Same here but I only have experience with steel. That weld test is gonna suck for me. Wonder if I offer a low pay rate for hire as collateral till I'm up to par with quantity will help.
Welders need more aluminum mig videos with both different wires 4043 and 5356 !! Big difference when welding and also with different mig welding guns… welded aluminum tank trailers and I won’t lie I burn thru before but also as you get better you learn to control your wire speed/ voltage…. This gun made aluminum welding look sooo easy since it is great machine but definitely most spool guns don’t run like that ! Great job to Jordan tho clean welds
Couple things, could you clean the ceramic off the root so we can see the penetration. Also, I cannot find ANYTHING in regards to ceramic backing for aluminum mig in 2G position. My 3G plate came out nice. My 2G plate has undercut on the upper toe in back but the bottom toe is clean with good fusion. Is it my angle or heat? .035" spool WFS -500, V- 21
I would love to see and know more of the aluminum pulse mig welding with more longer form explanation of the machine and process for us slow learner. Like the conventional vs profiles and setting choices Is there anywhere I can find more more info to read and watch. I do use some like these everyday for 8 to 10hr in fab ... just self taught though.
Nice welds, Wishing to learn all the settings on that feeder , I’m currently welding aluminum with a mpa350 and a older alumna pro feeder, we’re always fighting with porosity on the welds , can’t get the machine to rurn right ..
Hiring? I'm a TIG welder mainly but have been working on my MIG abilities the past few years and that's easy welding lol... serious about the Hiring thing. I'm a wisco resident also.... hit me back?
Excuse me guys I've only started my 2nd year Apprenticeship, on the Aluminium MIG process, what kind/type of wire is usually used please? I'm already Coded MIG (Flux core) and Stick 3G.
Usually 5k wore when doing migaluminum unless your anodizing and don’t want two color tones or it calls for a specific series. In my experience 4K and 5k are most common.
althuogh i dont like aluminium, excellent job... AND i missed that multimedia welding artwork with music - 3:03 - awesome job Mr Videomaker! (ruclips.net/video/dkZLWrGB7m4/видео.html)
![6ix9ine - El Preso (feat. Lenier) [Official Music Video]](http://i.ytimg.com/vi/RQvGgosdeO8/mqdefault.jpg)
👇WeldTube Store👇
www.weldlife.com
I would love to see more welds done with this process
Saaame
best conditions, best settings and best prep. 3 things makes ur weld is good
👇Learn more about Miller XR-AlumaFeed Suitcase Wire Feeder👇
www.millerwelds.com/accessories/wire-feeders/xr-alumafeedsuitcase-wire-feeder-m00338
Nice!! Loving the wire speed control and swivel ball on the gun
Thx bro. Got a weld test tomorrow we need more guys like y'all
Same here but I only have experience with steel. That weld test is gonna suck for me. Wonder if I offer a low pay rate for hire as collateral till I'm up to par with quantity will help.
Que bueno seria que estos videos tan interesantes pudieran ser traducidos para todos los hispanos gracias
Si que agan 2 videos uno en english y en español.
Amigos. Si nos gustaria. Por lo tanto no tenemos el tiempo suficiente. Pero pronto esperamos que si!
O que por lo menos tambien los traduscan asi como en voice over tambien. Pero no hay problema . Solo veo las tecnicas que usen y los aguestes.
@@nelson442 Simon. A si lo queremos hacer el mismo video con narración y subtítulos en español.
No speek english please sub spanish please.
God video👏👏👌
Would love to see more mig aluminum!!!
Mig Aluminum fabrication?! Wow.
@@weldtube Mig for Alumunium hollow
Welders need more aluminum mig videos with both different wires 4043 and 5356 !! Big difference when welding and also with different mig welding guns… welded aluminum tank trailers and I won’t lie I burn thru before but also as you get better you learn to control your wire speed/ voltage…. This gun made aluminum welding look sooo easy since it is great machine but definitely most spool guns don’t run like that !
Great job to Jordan tho clean welds
Agreed when I’m in shop making repairs I have a push pull when I’m doing full hull repairs out of town I have a spool gun runs completely different
Couple things, could you clean the ceramic off the root so we can see the penetration. Also, I cannot find ANYTHING in regards to ceramic backing for aluminum mig in 2G position.
My 3G plate came out nice. My 2G plate has undercut on the upper toe in back but the bottom toe is clean with good fusion. Is it my angle or heat?
.035" spool
WFS -500,
V- 21
Was that the actual speed he was going or was the video fast forwarded to make it look that fast?
I would love to see and know more of the aluminum pulse mig welding with more longer form explanation of the machine and process for us slow learner.
Like the conventional vs profiles and setting choices
Is there anywhere I can find more more info to read and watch.
I do use some like these everyday for 8 to 10hr in fab ... just self taught though.
How did y’all trick me into wanting to mig aluminum? Great vid and clean welds 👌
Good video! Nice to see pulse mig aluminum.
It looked like you had some heat distortion warp the plates inward. If not, I stand corrected; if so, how would you have avoided this?
So nice! That equipment! Nice work!
When you put the root in, is it like with flux? Was it just a stringer with a wiggle?
that wire speed feed speed control is insane
Is it true that tig welding stainless steel is the same as carbon steel but with just stainless you just gotta purge it
Are you running straight beads or are you weaving? 😊
A slight wiggle in the stringer will help fusion. _Slight_
Yeahhhh very good job 💪🏻👨🏼🏭🧑🏼🏭
How to bend Aluminum for the test? and at what temperature to bend?
Did you speed up the weldout or did he really just pour that joint in like 30 seconds?
Thats how fast it was! It was difficult to keep up with the cam!
Yup. That’s aluminum for ya. Gotta move fast or you’ll drip or blow thru
No mask with aluminum is crazy
No kizzy
hi i'm a welding inspector trainee , i like your Chanel love to see more vid
Nice welds, Wishing to learn all the settings on that feeder , I’m currently welding aluminum with a mpa350 and a older alumna pro feeder, we’re always fighting with porosity on the welds , can’t get the machine to rurn right ..
Are you running stringers for the cap or did you weave ?
Could you guys add in a tie in video with aluminum spool.
Good
3/32 not a gap . What kind gas you used it ?
What gas are you using ?
Good job
That is awesome!
Question on the crater fill...is that set for when you let of trigger?
Yes
Hiring? I'm a TIG welder mainly but have been working on my MIG abilities the past few years and that's easy welding lol... serious about the Hiring thing. I'm a wisco resident also.... hit me back?
Dominic repoblec 🧡
Hi guys, can i conect this aluminum suitcase to a generator ?
Nice weld 😎👍😎
Excuse me guys I've only started my 2nd year Apprenticeship, on the Aluminium MIG process, what kind/type of wire is usually used please? I'm already Coded MIG (Flux core) and Stick 3G.
Usually 5k wore when doing migaluminum unless your anodizing and don’t want two color tones or it calls for a specific series. In my experience 4K and 5k are most common.
3/64
Ни чего не понятно но очень интересно!
Love to see any of these vids in real world scenarios like on your back around a bunch of stuff instead of a plate anyone could do
Good welder
Good sir are you use argon gas please tell me👌
Yes aluminum uses argon to weld.
Nice toy 😱
1-. Clean with a wire wheel(down hill)
2-. Clean with a brush(uphill)
3-. Fail bend and X-ray test. 🤷🏻♂️
👍👍
Hi
Y u using ceramic in back side
Okay man thank you
How an earth thick is that plate Try that on 5mm you'd burn though
O like this too.
هاي مرحبا يا اصديقاء انا ابحث عن عمل انا اعمل في مجال الصناعة الأفران الآلية وفي محامص البزر وعندي خبرة في لحام الارجون هل اجد عمل ما في اي شركة
Уменьш подачу проволки, будет лучше. Слишком много брызгов
Please weld some aluminum pipe with this.
Yooooo
I'd say it would be no problem on a positioner rolling out.
althuogh i dont like aluminium, excellent job...
AND
i missed that multimedia welding artwork with music - 3:03 - awesome job Mr Videomaker!
(ruclips.net/video/dkZLWrGB7m4/видео.html)
Nopodemo enespanol
Can do better with basic spool gun. No need for pulse electronics, or ridiculous suitcase expense that will need repair, or replace in 5 years.
👍👍👍👍👍👈
Welding is ok but not good enough
Welding is ok but not good enough…
Your walling is not beautiful, inshallah my walling is more beautiful
U-LOO-MIN-OOM…..