up oil like a sponge! 😆
For your bronze bushing try using a threaded brass insert. It has outside and inside threads. Screw the insert into the wood and drill out the inside threads to make a clean hole.
That’s a good idea on the interior threads. But I’m not sure how easy it would be to get an insert installed super clean. Their course threads tear its way into place. 😆 jk…they’re not that bad but still
I only do a few commissions here n there anymore. Just too busy with all the product I have. Those are sold primarily thru my website. I do have a couple custom orders in the queue. Thanks
So around 20:40 I share its function. The magnetic bar or latch must be locked or unlocked. It doesn’t stay one way or the other on its own. Go a little further im the video and you see a drawing. Now, soon I’ll have another video showing a similar but better design. The rod or latch is designed to be locked (magnetically) always…and the key opposes the force to unlock. Come back to see what the “key” looks like! Hint. It’s made for a client who’s a lifelong police officer and loves hand guns. Thanks
I feel like each long form video you post is like a mini master class. Thank you for sharing your knowledge. I really love your work.
That really means a lot! I simply love sharing & showing what works for me. Much thanks.
23:28
That is totally awesome! Great the client was as thrilled as we all are. A touch of magic to an incredible piece of work!
Thank you! The client (so awesome and patient) loved the bedroom suite. Seven total hidden areas! The one with the magnetic key was a favorite!
Your videos are fantastic - and your skill set is awesome. I always learn something, and enjoy it at the same time. Thanks for sharing your work!
Thank you so much! I appreciate the feedback and thanks for watching!
You knocked it out of the park on this one, excellent. As always, a great video. Thanks for the education
Thanks for watching! I love these types of projects
Damn that is too cool, makes me want to get a lathe! Amazing fit on the door and the "key".
Thanks a lot! This was simple enough to make without a lathe. I just love when I get a chance to use mine. 😬
Beautiful job on the bed and furniture, your new lathe looks fantastic too, hope you enjoy it! 👏👍😀
Thanks a ton for checking out the video! And yeah, I love that little lathe…I’ve learned a ton since getting it!
Amazing!!! I loved your thought process in how you made this latch. You accounted for every possible detail and described them perfectly as I would expect. That type of latch would be great even if it was not part of a secret compartment. When you missed drilling the counterbore for the bushing, I was expecting you to get out your shaper origin to do that step. Thanks Ramon.
Glad you liked! Yeah, the latch could be used for many applications. I was more focused on the camera shot than what I was doing when I forgot to counterbore first! 😆 I thought about the Shaper Origin…but figured it would be just as easy to create a chamfer…and for me, less chance of “mis-takes” 😆. Thanks for checking out the video David
@@ramonartful So true on modifying the bushing rather than the door. If something went wrong and you had to make another bushing, that would be much easier than having to make another door.
What a piece of work! Great stuff as always Ramon, thanks for taking us along.
I always appreciate your feedback…thanks a lot
Ramon, another awesome idea ! Great work as always.
Thanks a lot! I always have a blast doing projects like this. The customer wanted a “secret” compartment somewhere. Me; “Okay, I can do that” 😬
Great video Ramon! Nice little Atlas too. My dad was a master machinist as well and I often think the same thing about wishing I had paid more attention when he was still around.
Thanks! I love that little Atlas! It’s not the most accurate but if I need something bigger and better, I go out it my dads shop. He’s no longer around but I love using the Bridport mill and his old 8’ SouthBend lathe!
You and I are lucky…
@@ramonartful We are very lucky! I too love using the Bridgeport. Of all the machines in my shop, it is definitely my favorite.
Your awesome!!! Thanks for the excellent videos!!! Just started watching you recently and I have learned a lot from you, thank you Ramon!!!
That’s very cool to hear! Thanks for the feedback
Awesome stuff!! 😀
Glad you like! Thanks
You are awesome, currently building a speakeasy and this was so helpful!
Great to hear! Thanks for watching
I like that idea but what would you use for a normal size door or a bookshelf secret doir
Google search a “magnetic child lock”. I think Rev-a-shelf brand makes one.
Just open another portal of ideas watching this video canyon wait t I put it in practice . Like always enjoying ur videos
That’s always great to hear! Thanks for watching !
mate, as always, unreal content.
Thank you…I appreciate that. 🙏🏼
Very clear explanation as always I am in search of such type of lathe as wel the ability to make smal pieces of hardware is so cool. And I think metal lathes AR fine to turn wood on. Most metal lathe are more sturdy and stoud Dan woodlathes wich is a great advantage
Thanks buddy. Yes…you certainly can turn wood on a metal lathe but not as easy the other way around. However, metal lathes have a ton of areas that require oil constantly. So, one has to be careful and not allow to much sawdust to build up in those areas. Sawdust soaks up oil like a sponge! 😆
For your bronze bushing try using a threaded brass insert. It has outside and inside threads. Screw the insert into the wood and drill out the inside threads to make a clean hole.
That’s a good idea on the interior threads. But I’m not sure how easy it would be to get an insert installed super clean. Their course threads tear its way into place. 😆 jk…they’re not that bad but still
Where do you sell your stuff? Do you take custom orders?
I only do a few commissions here n there anymore. Just too busy with all the product I have. Those are sold primarily thru my website. I do have a couple custom orders in the queue. Thanks
I keep watching this and cant figure out how you got the bolt to stay popping out, almost as if its spring loaded, until the magnet key is engaged
So around 20:40 I share its function. The magnetic bar or latch must be locked or unlocked. It doesn’t stay one way or the other on its own. Go a little further im the video and you see a drawing.
Now, soon I’ll have another video showing a similar but better design. The rod or latch is designed to be locked (magnetically) always…and the key opposes the force to unlock. Come back to see what the “key” looks like! Hint. It’s made for a client who’s a lifelong police officer and loves hand guns. Thanks
@@ramonartful awesome, look forward to the new vid