I kept trying like 10 times and screen would come on for a second or 2 but never a K on screen . I then disconnected the hdmi cable so nothing was connected. Then I got the K on second try. Re initialized and tv works again. thx
Tampatec what do I due if my lg TV buttons won't work like I CAn turn on the TV that's it but I have. no remote and I just wanna get on the HDMI to play my ps4 and I saw your phone connected to your TV how do I connect my phone
Well I did a Hard Reset, Nope. Then a Menu Reset (got 8 "OPC: leaves), No "SHARP" or "K" button, just snow and some hard to see snow where the grey patch is. :-( I'd try the third method but I don't have the arms for it. ;-) A note just flashed in the lower left corner (to fast to read) and the TV turned off, I'll wait a few minutes to see if it automatically turns back on or I'll turn it on? I tried the "Input" trick and now have a blank, black (no snow) screen and no hdmi channels? Well, audio is working, still black screen. Embarrassing, I forgot the HDMI cable, still have grey.
Hi mate! You were amazing. Thanks for getting straight to the point. You have resurrected my tv that sat for over 2 years now. A local DIY dealer asked for $40 for the job I got done through your instruction in 3mn. Thanks a million !!!!
Thanks a ton for posting this. My Aquos would not work with either of the remotes I use to operate it. Was starting to see what it would cost for a new remote sensor when I found your video. Unplugged it for a minute, turned it back on and all is good. Thanks again!
My TV was down for two months looking for qualify tech to solve (black screen a few seconds after switch on without sound) and back to life now with the "Volume down + input" Thanks a Millions !!!!!!!!!!!!!
I just seen your video.. I was told I need to reset my TV because my RUclips does not work correctly I called AT&T and they said it was my Sharp TV... thank you for your time and making a video I want to try those methods that you did and hopefully one of them will work have a good day
I couldn't quite figure it out for quite a few tries, but finally I got the K, entered the service menu, went through all 26 (in my case) pages twice, and turned the TV off. Turned it back on and it worked! Thank you so much!
My sound wouldnt work so I put the TV in storage for a couple years because we didn't have a remote to get into the settings and reset it that way.. I held down the volume and input and it works again. You're the man.
Excellent video with outstanding tips! I have a Sharp 37" Aquos that was dead for over six months, and I could not find any useful information anywhere online. Finally, as I was just about to drop $$$ on some replacement modules or possibly send the TV off to e-waste, I came across this video. I used your 3rd suggestion on how to reset the TV and PRESTO, back in business! Man, anybody in your neck of woods who needs in-person service is lucky to have you there. 1000x thanks from California!
Wow this worked! Been trying for days to figure it out. Thanks for short and simple video. Also I had to make sure to manually turn TV off before unplugging so it didn't automatically come on when plugging back in. So happy to have my TV back.
thank you so much, I can't even tell you how happy you've made me I've tried everything searching the internet for hours to no avail and your method of holding the input button as opposed to the channel down was the one thing that works I am literally at tears thank you thank you thank you so much.
Many...many...thanks my friend! I thought I was either going crazy or my TV was on it's way to the junk pile. You saved the day! Keep up the good work!
Thanks fer gitin our sharp fixed up man. After bout three attempts at goin thru tv situp the wife and me got ours a goin again. Granddaughter had pushed a bucha butons on remote and locked er up. We have Aquaos LC-70LE734U model, bout 5 yrs old. Thanks again tampatec fer the fix!
Do you have any idea how i can fix a Sharp TV where i tried all this but it keeps being stuck on a screen that says "do not power off. Scan. And then a loading bar for the scan? If you see this and respond, great thanks in advance!
SO when I hold input and volume- nothing happens, but I also saw pushing volume- and power works also, so I do that and it actually powers on. idk if im waiting long enough but how long until it cuts on when holding input and volume?
hello this is Miguel I have a question My sharp tv works but sometimes goes black screen until I reset holding the power button for a couple of seconds do you know what is going on with my tv
Hi! I have Sharp Hisense LC-55P6000U. It powers on, but when I press a button on the remote a blue circle come up and will not function. No inputs at all. Do you have any ideal on what's going or what I can do?
I can't get to the service menu using the Vol - Input key method. I'm trying to fix an intermittent power cycling problem by doing a hard reset. Firmware is up to date. Any suggestions would be greatly appreciated...
I managed to get to the service menu, and set RESET to ON, but nothing happened. What more should I do after taking this step? Do I just unplug, or... ?
If i do the reset will it still go into service mode if its a bad led? The problem is itll power up like normal show the sharp display then goes black and the bottom power light has a steady blink . Sharp 80"650u
Hello. I have a question. I have a sharp LC- tv. Has the one long and one short error code. I replaced the bad leds. Not able to get tv into service mode to reset. I have tried several different ways. Can you advise? Thank you
Is using the service menu even more of a reset than the factory reset built into the menu? I have the LC-55P6050U and just after 2 years the audio suddenly went out on the speakers. The headphone jack works, picture, inputs, apps all work But without sound on any of them through the built in speakers only the headphone jack. Would this also be the main logic board?
our house recently got struck by lightning and now the hdmi ports dont work. do you think any of these resets will fix it or will i have to get a new circuit board.
my daughter is throwing out her Sharp TV do to the red and white lines across it. Can this TV be savaged? The screen is black with two thick multi colored lines at the bottom and the white and black thin lines at the top. Please tell me I can save it. If not, it's ok
Hi I have trying all sorts of things on my SHARP TV LC-40cfg6021k40" there is only a joystick button bottom right corner and the remote TV is stuck in colour testing mode looping round green red blue white etc Please is there anyway to reset this model as I can't do the things you suggest as there are no buttons on the TV Many thanks Winkie
Do you happen to know how to reset Sharp Aquos 55EQ3EA? This model has only one small "joystick" that should also work as a button. My TV is in loop reboot mode after a Sharp issued update and I can't find a way to reset it: TV turns on, Sharp red logo for a few seconds, Google logo animation comes up next then after some time it reboots. Any help would be really appreciated, thanks.
I have a LC60E69U. Last night my brother pushed a wrong button on his universal remote and changed the input. He couldn't find the regular tv remote so he went to the side of the tv and started trying to change it from there. He hit the menu button and it froze the tv in that mode. Nothing I do will change it. I followed your instructions above for a hard reset but it would not even turn on from there. I am furious figuring I have a huge repair bill coming because of him. Do you have any suggestions for me before I have to put out the money?
I have sharp aquos 2T-C50AE1X. How to hard reset if it has only power button? No channel or volume button or not even input button. And may you have firmware link to my model?
I have a SHARP AQUOS QUATTRON LC-52LE925UN and a SHARP HT-SB 600 Sound Bar unit and subwoofer. I use a satellite TV setbox. Everything is connected to the rear of the HT-SB 600 panel. The HDMI out goes to my HDMI ARC input of the TV. Problem is that I cannot control the volume anymore fom my Satellite box remote control as before. Sound is off too (Lip-synch) .. I have tried everything and do not know what to do anymore. Any suggestions? Thanks
Hi, any other suggestions? The image is appearing upside down. I tried the first two options and didn't fix it, and when I try the third resetting option nothing happens, even after holding for over a minute it never starts up with a "K" on the screen.
I work at a TV rental store doing repairs and we get a lot of our sharps back with bad panels.problems such as dark spots and little bright white etchings.. i had them quit buying the aquas models.. being 60 and 70 inch tvs we were losing a lot of time and money..cool video
Hello. I have a TV SHARP LC-60LE652E, when connecting the power cable the LED is blue and when operating the remote control flashes red but does not start, I tried resetting with vol - and input but without effect.
OMG...I'm so very glad I found this video. I was going out of my mind for an hour trying to unlock my Sharp Aquos tv's control panel buttons that I'd accidentally locked by pressing the wrong on-screen button! This video saved me$$$..thank you!
I guess my TV is a goner, I woke up and it had no picture but it had sound, I tried holding down channel and and input and held them down while plugging it in and waited with it held down and I lost sound. TV is a Sharp 42 inch 2008. They don't even make parts for it any more. Any other suggestions before I toss it ( in a lake, Lol)
Please advise/help I have a sharp tv (32BC5K) and while doing a software update, it failed at 3% and has only showed a blue screen with text saying "an upgrade failed" with the power indicator flashing red and white. It won't let me do anything including turning it off. Whenever I unplug it and plug it back in, it doesn't even stay off as it turns on by itself and shows the same blue screen with flashing power indicator
YOUR THE MAN!!!! Glad i Subscribed. Have an old Sharp LC-19SB15J Your tip on pressing Input & Vol- then plugging it Finally turned it ON, get this I reset it needed but it won't turn on without doing your tip so it stays on i guess its working... But wasted hours on other internet tips pressing different combinations of Volume & Channel buttons, not 1 mentioned the Input button. Thank you so much & God Bless you! (David G. Yakima, Washington)
Thanks for all the help with the Sharp TV's! I have a 90inch sharp aquos LED and I'm trying to connect it to my LG - XBOOM stereo. But I'm having a bit of trouble. Any advice or suggestions? I've been going through settings and have been trying to figure this out. Any help would be greatly appreciated. Thanks! Keep up the great content.
Dont know if you have a solution...but I have a sharp lc37db5u, 05' model I think, and the hdmi port is being weird. It displays my Amazon fire tv. My ps4 won't display at all and my snes classic only has video, no sound. However before I got fire tv the snes classic worked fine. Any correlation between the two or has something else just randomly gone wrong?
Nice vid mate. I have an older model Sharp TV and was thinking about getting into the service menu so I can do a grayscale calibration as these features aren't available via the picture menu as they are on current TV's that I've seen. Do you know if the service menu shows this and how you save and exit from the service menu if you use the 9,9,9,2,2,2 technique?
Hi, I have the SHARP AQUOS LC-70LE640U, I need to know if this TV has mirroring capabilities of its own? Without using the Chromcast? Even using the Chromcast Ultra I still can't mirror my phone with the TV. It will make the initial connection and the little gray bar shows the initial page and says " connecting " and it doesn't go away. I try to move away from that page but the TV stays frozen with the screen showing the connection. I can connect with the Chromcast to RUclips but that's all. I'd appreciate any help...
A few questions, If my TV is hardwired to the modem/router, do I still need to update using a USB? We don't have a physical remote and the app doesn't appear to have any functionality, even after setting up the port. We are having problems navigating the menus using the buttons on the TV. We lost the ability to select the options, the volume/channel buttons cycle multiple times in one touch. The volume stops working and it won't turn off unless we unplug it.
On my Sharp Roku lc-50lb481c the picture went blank all dark. All I have for buttons is a power & a reset little button no volume or any other buttons to reboot the tv. So is there a way to get around it?
How can we access the menu if we cannot view it because it's a black screen? Have tried plugging out & in to no effect. We do not have an input button on the side, would this be the source button? TV not even 4 years old 😕
Hey man not sure if you can help i have a Aquos Sharp it has a blinking light in the middle don't get a picture tried the 3rd method of reset and it gives me sharp blinks twice and get a black screen any suggestions? Btw i subscribed like your content.
I installed a new video card in my PC and the result what that I would need to unplug the HDMI cable each time I went from TV to PC. As part of trying to fix this, I reset my older Sharp Aquos TV (Sharp Aquos LC52D64U 52-Inch 1080p LCD HDTV) using the on screen menu system. Now, no matter what I do, it won't scale properly and text looks fuzzy. It seems to be overscanning. Any idea how to fix this?
As often happens, I figured out how to fix the problem myself. The TV had reset to default view; I needed to reset it to dot-by-dot and everything was OK. I hope this helps someone who might have a similar issue.
Hey There, I can get to the menu stage but the TV just turns off and i can't go any further with the steps, and ideas/help why the power keeps turning of?
Hello @tampatec i have Panache P32LJ520HD tv and the panel is locked and I do not have a remote control. How can I reset my TV? P.S. I cannot find an input button. Thanks. :)
I have a Sharp LC-52D85UN that won't power on. The power and OPC lights blink 2 times together and then the OPC light flashes 3 times. I pushed the volume up and channel down buttons while plugging in the power and the backlight came on, but I can't get the TV to display anything with the remote. I can power it off and on with the remote and the power button. If I hit the Menu button on either the screen seems to get a bit brighter and the reverse when pressed again. I tried the Input and Volume Down sequence to no avail. Any other ideas as to what could be wrong? It doesn't seem to be the power board, since the backlight came on. Any assistance would be greatly appreciated.
Tampatec I have a sharp 80inch and it has a horizontal line, but it not as a whole line. From one end to the other it bearly getting to one end of the tv. T-con problem????
hey man, my mom's proscan flatscreen TV is a bit messed up. ok so we will have volume and everything, but the picture is fading, and goes in and out, not complete black but will pulse in and out, if you could just reply back if its a simple fix. the warranty already ran out and moms pissed, so I kinda need to try to fix it if it's nothing to serious thank you.
hey there =] i just got a 46 inch sharp aquos tv, the picture is blurry, like it is trying to catch up from some sort of lagg, i only have my xbone connected to it, doesnt matter if its a film or game its like turning ur head to fast, hopefully these tips help :D will let you know
Bought an LG tv from hotel. Plugged hdmi cable into bell fibe receiver and back of tv-only white snow. Used an lg remote to confirm that input source locks are all off. Only way to use tv is with lg remote, have to change input to HDMI each time then go ahead and use bell remote. I don’t want to use 2 remotes. I only want to use Belk remote. Please help.
I have a sharp TV model LC-43LE653U I tried the 3rd way you explained how to reset the TV, however it does not bring me to the service menu, any advice?
i have a 50 lb371u flatscreen. when receiving input from my HDMI the power light is flashing with a red doulbe type pulse sequence. I was informed it should be solid white light. Can you tell me what is wrong
I tried all 3 and the one someone mentioned in the comments section. And nothing is working for me. Mines is a two person job and I unplugged everything connected to it and still nothing is working for me. Any advice?
hi. i have a sharp aquos lc50ue630x that it gets stuck and alternates between sharp logo and loading symbols. searching for answers on the net, resetting does not work. the next step i need to do is to have the firmware upgrade but i can't find on the net. can you help me?
Hey man... My tv is like seeing triple... Its half way up from the bottom like a jumpy flickering triple effect. I tried resetting it... But its still not normal. It wasnt dropped or damaged. It just stopped working right tonight. Any clue?
There was a strong power surge and my Sharp LC70LE734U went dark. The main board and power supply board have been replaced. The white V at center bottom comes on but will blink 1X then blink 3X quickly and this just repeats itself. What now?
Hey guy when I try to reset holding input vol down panel lights for a second then stops an blinks again but if I hold channel down vol plus plug in tv will run all day not seeing any LEDs out picture is great. Could this be a main board issue thx Ed.note it had a bad led driver board.
Hey, I was wondering if you could help me. My Sharp Tv looks like a CRT display when it's on. I think the pixels themselves are messed up in some way, but I'm not sure. I'd appreciate any advice. Thank you in advance.
How can I do a hard reset on Sharp Led TV Model No: LC-40LE430M ? I've tried holding down (Vol-) + (Input) while powering the TV but it doesn't take me to reset menu but instead asking for password and then display "Input Locked' . Is there any other combination button for that particular model?
Hello can you help me with this.. i have this aquos lc-40le360d3 model, but the remote is not working anymore. I can still navigate the channels using at the back buttons. The usb still works but the problem is when i open the usb, i cant do anything (ex. choose what to play from the usb.) The back buttons can navigate like choose left to right the files in the usb, but i cant play what i choose using those buttons! 😭😭 is there a solution for this?
Try reset, unplug tv power for 1 minute. Next try replacing batteries in remote and check for dirty battery connections in the remote, if you take your phone camera and face it towards the remote then press a button on the TV remote you should see the IR sensor blink on your phone if remote works. You could have a loose connection on the TV ir board or bad main board. Get tv boards at shopjimmy.com or electropartsonline.com * let us know how you fixed the TV.
Hey man How re you . I have problem with muito Sharp aquos lc 55 4k It s turn on but nothing happen or show. I couldnt acess service menu. Could you help ?
Bro, I have sharp LC-50UE630X but I don't have Input Button, only Devices and Enter buttons and I tried to press each one of them but I couldn't access to this menu, I there any way for factory reset for my model? please help.
The volume up and input does not work it briefly turns on then off. I can get it to turn on with volume up and channel down buttons, the volume down and channel down says not available. It also has one long flash and one fast flash, any suggestion's?
Followed your instructions on the video. Everything worked up to the last instruction with the green screen. We pulled the plug for 30 seconds and plugged back in, however, only a black screen and a flashing boomerang appears. What should be the next step to get the picture to appear. Thanks.
Hey man thanks for the informative video. I have a sharp aquos 26 which works sometimes and is mostly dead. At random times of the day the little blue boomerang light near the IR blinks inconsistently. It also does this as soon as i plug it in to the wall but totally refuses to respond in any other way. Be in the input vol down buttons the pull out and re enter power cable nothing works with it. Do you have any ideas..? Thanks for any time and advise in advance. Uk, London
I have a 48 inch Sharp Aquos TV and when I tried to turn it on it comes on then it turns off and the ofc light keeps flashing in the front is there any way you might be able to help me out and tell me what that might be
My Aquos Sharp smart TVs keeps turning off and on. Once on I use remote volume and it turns of then on. What could this be? Any assistance is appreciated.
Have a LC60e77un. I get to "K". When I press vol down and ch down the menu screen appears for a second and then screen goes blank. The menu screen does not hold so I can not reset. Any ideas? Help. Please.
I kept trying like 10 times and screen would come on for a second or 2 but never a K on screen . I then disconnected the hdmi cable so nothing was connected. Then I got the K on second try. Re initialized and tv works again. thx
zeus winston thanks for posting your experience, that should help others.
Tampatec what do I due if my lg TV buttons won't work like I CAn turn on the TV that's it but I have. no remote and I just wanna get on the HDMI to play my ps4 and I saw your phone connected to your TV how do I connect my phone
Well I did a Hard Reset, Nope. Then a Menu Reset (got 8 "OPC: leaves), No "SHARP" or "K" button, just snow and some hard to see snow where the grey patch is. :-(
I'd try the third method but I don't have the arms for it. ;-)
A note just flashed in the lower left corner (to fast to read) and the TV turned off, I'll wait a few minutes to see if it automatically turns back on or I'll turn it on?
I tried the "Input" trick and now have a blank, black (no snow) screen and no hdmi channels? Well, audio is working, still black screen. Embarrassing, I forgot the HDMI cable, still have grey.
@@TampaTec My Sharp Aquous LC-40D68UT is doing the same thing as Zeus', but my screen won't stay on...no K...any ideas?
Tampatec what happens when the k is on your screen?
OMG, somebody who gets right to the point without a lot of blah, blah, blah. Thank you so much! You got my thumbs up!
So true
Hi mate! You were amazing. Thanks for getting straight to the point.
You have resurrected my tv that sat for over 2 years now. A local DIY dealer asked for $40 for the job I got done through your instruction in 3mn. Thanks a million !!!!
Volume down + input worked! I've had this "broken" TV for 3 years. Thank you so so much!!!!!!!! I am cheering so loud! a million thank yous!
Thanks a ton for posting this. My Aquos would not work with either of the remotes I use to operate it. Was starting to see what it would cost for a new remote sensor when I found your video. Unplugged it for a minute, turned it back on and all is good. Thanks again!
THANK YOU! Worked on first try of disconnecting power cord for a minute. Appreciate how you are direct & get to the point. 👍👍
My TV was down for two months looking for qualify tech to solve (black screen a few seconds after switch on without sound) and back to life now with the "Volume down + input" Thanks a Millions !!!!!!!!!!!!!
I just seen your video.. I was told I need to reset my TV because my RUclips does not work correctly I called AT&T and they said it was my Sharp TV... thank you for your time and making a video I want to try those methods that you did and hopefully one of them will work have a good day
Follow #3 advice and #3 worked for us! Sharp was no help what so ever. Thank you for your help!
thank you so much! I was about to put my TV outside with a "FREE" sign on it when I ran across your video. Now it works!! You are awesome!
I couldn't quite figure it out for quite a few tries, but finally I got the K, entered the service menu, went through all 26 (in my case) pages twice, and turned the TV off. Turned it back on and it worked! Thank you so much!
My sound wouldnt work so I put the TV in storage for a couple years because we didn't have a remote to get into the settings and reset it that way.. I held down the volume and input and it works again. You're the man.
You literally saved our television. Thank you a thousand times over!
Excellent video with outstanding tips! I have a Sharp 37" Aquos that was dead for over six months, and I could not find any useful information anywhere online. Finally, as I was just about to drop $$$ on some replacement modules or possibly send the TV off to e-waste, I came across this video. I used your 3rd suggestion on how to reset the TV and PRESTO, back in business! Man, anybody in your neck of woods who needs in-person service is lucky to have you there. 1000x thanks from California!
Wow this worked! Been trying for days to figure it out. Thanks for short and simple video. Also I had to make sure to manually turn TV off before unplugging so it didn't automatically come on when plugging back in. So happy to have my TV back.
Congrats fixing your TV 📺.
Hey, Im Erich from Temuco Chile, today I fix my tv set after 2 months, and a did it thanks to your video, thank you very much...👍🍻
thank you so much, I can't even tell you how happy you've made me I've tried everything searching the internet for hours to no avail and your method of holding the input button as opposed to the channel down was the one thing that works I am literally at tears thank you thank you thank you so much.
Many...many...thanks my friend! I thought I was either going crazy or my TV was on it's way to the junk pile.
You saved the day! Keep up the good work!
Thanks fer gitin our sharp fixed up man. After bout three attempts at goin thru tv situp the wife and me got ours a goin again. Granddaughter had pushed a bucha butons on remote and locked er up. We have Aquaos LC-70LE734U model, bout 5 yrs old. Thanks again tampatec fer the fix!
My Sharp Aquos does not have a volume down or channel down. It just has a compass directional thing on the back. Any help for that??
Channel down volume down worked for me. Thank you so much.
Do you have any idea how i can fix a Sharp TV where i tried all this but it keeps being stuck on a screen that says "do not power off. Scan. And then a loading bar for the scan?
If you see this and respond, great thanks in advance!
SO when I hold input and volume- nothing happens, but I also saw pushing volume- and power works also, so I do that and it actually powers on. idk if im waiting long enough but how long until it cuts on when holding input and volume?
hello this is Miguel I have a question My sharp tv works but sometimes goes black screen until I reset holding the power button for a couple of seconds do you know what is going on with my tv
Quick question will this fix the tv turning off on it's own every few hours ? Thanks for the video
Hi! I have Sharp Hisense LC-55P6000U. It powers on, but when I press a button on the remote a blue circle come up and will not function. No inputs at all. Do you have any ideal on what's going or what I can do?
I can't get to the service menu using the Vol - Input key method. I'm trying to fix an intermittent power cycling problem by doing a hard reset. Firmware is up to date. Any suggestions would be greatly appreciated...
I managed to get to the service menu, and set RESET to ON, but nothing happened. What more should I do after taking this step? Do I just unplug, or... ?
Major props most impressive sir! My sound on my sharp just stopped working. Fallowed the reset per the menu, worked like a charm!
If i do the reset will it still go into service mode if its a bad led? The problem is itll power up like normal show the sharp display then goes black and the bottom power light has a steady blink . Sharp 80"650u
Hello. I have a question. I have a sharp LC- tv. Has the one long and one short error code. I replaced the bad leds. Not able to get tv into service mode to reset. I have tried several different ways. Can you advise? Thank you
Is using the service menu even more of a reset than the factory reset built into the menu? I have the LC-55P6050U and just after 2 years the audio suddenly went out on the speakers. The headphone jack works, picture, inputs, apps all work But without sound on any of them through the built in speakers only the headphone jack. Would this also be the main logic board?
our house recently got struck by lightning and now the hdmi ports dont work. do you think any of these resets will fix it or will i have to get a new circuit board.
my daughter is throwing out her Sharp TV do to the red and white lines across it. Can this TV be savaged? The screen is black with two thick multi colored lines at the bottom and the white and black thin lines at the top. Please tell me I can save it. If not, it's ok
Dear Tampatech, I am grateful to you for the first reset option, my menu is working now.
Hi I have trying all sorts of things on my SHARP TV LC-40cfg6021k40" there is only a joystick button bottom right corner and the remote TV is stuck in colour testing mode looping round green red blue white etc Please is there anyway to reset this model as I can't do the things you suggest as there are no buttons on the TV Many thanks Winkie
i love this dude , hes directly to the point instead of bla bla bla nonsense bla bla awesome thanks for this
I have a Sharp Aquos model LC-40LE810UN. It turns on for a few minutes, then shuts off. Is this a power supply issue?
Do you happen to know how to reset Sharp Aquos 55EQ3EA? This model has only one small "joystick" that should also work as a button. My TV is in loop reboot mode after a Sharp issued update and I can't find a way to reset it: TV turns on, Sharp red logo for a few seconds, Google logo animation comes up next then after some time it reboots.
Any help would be really appreciated, thanks.
I have a LC60E69U. Last night my brother pushed a wrong button on his universal remote and changed the input. He couldn't find the regular tv remote so he went to the side of the tv and started trying to change it from there. He hit the menu button and it froze the tv in that mode. Nothing I do will change it. I followed your instructions above for a hard reset but it would not even turn on from there. I am furious figuring I have a huge repair bill coming because of him. Do you have any suggestions for me before I have to put out the money?
I have sharp aquos 2T-C50AE1X. How to hard reset if it has only power button? No channel or volume button or not even input button. And may you have firmware link to my model?
if sharp hd smart tv fuse blew up then also sharp logo comes? Or it won't show the logo screen
I have a SHARP AQUOS QUATTRON LC-52LE925UN and a SHARP HT-SB 600 Sound Bar unit and subwoofer. I use a satellite TV setbox. Everything is connected to the rear of the HT-SB 600 panel. The HDMI out goes to my HDMI ARC input of the TV. Problem is that I cannot control the volume anymore fom my Satellite box remote control as before. Sound is off too (Lip-synch) .. I have tried everything and do not know what to do anymore. Any suggestions? Thanks
Hi, any other suggestions? The image is appearing upside down. I tried the first two options and didn't fix it, and when I try the third resetting option nothing happens, even after holding for over a minute it never starts up with a "K" on the screen.
Sir Thank you for the video. I ahve a Sharp LC-40M5000M-BK not coming on when trying to switch it on. Can you give me a guide?
I just watched so many videos trying to get my picture back and nothing worked thank you so much!!!
I work at a TV rental store doing repairs and we get a lot of our sharps back with bad panels.problems such as dark spots and little bright white etchings.. i had them quit buying the aquas models.. being 60 and 70 inch tvs we were losing a lot of time and money..cool video
good to know, thanks
What if the tv doesn't have button of vol or input, just the power button?
Hello. I have a TV SHARP LC-60LE652E, when connecting the power cable the LED is blue and when operating the remote control flashes red but does not start, I tried resetting with vol - and input but without effect.
OMG...I'm so very glad I found this video. I was going out of my mind for an hour trying to unlock my Sharp Aquos tv's control panel buttons that I'd accidentally locked by pressing the wrong on-screen button! This video saved me$$$..thank you!
I guess my TV is a goner, I woke up and it had no picture but it had sound, I tried holding down channel and and input and held them down while plugging it in and waited with it held down and I lost sound. TV is a Sharp 42 inch 2008. They don't even make parts for it any more.
Any other suggestions before I toss it ( in a lake, Lol)
Please advise/help
I have a sharp tv (32BC5K) and while doing a software update, it failed at 3% and has only showed a blue screen with text saying "an upgrade failed" with the power indicator flashing red and white. It won't let me do anything including turning it off. Whenever I unplug it and plug it back in, it doesn't even stay off as it turns on by itself and shows the same blue screen with flashing power indicator
YOUR THE MAN!!!! Glad i Subscribed. Have an old Sharp LC-19SB15J Your tip on pressing Input & Vol- then plugging it Finally turned it ON, get this I reset it needed but it won't turn on without doing your tip so it stays on i guess its working...
But wasted hours on other internet tips pressing different combinations of Volume & Channel buttons, not 1 mentioned the Input button. Thank you so much & God Bless you! (David G. Yakima, Washington)
Thanks for all the help with the Sharp TV's! I have a 90inch sharp aquos LED and I'm trying to connect it to my LG - XBOOM stereo. But I'm having a bit of trouble. Any advice or suggestions? I've been going through settings and have been trying to figure this out. Any help would be greatly appreciated. Thanks! Keep up the great content.
I have a tcl tv with a black line down the middle of it...could that be the t-con board..thank you
Dont know if you have a solution...but I have a sharp lc37db5u, 05' model I think, and the hdmi port is being weird. It displays my Amazon fire tv. My ps4 won't display at all and my snes classic only has video, no sound. However before I got fire tv the snes classic worked fine. Any correlation between the two or has something else just randomly gone wrong?
Nice vid mate. I have an older model Sharp TV and was thinking about getting into the service menu so I can do a grayscale calibration as these features aren't available via the picture menu as they are on current TV's that I've seen. Do you know if the service menu shows this and how you save and exit from the service menu if you use the 9,9,9,2,2,2 technique?
Hi, I have the SHARP AQUOS LC-70LE640U, I need to know if this TV has mirroring capabilities of its own? Without using the Chromcast?
Even using the Chromcast Ultra I still can't mirror my phone with the TV. It will make the initial connection and the little gray bar shows the initial page and says " connecting " and it doesn't go away. I try to move away from that page but the TV stays frozen with the screen showing the connection.
I can connect with the Chromcast to RUclips but that's all. I'd appreciate any help...
A few questions, If my TV is hardwired to the modem/router, do I still need to update using a USB? We don't have a physical remote and the app doesn't appear to have any functionality, even after setting up the port. We are having problems navigating the menus using the buttons on the TV. We lost the ability to select the options, the volume/channel buttons cycle multiple times in one touch. The volume stops working and it won't turn off unless we unplug it.
Dude! So fast and cut-to-the-chase clear. Thank you!
Hard Reset (Service Menu) worked for me after Sharp Customer Service was no help at all. Thanks!
On my Sharp Roku lc-50lb481c the picture went blank all dark. All I have for buttons is a power & a reset little button no volume or any other buttons to reboot the tv. So is there a way to get around it?
How can we access the menu if we cannot view it because it's a black screen? Have tried plugging out & in to no effect. We do not have an input button on the side, would this be the source button? TV not even 4 years old 😕
Hey man not sure if you can help i have a Aquos Sharp it has a blinking light in the middle don't get a picture tried the 3rd method of reset and it gives me sharp blinks twice and get a black screen any suggestions? Btw i subscribed like your content.
I installed a new video card in my PC and the result what that I would need to unplug the HDMI cable each time I went from TV to PC. As part of trying to fix this, I reset my older Sharp Aquos TV (Sharp Aquos LC52D64U 52-Inch 1080p LCD HDTV) using the on screen menu system. Now, no matter what I do, it won't scale properly and text looks fuzzy. It seems to be overscanning. Any idea how to fix this?
As often happens, I figured out how to fix the problem myself. The TV had reset to default view; I needed to reset it to dot-by-dot and everything was OK. I hope this helps someone who might have a similar issue.
Hello! Mine is an old LC-32GH1. It will not turn on. No power at all. what do you think is the problem?... Thank you!
Many Thanks. The second reset instruction was A-Plus. Now working well. Thanks again.
Hey There, I can get to the menu stage but the TV just turns off and i can't go any further with the steps, and ideas/help why the power keeps turning of?
Hello @tampatec i have Panache P32LJ520HD tv and the panel is locked and I do not have a remote control. How can I reset my TV?
P.S. I cannot find an input button.
Thanks. :)
I have a Sharp LC-52D85UN that won't power on. The power and OPC lights blink 2 times together and then the OPC light flashes 3 times. I pushed the volume up and channel down buttons while plugging in the power and the backlight came on, but I can't get the TV to display anything with the remote. I can power it off and on with the remote and the power button. If I hit the Menu button on either the screen seems to get a bit brighter and the reverse when pressed again. I tried the Input and Volume Down sequence to no avail. Any other ideas as to what could be wrong? It doesn't seem to be the power board, since the backlight came on. Any assistance would be greatly appreciated.
Tampatec I have a sharp 80inch and it has a horizontal line, but it not as a whole line. From one end to the other it bearly getting to one end of the tv. T-con problem????
hey man, my mom's proscan flatscreen TV is a bit messed up. ok so we will have volume and everything, but the picture is fading, and goes in and out, not complete black but will pulse in and out, if you could just reply back if its a simple fix. the warranty already ran out and moms pissed, so I kinda need to try to fix it if it's nothing to serious thank you.
I have a tv that was used as a monitor in a building and is stuck in hdmi 3 can I use as a tv again?
hey there =] i just got a 46 inch sharp aquos tv, the picture is blurry, like it is trying to catch up from some sort of lagg, i only have my xbone connected to it, doesnt matter if its a film or game its like turning ur head to fast, hopefully these tips help :D will let you know
almost all good. When in menu, I switch to ON for reset, but then STILL dont have a enter button to push to MAKE it rest. How do you do THAT?
Bought an LG tv from hotel. Plugged hdmi cable into bell fibe receiver and back of tv-only white snow. Used an lg remote to confirm that input source locks are all off. Only way to use tv is with lg remote, have to change input to HDMI each time then go ahead and use bell remote. I don’t want to use 2 remotes. I only want to use Belk remote. Please help.
I have a sharp TV model LC-43LE653U I tried the 3rd way you explained how to reset the TV, however it does not bring me to the service menu, any advice?
mine didn't bring me to service menu, but it appears to have worked anyway.
i have a 50 lb371u flatscreen. when receiving input from my HDMI the power light is flashing with a red doulbe type pulse sequence.
I was informed it should be solid white light. Can you tell me what is wrong
I tried all 3 and the one someone mentioned in the comments section. And nothing is working for me. Mines is a two person job and I unplugged everything connected to it and still nothing is working for me. Any advice?
hi. i have a sharp aquos lc50ue630x that it gets stuck and alternates between sharp logo and loading symbols. searching for answers on the net, resetting does not work. the next step i need to do is to have the firmware upgrade but i can't find on the net. can you help me?
Hey man... My tv is like seeing triple... Its half way up from the bottom like a jumpy flickering triple effect. I tried resetting it... But its still not normal. It wasnt dropped or damaged. It just stopped working right tonight. Any clue?
There was a strong power surge and my Sharp LC70LE734U went dark. The main board and power supply board have been replaced. The white V at center bottom comes on but will blink 1X then blink 3X quickly and this just repeats itself. What now?
Hey guy when I try to reset holding input vol down panel lights for a second then stops an blinks again but if I hold channel down vol plus plug in tv will run all day not seeing any LEDs out picture is great. Could this be a main board issue thx Ed.note it had a bad led driver board.
LOVE IT!!! worked on my Sharp Aqueos TV, thanks!
Hey, I was wondering if you could help me. My Sharp Tv looks like a CRT display when it's on. I think the pixels themselves are messed up in some way, but I'm not sure. I'd appreciate any advice. Thank you in advance.
How can I do a hard reset on Sharp Led TV Model No: LC-40LE430M ? I've tried holding down (Vol-) + (Input) while powering the TV but it doesn't take me to reset menu but instead asking for password and then display "Input Locked' . Is there any other combination button for that particular model?
Hello can you help me with this.. i have this aquos lc-40le360d3 model, but the remote is not working anymore. I can still navigate the channels using at the back buttons. The usb still works but the problem is when i open the usb, i cant do anything (ex. choose what to play from the usb.) The back buttons can navigate like choose left to right the files in the usb, but i cant play what i choose using those buttons! 😭😭 is there a solution for this?
Try reset, unplug tv power for 1 minute. Next try replacing batteries in remote and check for dirty battery connections in the remote, if you take your phone camera and face it towards the remote then press a button on the TV remote you should see the IR sensor blink on your phone if remote works. You could have a loose connection on the TV ir board or bad main board. Get tv boards at shopjimmy.com or electropartsonline.com
* let us know how you fixed the TV.
Will that work to to other sharp tv model?
Hey man How re you . I have problem with muito Sharp aquos lc 55 4k
It s turn on but nothing happen or show. I couldnt acess service menu. Could you help ?
Bro, I have sharp LC-50UE630X but I don't have Input Button, only Devices and Enter buttons and I tried to press each one of them but I couldn't access to this menu, I there any way for factory reset for my model? please help.
The volume up and input does not work it briefly turns on then off. I can get it to turn on with volume up and channel down buttons, the volume down and channel down says not available. It also has one long flash and one fast flash, any suggestion's?
Followed your instructions on the video. Everything worked up to the last instruction with the green screen. We pulled the plug for 30 seconds and plugged back in, however, only a black screen and a flashing boomerang appears. What should be the next step to get the picture to appear. Thanks.
How do you do a hard 3d reset on a TV with touchscreen buttons? LC60LE810
Hey man thanks for the informative video. I have a sharp aquos 26 which works sometimes and is mostly dead. At random times of the day the little blue boomerang light near the IR blinks inconsistently. It also does this as soon as i plug it in to the wall but totally refuses to respond in any other way. Be in the input vol down buttons the pull out and re enter power cable nothing works with it. Do you have any ideas..? Thanks for any time and advise in advance. Uk, London
I have a 48 inch Sharp Aquos TV and when I tried to turn it on it comes on then it turns off and the ofc light keeps flashing in the front is there any way you might be able to help me out and tell me what that might be
My Aquos Sharp smart TVs keeps turning off and on. Once on I use remote volume and it turns of then on. What could this be? Any assistance is appreciated.
what app did you use for remote
Pushing the Volume - and Source Button while connecting to power and switch on solved the problem. Thank you so much.
Would this work on a sharp aquos lc-40le835u?
Have a LC60e77un. I get to "K". When I press vol down and ch down the menu screen appears for a second and then screen goes blank. The menu screen does not hold so I can not reset. Any ideas? Help. Please.