The Beautiful Takumi Studio MG Sinanju Conversion Kit │ CUSTOM Build │ガンプラ全塗装
HTML-код
- Опубликовано: 9 окт 2020
- Sponsored by newtype.us/ITSAGUNPLA
→Mah Links←
Twitter ►goo.gl/2cS0uX
Twitch ► / itzagundam
Twitch ► / xiltix
Instagram►goo.gl/6kcLrD
Music ►goo.gl/W5ENUL
Patreon► / itsagundam
E-mail ► gundamprozac@gmail.com
PodCasts ►goo.gl/CEPVab
Music by Alumo
Music by @WhiteBatAudio 
Развлечения
와우..영상도 멋지고 작품도 훌륭합니다.
칭찬받는 것은 언제나 영광입니다
왜 내 동영상에 댓글을 남기지 않습니까? :(
My favorite gunpla dude giving props to my second favorite gunpla dude. This makes me irrationally happy.
Great vid man.
@@GunplaNewbie 아 ㅋㅋㅋ 귀엽네
I don't know shit about Gunpla or Gundams but these videos are a fantastic coping mechanism for anxiety disorder, cheers man.
I build gundams to cope with shit too. Try it out m8
As well as ADHD and OCD!
WACH GUNDAM UNICORN ITS ON NETFLIX AND ITS SO FUCKING COOL
u should build gunpla. it's relaxing and therapeutic
kits can get pretty cheap.
i started out full anal blast with the MG (mastergrade - lots of parts and a high time and effort investment) Turn Red Astray cause my lizard brain likes big sword so two big sword better lmao.
havent looked back since but my wallet has developed a bdsm fetish it has been opened up and punished so much
This kit sends my bloods to a special place.
and makes it hard
I don't think anyone wants their blood going hard lol. 😅 I know you mean something else.
@@MezzoForte4 He means it makes his special place go hard. ;)
@@Celestias hes selling his blood to buy that kit maybe 😂😂😂
The kit is covered in fingerprints I know, but I din't feel like wearing rubber gloves 😂
Raw no rubber
I get that!
Fair enough, here is a suggestion from a guy who also knows the value of putting legit rivets in your kits as details (yeah I caught that) Look into a jeweler's brass hammer. Might be a little bit of a cost but you are less likely to crack either the resin or the plastic when you make the punch as it is easier to control than a normal hammer.
What? I went to school to make fuckin' jewelry, they didn't let me graduate sure but I kept the tools. Here is an equivalent to what I use.
www.firemountaingems.com/itemdetails/h204853tl
Looks great man
only issue the external tanks are to complex for what are in the show throw way parts. like on real fighter jet drop tanks are cheap because there made to be tossed and not reused all the time. imo id gone for just making the making the a bit bigger in diameter then all extra complex stuff on them. since all they are are extra H2 and LOX tanks. maybe add some surface detail like you see on the Shuttles main fuel tank for thats used for insulation. one of the things i loved about Unicorn was we got see suits with ET's like from Advance of Zeta and Gundam Sentinel.
This is by far my favorite build Gundam has done so far and he just keeps getting better. I found the video calming and relaxing and looking at the finished product made me forget for a while what was going on around me, a true work of art.
Ok, ok! You produce the best vids imo. And the S track you put on just pure eargasm. I started watching this channel a while ago and it just gets better every time. Thank you.
I had no idea how much, love and care goes into making one of these. Watching the process was amazing.
I just got my shipment of this kit in and cannot WAIT to start on this! Ive been watching all the Korean reviews of this, and was waiting for someone amazing like you to make a vid dude! Thanks!
I've been holding off on painting my RG 1/144 Strike Freedom, I cannot wait any longer. I desire this level of production quality in my kits, and to reach that level, we must practice, learn from our errors, develop our skill sets, and keep on building. This video left me quite literally speechless, I usually skim through these build videos but I found myself rewinding the video and truly enjoying the production quality. 10/10 my friend, you got a new follower.
Mate, I'm so impressed with the quality of the video!!! Quality of the production is outstanding.
I'm really digging this channel man! It's got me itching to build another model. I already did two this spring due to coronafication. My builds are not as detailed as yours are but your work inspires me. Your work is absolutely stellar! I liked the added text overlays for a guy like me who doesn't know much about these.
The way you lit that really showed off the red. Nice.
Two years later and I still enjoy this video like the first time. Your work is captivating and gives me a feeling of nostalgia.
dude the sinanju is the best looking ms ever imo, and this extra add on kit somehow makes it look even more badass! Looks great dude wish I had the time and patience to work on a kit as diligently as you!
Simply Immaculate! Going to be a hard act to follow for anyone else doing this kit. Well done bruv!
I came across your channel a couple days ago and its gotta be my favorite so far. The work you put into your kits is awesome. I recently got into gunpla, but I haven't started painting yet, slowly working towards that along with getting the tools and materials I need. Watching your techniques and attention to detail has greatly helped and inspired me!!
The production quality on your gunpla videos is absolutely incredible. And your kits are gorgeous
To quote Borat:
“Verey Niace”
I heard this lmao
Your Gunpla game has sky rocketed since I started watching you years ago, props!
This was one of the best videos I've seen over here so far. This is in the realm of that Alec Steel flavor. So not loose this editor.
Alec Steel is alright but Gundam is more shurap. Really awesome metal work.
Great work GumplaRoss!! The models that you paint really look unique and it's cool that you apply not only what you know of painting but everything you pick up! Keep em rocking!
Thanks for not putting obnoxious dubstep music, I love you even more my guy!
A sighting of the rare smokey in it's natural habitat!😂
Love the choice of music, it compliments the camera work so well
Papa Gundam out here showing the world how its done yet again! Fantastic vid, awesome kit, cute furbabies. What more do we need!
The fact you mix in shots of your dog puts you leagues above other speedbuild/painting channels in my eyes
Absolutely Gorgeous !! I love the hangar set-up in the background too.
the painting you did on this piece is a piece of fine art. well done sir. you did the best build ive seen in years so far :D
Hands down - one of your best builds. Custom conduits look great. Will definitely be stealing some ideas for my build.
Your video presentation quality is just over the top, your paintjob skills are great and it really shows, really glad i found your channel
That red paint though is so shiny, reminds me of them bodybuilders oiling up before the pose down lol
Great video! You got me feeling the Gunpla fever again. I did built some great kits, then life happened and I fell off the wagon. Lol. Watching your build videos, got me thinking to start building kits again. Much love, keep making great videos.
Let me be honest, This Sinanju is the most beautiful custom-painted I've ever seen. The color is glistening reflecting the light.
This is literally a master at work. Incredible to see this level of dedication and mastery. This really is a BUILD. It's the most beautiful Gunpla ever! 😭😭😭😭
Honestly dude this has been your best piece and video. Good job.
Glad to see someone work on this amazing conversion. I've got mine sat right next to me (unpainted at the moment) and it really is nice. You did an excelent job on it not to mention that extreme gloss finish. Very nice.
I think I watched this way before I knew about itsagundam. Best of both worlds.
the production quality always improves with each upload, great work on this one
There i am, making a break from painting to let a wash on a Sister of Battle-Boltpistol dry, open youtube and see a nem Pappa Gundam vid.
With good service anouncements (clean your brushs&airbrush lads m lasses), solid craftsmannship (and yeah dude - you are not bad :P) on an intricate modelkit, cameos of she-who-destroys-every-toy-thats-plush, and of course, the one, the only, the Susans hate him, the Karens too ... Gundam. Live is good.
It shocks me how many people don't practice simple cleaning procedures. The condition of your tools will determine the condition of your work.
@@s13gouf60 Damn im a lucky git, 2 blessings by our best Gundam in one week. No wonder painting the highlights worked out fine today without hussle ;)
But fun and jokes beside ... s13 gouf i think its because to a lesser degree people
- fear to damage their (air) brushes, or
- because they give up on it because their cleaning efforts ended in a result worse then it was before, and - much more often -
- the simple fact that its tedious busywork, aided by inherent lazyness.
You know the meme: Everybody gangsta till ...?
Well "..." for offroad biking, 4x4 or even tank driving is funnily enough the same as for painting - cleaning the mess afterwards.
Some jump in the hobby because it looks fun, and buy a little starterkit with colors, a brush and maybe a model.
Or they buy this hot airbrush that is recomended by everyone and their dog and they allways wanted to try their hand with one.
And they paint.
And have maybe even fun in the best case.
And then they have to "clean" their tools.
But how to do that is often not exactly clear, or cared for by the user.
Instructions are often about how to paint ... but not about how to clean it correctly (or those are very general).
If they are lazy they scrub the tools a bit and think all done, cool.
Or they look for tutorials, but there are different methods that contradict each other, or only colors of type and brand xyz, or some tutorials brush over it shortly because its a basic knowledge that "everyone knows already" ... or say oh cleaner xyz is absolutly needed and the best, everything else is bs ...
And all that can be a hurdle, that can influence people that start the hobby, that are at the beginning of a learning process that focus to create something fun and nice. Not on maintenance, in ther pov.
Maybe they clean their brush as they deem it correct ... and it looks nice while wet ... then it dries and looks like a collection of pubes sticking to a public toilet seat.
Reasons for this are many (like sticking the brush to deep into a pot of paint), but they don`t know that, for them it looks like ... oh f-this, cleaning isn`t worth the hassle.
And so they make do with what they have, or acquire bad habits ... or stop the hobby because buying new brushes every few weeks is bs.
And dont get me started about airbrushes and melting seals with agressive thinner ... or damaging the cone/internal nuzzle with the "cleanigbrush" for airbrushes.
Im getting grey, but still just a beginner in many parts, learning everyday what i made wrong or sub optimal in times past.
But a couple years ago i began to start this hobby again, learning steadily (all hail the internet!!) and im on ebay from time to time looking for bargains.
When i see very hot sets/konvoluts on the market for lowball prices i sometimes contact the seller and ask why they sell it for so low.
Sometimes its a case of daddy/partner died and kids/partner don`t know the worth.
Seldom its a case of my bf/gf/husband/wife cheated on me so i sell all for almost nothing (i dont touch those offers with a 10 yard pole)
But often its the same story, leading to this rant.
On the other hand you see things like, oh i painted only once, toolset&brushes brand new... and the brushes are making a damn convincing dead sea impersonation, while the color pots look like freddy kruger had his fun with them .. thats just pure lazy then.
TL/DR: lazy, not knowing better, lazy, resigning because cleaning it never worked out, lazy ;)
by far the sickest custom sinanju ive ever seen. awesome!
You really outdid yourself with this build my dude, truly a work of art. Your rant videos help me laugh at the modern world's stupidity, and your gunpla videos are calming and soothing. Keep it up, never stop creating!
Man Gundam your skills are totally improving and constantly getting better and it shows Simply Beautiful
海外の塗装職人は日本と違って敷居が高い中、素晴らしい仕事をやってのける。 流石です。
model looks great man! level of production quality in the vid is pretty rad too
ps. just finished the video... this was incredible. such a clean design and paint job!!!! AMAZING.
Bro, your work with the kits and video presentation are unmatched.
Honestly, I don't really have any interest in trying my hand at gunpla but holy shit that looks beautiful. The whole video does honestly. Well worth the time and money put into the video production because my fucking god man the quality of this video puts 99% of shit on youtube to shame. Great music choice, camera angles, lighting, no wasted shots, love the dog clips as transitions (first time seeing your dog its so damn cute), and quite honestly i really enjoyed watching you build this. I checked out this channel cause you keep talking about your gunpla channel in the other one, i knew what gunpla was and just wanted to see how good you were and very impressed will watch again.
I’m actually shocked at how good that looks, great job
Shout-out to your editor papa gunpla! That was an amazing edit!
Thanks for doing an amazing job on my fav mobile suit!
so much dedication and quality, well done
Breathtaking, among the best I've ever seen for sure!
The Presentation and craftsmanship is amazing. Nice job!
That work of art, is the centerpiece for any collection..
Nice work pops. The greatest achievement that must be mentioned is how it's free of pet fur.
Dude this right here is a piece of art that you have created I thank you for sharing this I have recently got into the hobby and your work and videos show me what is possible with time and dedication not that I aim to imitate you but I feel that you have at least set the bar for the RUclips gunpla community my apologies for the novel
This is the most awesome and beautiful GunPla I have seen. The red colour is so delicious.
Just found your hobby channel LOL. Have really enjoyed your excellent "It's A Gundam" channel too. Beautiful work here Gundam, thanks for showing this side also.
Looks great, loved the exit cut over view was very well done.
Hey Gundam! I just bought an air brush. (Never touched one) Now I can subscribe to this channel and actually learn a skill instead of just admiring. Woot woot!
Gorgeous build. Makes me anxious to build my MG Sinanju with the Takumi kit.
I envy this man's talent this is what art looks like!!!
This is what I imagine what a Porsche would look like if it was a MS, amazing job.
Well then you know nothing about Porsche. They utilize a completely diametrically opposite design philosophy than you can see in this kit with its many hard lines and countless visually distinctable parts...
Damn! You improved so much, since a year ago. I started watching you for your Twitch rants, but share the hobby and loved it, that you started making build videos. But I haven't watched build videos through the past month in gerneral. And now I just sat down with a bowl of ramen and searched for a gundam custom build. love the Sinaju and so klicked this video. An so I was enjoying the great work that was presented to me an all of a sudden I saw your dog and though . F.... it is its a Gundam .. looked after the channel and it really was you and I was amazed how far you have become. My full respect for you work man.
The more reason why edgy red mobile suits are cool is this one. Like just seeing the Thumbnail fills my day.
Everything in this build is amazing. I super partial to the Sinanju and I hope one day I can do something even close to this
im more impressed of how he managed to not break the sunanju's torso rather than the customization cuz its prone to breaking
If he used the ova Sinanju the waist joint is less prone to breaking cuz it uses polystyrene vs the ver ka that uses stiffer abs plastic
Meanwhile I feel special for customizing the Sinanju Action Base, and Gundam over here making true art
dude these are so epic!!! very impressive, im gonna have to try one! i usually do planes but these look fun.
Hands down best build Ive seen yet.....
Damn here I am just putting the kit together and calling it a day. This work is impressive !
Precision
Style
Sophistication like no other
Itsagunpla you should be watching.
This commercial was brought to you today by this discount chow mein from the grocery store I'm eating while watching.
この美しさはいつまでも見てられる
Amazing details my guy. This is the first video from your channel that i watched and i am alr subscribed. Well done :)
Amazing work and amazing video papa G!!!
Now i can finally sleep well..this build is so breathtaking..
That is the most beautiful and awsome sinanju i have ever saw
It turned out great! Good work man! I too love that splash 2k!
this editing is top quality, mad respect
Damn!!! That looks so clean...so awesome!!!
Dude, this is simply AMAZING! Well done sir, well done INDEED!
Beautifully fucking illustrated 🙌❤️. From ur earlier vids to now u’ve came a long way! 👍 Keep making us proud papa Gundam!
Beautiful build and a great kit.
I don't know a whole lot about Gundam or Gunpla, but this looks just as cool as that triple 6 Gundam that had the enormous stand.
Going to be watching more of these.
I dig the soundtrack. Rise and grind!
love how the gold trims were separated to black.. man this is bloody awesome.. =)
Just wow. Beautiful work.
You. Beautiful. Bastard.
This right here is the kind of content which justifies the existence of RUclips and makes you one of the best damn creators on here Papa Gundam.
I love the Sinanju, this just makes it look deadly and one you really don't want to pilot against. Going for the OVA kit + This conversion kit will just Char kick my wallet away. But worth it for this glorious Zeon suit.
マジでカッコいい。
ツヤツヤしてるのがまた良い。
Amazing work.. dream that one day I can complete a kit even 1/2 as good as that
2:16 -- Very confused for a few seconds wondering what part of the kit that was with the lovely burnt iron patina on it.
"That is called a 'hammer'. It is a highly specialised tool which we modellers use for hitting things."
Jokes aside, GJ Chaz. You can see exactly where the weeks of effort went.
broken parts I made new ones with metal rods.
this sinanju is so shining.....its like its brand new out from the factory
As usual beautiful build and the paint job is amazing. You managed to get like this perfect balance of gloss but without taking away the shading you did. Usually super gloss kits I see are just flat gloss, relying on the shininess to give it definition.
Also I am more and more impressed by the videos quality lately and I can see your actively trying new things during filming and editing (9:20)
I think you should work on experimenting with transitions next PapaG, I think you can get some really cool transitions with the current shots you have. Like 2:48 when the camera pans behind your booth which could be a great wipe transition. The editing on 9:20 was really cool too and it matched the tempo of the song but it might've benefited as being the revealing shot for the final assembled Sinanju. Kinda like a suspenseful reveal or something.
Ofc this is if you have time cuz your busy as hell and spending hours on a cool 4 second shot isn't always worth it and I'm sure you have a ton of ideas you wanna try out
These build videos are pretty relaxing ngl
This is amazing, nice video, nice Gunpla, nice painting
a work of art and craftmanship.
One of your best works yet!
The paint just makes it pop, wow...
Very nice job, love the paint work
It’s red so it goes faster.
Fact.
🐍
💀 no step on SNEK! 🇺🇸🇭🇰
Da Orkz like this
3 times as fast, as is tradition
ORK APPROVED
Warboss approved.
GORK approved
Awesome video. Great job on the kit.