J's Alarms FO1 Plug & Play Remote Start Install F150 Explorer Edge Fusion F250 Focus Fiesta Flex
HTML-код
- Опубликовано: 25 май 2020
- This will show you how to install our FO1 plug and play remote car starter to your vehicle.
Purchase here:
Explorer: www.ebay.com/itm/123610706658
F150: www.ebay.com/itm/112869459907 Авто/Мото
I was going to send back my alarm system until I watched this tutorial. You made it understandable. It's in and running.
Happy it worked :)
This is the bomb, and wasn't hard to figure out after watching the F150 Video, if you have the 2014 ford fiesta sedan se 4 door everything is on the steering column.
The ignition plug is behind the switch. There's a blue connector that has two push locks, one on top and the other on the bottom, the ignition connector is in it, I used a screwdriver to get the top partially out by pushing down and out, and then the bottom you push the screwdriver down and out and it will come out easily. Don't rush it, it will come out. The other for the VS1 is black and beside it, the programing is just like it says on the instructions I hope this helps you...Stay Blessed!!!
Thank you for letting us know.
@@JsAlarms You're welcome 😊
Worked great on my f150. Had to do the programming a couple times to get the green light, was probly a timing thing. Recommend this
Happy it works :)
just finish install this plug & play remote start in a 2011 F150 with the engine light on and it works great. thanks
Nice work!
Worked great for my 2009 Ford Taurus just make sure to do programming exactly like video with unplugging last 2 wires and starting at that point if you don’t get it programmed on the first try.
Thank you for the purchase and happy it worked.
Will this work with keys that have a separate fob? Our vehicle was matched to this kit but the keys do not have built in fobs 2008 Ford focus
I want to buy it for my explorer 2017 but can I put your system and a fitcamx 500 key at the same obd?
Is there any chance you have this system for a 2009 F-150 ???
What kit do you have for a 2011 f350 diesel. Want to use the factory fob and do the 3x lock
This one here will fit your F350 www.ebay.com/itm/133305442982
How do i program it when there is a push start?
I have one of your remotes how do I set it to no horn honk
If I would unplug the obd2 connected for inspection and plug it back in will I have to reprogram it?
No need to reprogram, just plug back in when your done and it will work.
Hello. Is it possible to program it so that there is no horn sound?
Quiero comprar su equipo para un Mustang 2013 pero tengo una duda.
Una vez instalado sólo se podrá encender a remoto? O también se puede encender normal girando la llave?
Puedes encenderlo y apagarlo desde el control remoto.
I just bought the F01 plug and play remote starter and I would like to know if the OBD2 plug should be connected all the time?
I was wondering the same thing. I have an obd plug I leave in for data collection.
Keep plugged in for remote start to work, can unplug for diagnostics and plug back in when done.
@@JsAlarms I just ordered this kit off eBay for an explorer and was wondering if I unplug the OBD2 If I will need re program it or can it be unplugged and plugged in at any time?
What about a 2014 Ford Edge sel? Does it work with no cutting wires?
Yes no wire cutting please go here: jsalarms.com/online-store/ols/products/246481351-2011-2014-ford-edge-remote-start-plug-and-play-easy-install-diy-3x-lock-fo1
How do I install it on a 2017 ford escape from beginning to end and tools needed?
The 2017 escae will be just like our ford transit video, but will require 3 wires to be connected on the 2017-2018 models
Is check engine light should be cleared before programming? I couldn't get it to work and only 1 light on the module is working when I try to program not 2 as you showed on the video. Please help
Will not work with check engine light on. Please fix before installing.
J's Alarms I’ve cleared the check engine light and tried again but it’s the same problem .
J's Alarms my media player and climate control are unplugged. Should it be plugged in while programming?
Can't program 2nd key no lights flash ? 1st key flash green . Switched both keys in sequence same problem ? 2013 ford edge
Please give our tech support a call.
What about the airbag light? Should it be off for this kit to work?
All lights need to be off for it to work
I got mine hooked up and everything but only have one key do I need two keys to make this work or is one possible
Yes you will need 2 keys to have this work.
Will I be able to program new keys with this installed? I've lost a key AFTER I installed the unit.
No this does not help you program keys.
@@JsAlarms I meant will it interfere with having a new key made once the unit is installed.
Do I have to have the second key? Is it possible to keep it working with only one key?
You have to have 2 keys to do the programing, any locksmith can make you one.
Mines not working on 2012 explorer. Also the air stops working when the obd is plugged in.
Please contact our tech support
Where's the ASCL6 install video that works with J's remote starter FO1???
Yes it will work
Do u need to leave the obd2 port connected forever after this?
Yes you do.
mine was working fine but all of sudden it doesnt want to work and im trying to reset it and repeat but it wont turn green
Just cycle the key on and off 5 times, if done correctly module will flash red twice.
I am not getting the green light after I put the key in and turn it on
Please check that connections snapped in all the way, this is our main reason for lights not turning on.
Will it work if i only have one key?
No you need 2 keys, have another made by the dealer or locksmith
Went thru instructions, it Locked and unlocked, vehicle did not start went to re do steps now it stays green when I do it again doesn’t turn red again, flashes green then nothing no clones
Please give our tech support a call.
I'm at this exact step. F150 locked and unlocked and flashed green. Thought I had it and it only locks the vehicle.
Actually it is working now. I must have been clicking too fast or slow.
Is there an unhonk mode?
Yes please call us and we can tell you to change it
I have a push button start,but it says it works on EBay.
Yes works on both
@JsAlarms but how?
@@ThePimpDaddy it didn't work
Absolutely DOES NOT work for a 2013 Ford Flex. For one the immobilizer plugs are untouchable unless you take the entire dash off, talking hours of work!! Cost a lot less to just get a remote starter installed from a dealer!!! Of course you use the easiest vehicle for this video. Convince me I'm wrong by doing a video on a Ford Flex!!!!!!
We have sold hundreds for the ford flex, we know how to get to the plug easy. Should of called our tech support and would of been working in a couple minutes over the phone. Next flex we get in the shop i will make a video
2011 f350 diesel. If i buy the 3x lock kit from you and in the future delete the DEF system and get tuned. Will it need to jist be programmed again for it to work if?
No worry on the 2011 for the check engine light, our system does not check that so it will still remote start.