(DYI) Doing cold lash on a soild roller camshaft on
HTML-код
- Опубликовано: 15 июл 2023
- We go through our yearly maintenance on our 1971 El Camino super sport, we go thru the cold lash on our soild roller camshaft with Stud girdles, and we take off the 850 holley ultra xp and get ready to make some changes to the jetting and power valve to get the lean stumble out of the car due to a tighter converter change we did when the th 350 got rebuilt, our email address is h1971elcamino@yahoo.com
- Развлечения
Yeah very cool show as much as you can interesting.
Thanks buddy 🙏✌️
Awesome video Herb...people helping people that's the way it should be keep doing what your doing keeping the faith strong 💪
I appreciate that my brother 🙏✌️
Great informative video Herb…It was nice meeting you today at the transmission shop…
Thanks buddy you also 💪✌️
Nice work buddy I'm glad you pointed out to NOT loosen up the gurdle unless you have to adjust the lash and even then barely loose enough to turn the poly lock you wouldn't believe how many times I'd seen people do it with the girdle off or all the sections loose
Yeah only one way to do these right and I try to help people 💪✌️
Looks good Herb. You are a good person to help out your buddy. Keep doing what you do
Thanks my friend 💪✌️
Great video. Great info and tips. Look forward to more on the Elco. Be safe and stay well.
Thanks, will do! Buddy 🙏✌️
That does look like a lot of work but worth every moment. Have a great week, brother.
Thanks we appreciate y’all, hope ya have a good week also 🙏✌️
@@MMCGRACING we love the content, brother.
Good on ya Herb my Brother ! When friends need help there is no hesitation . Always good to have those close friends ( Family to us ) . Great showing on the lash setting also ! Took me two days to learn how to do it from the friend that got me into stock car racing . LOL Gettin' ready to tear up that track and I am ready to watch ya kick butt !! 😎🤘👍🍺🍺🍺
Thanks my brother I appreciate y’all 🙏✌️🍺🍺🍺
Nice job Herb. That job ain’t no fun. Have a good one 👍🏻
But necessary lol 💪✌️
like #21 Oh Boy to be twenty one again. lol Herb nice job of showing the how to's.
Ohh them days , but with our knowledge now eewwweeeee👌✌️
Nice work. Might make a short on how to valvecover gaskets
That would be cool 😎
Good video bud I should have you check my rockers they haven't been touched since you set them
Thanks buddy I appreciate that ✌️
Mr. Bill ,old man Garage in ohio . Mother had seen today vedio bill tell everyone mom pasted away . Be prayers sent put out .
So how the Blazer coming alone ? On Swartz Creek Michigan !! From Flint Michigan Gordon WALKER
Herb i finally bought another hotrod 79 Malibu sbc glide 4 link backhalfed 9inch 456 35spline 28 105 car has run 5.90s in 1/8ths car is on spray
That’s awesome will 👌
Thanks bud. Now saving all my money for the paint
🤘🤘🤘🤘🤘🤘🤘🤘
Thanks pat 💪🤙
I have a kit coming for my 750, have not even taken a bowl off yet. The gaskets are a couple few years old so I want to make sure I have some nice fresh ones before diving in LOL. Look forward to sponging up all the Holley info I can, so I am definitely looking forward to more 👍 Thanks Herb.
Do you use anything on the plate or bowl gasket faces ?
No I just don’t over tighten the bowls, just snug and they usually come back apart pretty good, have any questions hit me up email is in the description ✌️💪
@@MMCGRACING- Awesome ! Thank you 👍
Great Video!
Why are you using two feeler gauges?
One .010, and .002. why not just use A .012? seems like the .002 Feeler is moving on top of the .010.
I use A .013 the next size up, and check it like a no - go gauge. making sure that the .013 does not go in.
Thanks buddy much appreciated I went down to 10 thousand, but my set don’t have a 12 , go figure huh lol i
How do you like your new converter? Mine works great gained alot of street driveabolity and trans temp stays under 150 but the tighter converter kicked it in the nuts more than I thought it would i had to lower my 2 step quite a bit to not push through the brakes and the tighter converter hurt the 60' more than I thought it would but at least I can drive it on the street
I can definitely tell drivability is better, mine seems like it pulls harder to tell the truth, but won’t know anything until we take it to the track 💪✌️🙏
We’re u located in Michigan ….can I pay you to do some work on my 86monte? Love your work💪🏿💪🏿
We are in the bay city area where you located?
@@MMCGRACING Southfield Michigan
I would definitely travel
Shoot me a email and we can exchange numbers, email in the description 💪
@@MMCGRACING ok cool