How to make RFID Door Lock using Arduino | Indian LifeHacker
HTML-код
- Опубликовано: 2 окт 2024
- Here we will make a Smart RFID Door lock by using arduino and ultrasonic sensor.
I hope you guys enjoy learning this project.
Arduino Codes and library: drive.google.c...
Buy Stuff here:
Arduino Uno : buy.flyrobo.in/...
RFID Combo : buy.flyrobo.in/...
Servo : buy.flyrobo.in/...
Male to male jumper wire : buy.flyrobo.in/m2m
Male to female jumper wire : buy.flyrobo.in/m2f
Music by: / ikson
I hope you guys like this video.
Arduino Codes and library: drive.google.com/open?id=1V_U...
Buy Stuff here:
Arduino Uno : buy.flyrobo.in/unosmd
RFID Combo : buy.flyrobo.in/rfidc
Servo : buy.flyrobo.in/sg90
Male to male jumper wire : buy.flyrobo.in/m2m
Male to female jumper wire : buy.flyrobo.in/m2f
Sir I want to your phone number because main Mere Channel ka add aapke channel main Dena Chahta Hoon.
I want to your mobile number please help me
sir app hamsha ardino ka code description me de da karo hme asani hoti hai
Super project
Not in detecting my tag please help
Well its good one!! But what if he forget RFID in his room and door automatically gets lock!! & may be will get another episode of Mr. Bean to watch 😂😂😂 #mrbean
lol bro then we will have to make a project to hack RFID door lock or maybe we could just break a window or might gain access through vents
😂
Everything is fine! Except if someone needs to hold the door for more than 7seconds then it'll cause trouble. You can solve this issue by using a door sensor.
You can increase the time by increasing delay value
i. e. delay(15000) rather than dely(7500)
Thank you Brother 🔥🔥🔥👍
Hi Mr Indian
I have a problem
You put to codes in the discretion
With I will use 1 or 2
Hey everyone, if it isn't working, the problem is with the diagram. The cyan (the rightmost wire) needs to go to 10 not GND. Hope that helps!
Can u tell me where to put the code??
You are a genius, thanks
Legenddd
thank you broo
i'm stuck with that problem and you solved it
Thxx a lot
Awesome bhai aap log or jada video laiye aplogo ka video muje bahot acha lagta hai
To everyone who asks how to add RFID tags:
In the place where you change the UID put || to signify or and paste your other UID. Hope this helps! :)
1:08 what software is used for setting the rfid?
@@dafyourbae Arduino Software
@@dafyourbae Arduino IDE
sir can you please help me i am having trouble in getting the uid tag and the rfid sensor is not detecting the uid tag please help me
i am also getting same promblem
@Jugal Kishore Reddy which channel
Please make more videos on this same rfid sensor
It's not showing the uid tag in serial monitor.
found any solutions? I am facing the same issue currently
pro tip: don't use 9V battery rather use 4x AA 1.5V battery buy a 4x battery holder and connect it to dc barrel jack adapter they easily run servo motor and lasts long. btw mine i first bought 9v battery it didn't run servo motor.
Where to upload the code?
Hii bro one question is there ? if battery is fully discharged and door is locked then how we will open the door.
well just supply 5V from outside to the RFID.. and then it'll work again and open the door
Bhai simple darwaja tod dena 😢😎😎😎😎😎😄😆😆😆😆
Brack the door
As soon as I click on upload code it says MFRC522.h: no such file or directory please help me as I need to submit this as my project
Sir make a separate video to program the board
Hi Mr Indian.
I have tried your project, but it did not run smoothly, and finally I saw an error, the program code did not match the diagram you presented. the pin 10 should be plugged in, but your diagram isn't plugged in. that's the problem.
Sir where is the SS_pin that is defined as pin 10?
Is SS_pin in the card sensor or servo?
bhai yeh erorr a rahi he Arduino: 1.8.13 (Windows 10), Board: "Arduino Mega or Mega 2560, ATmega2560 (Mega 2560)"
code:2:10: fatal error: MFRC522.h: No such file or directory
#include
^~~~~~~~~~~
compilation terminated.
exit status 1
MFRC522.h: No such file or directory
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
Arduino:1.8.10 (Windows 10), Płytka:"Arduino/Genuino Uno"
sketch_feb02c:5:10: error: MFRC522.h: No such file or directory
#include
^~~~~~~~~~~
compilation terminated.
exit status 1
MFRC522.h: No such file or directory
Ten raport powinien zawierać więcej informacji jeśli w
File -> Preferencje zostanie włączona opcja "Pokaż
szczegółowe informacje podczas kompilacji"
how to fix it
The given diagram is wrong...connect SDA pin of rfid module to pin 10 of Arduino Board and not to the GND
दिया गया diagram गलत है ... RFID module के SDA पिन को Arduino बोर्ड के 10 पिन पर कनेक्ट करें और GND पर नहीं
bro i am not getting my rfid number pls help
ASAP
1st Step: Install Arduino Software in your PC
2nd Step: Make connections Ard, RFID and Servo motor According to Vedio not from circuit diagram.
3rd Step: Download Liberary of Servo Motor and RC522 from description link and Add it into Ard software.
4th Step: Copy Program Code from Link and past it into your Ard software compile than upload.
5th Step: Open serial Monitor copy Rfid chip code and past it into your program.
Again upload.
Then your Project defiantly work...
Any Query regarding this I am here for you!
Thank You Bhai Allah Hafiz!
Hello bhai ek help chahiye thi
@@Abdul6_9 Han btaye
I made the same circuit connection and copy paste the code but it showing error. Why
Bhai I need help
@@yashsharma4248 Yes Bro Tell me how may I help you!
Bhai MFRC522.h: me error aa raha h
Did you find a solution for this problem ??
vo ek liobrary hai install it from libraray manager
i know how to fix it. It was for me as well
@@ahmedgenius9208 how?
Super. It is very useful
plz help me sir
Hii i am suvendu this project is very helpful and I am made this project for school
What if battery dies in the locked position? How can we add a failsafe.
Firmware Version: 0x0 = (unknown)
WARNING: Communication failure, is the MFRC522 properly connected?
Scan PICC to see UID, SAK, type, and data blocks...
i am getting the above problem can u solve it?plss!
MFRC522 is Not Working Bro : No such File or Directory . What Should We Do?
download the dictartory file from github of mfrc522 and add zip library in ardiuno IDE and then check
Okay what if the battery goes out what will you do ???? Congratulations you just locked yourself 😂
Haa bhai baat to barabar hai
you use angle 180 degree or 360 degree?
Mine was not reading the cards dont know which one has the defect. sad
Men will open with hand
For some reason when i scan the card nothing happens but when i use another code to test if it is faulty or not, everything works perfectly. can you please recheck the code and update it for 2020, i have all the libraries installed but still no fix
me too same
Hello I’ve been having trouble too can you please send me the code you made??
If I push the reset button , then the door open but the RFID will working stop
I have to send the code again??????
Plz
Other purchased cards are not support or shows by rfid sensor. It only shows the value of particular card and key ring .
What to do???
it won't read my card help I need it asap thanks
how to use or open arduino seirial monitor.please fully boolna
Bro SDA should be connected to Digital 10 pin. I wasted my 1hrs in debugging. Thanks!
Alert!
0:45
Wrong Diagram!
See carefully in the video.
then what's the right diagram?
Where true diagram
When i put my id it did not show anything in serial monitor
Bhai ultrasonic Pathfinder with servo motor robot k upar vedio banaiye next topic par please
Bhai MFRC522 mai error aa raha hai. Ur not replying to anyone plz reply is if u know the solution 🤨
Go to Sketch - Include libraries - Library Manager and find MRFC522 and install it
@@sameerkengg its not MRFC522 its MFRC522
What if , someone takes the wire out from the RFID scanner.?
can you please tell me what to do when my rfid is not reading my card
my one doesnt work even if I connect the right wire to d10. i have checked all the wirings but idk why it doesnt works. plz help me
Bhai meri serial monitor use nahi ho rahi ha
can it be connected to database in simulation part? please help me sir
it is not showing uid code
Same here
Please make a video using raspberry Pi 3
I MADE THE PROJECT BY FOLLOWING ALL YOUR STEPS AND UPLOADED THE CODE SUCCESSFULLY BUT I DONT KNOW WHY MY RFID IS NOT READING MY CODE .PLEASE HELP ME WITH IT
not working with 9 volt battery but works with cable. please help!
where could I buy the same rfid in europe?
Please give Sir Ardino app.
Sir,when i connect it to my computer it works properly but when i connect it with battery it dosent work properly it doesnt scan the card plz plz help me sir because science exibition is in 3 days plz help me out
I try this at school, but doesnt work...
I open the serial monitor, When i stick the tag to the rfid, but doesnt appear.. please help me, this project doesnt working
SAME WITH ME
Super you guys are amazing.Hey one request as a subscriber,please make a video, how to increase range of a rc transmiter(flysky i6/Radiolink AT-10) with rc signal booster...please please make a video on in his topic...soon please
Sir g mera tag hi scan nhi ho pa raha hai PL help?
Circuit diagram is wrong.
SDA pin -> arduino pin 10
Cool job 🙈
sir aap jis website ka link dete hai ky wo
trustable hai ky hum waha se manga sakte hai kuch bhi
Bro can u please make video about how can we add 3 or 4 RFID tags and if we goes out by opening door through reset switch nd if door not fully close and Adriano can't lock the door then what happened?
Sir yek video mini CNC machine ka bhi upload kr do please sir
Card asses nahi hoo raha
The software which is used in RFID coding is thonny pig
Bruh this isn't good, you cant even get the uid if u place the chip next to the scanner
Hello sir thanks for this great video, it is very informative.👍
But like if the RFID module is located outside the door then there is a chance that koi usee hi le jye or hum bhi bahar hi fus jyen 😆. Then I researched a lot and I come to know that a module pn532 can work from 7 to 8 cm distance also, it is a RFID and NFC enabled module for Arduino.
By using it we can place it on other side of the door and it can also unlock by mobile it it is a NFC enabled one.
But I don't know how to use it please make a video on it 🙏
can i have the source code? cause your google drive is 404 error
What if battery dies
The cyan wire should be connected to 10 not gnd
my all connections are ok but reader is not reading tag!!!
Dhruv, can you please tell how can it be improvised so that together with a door lock it can be used as something else
what happens if the battery loses its energy? door stuck?
yes. thats why you need adapter
Wow I will make this stick it my door varsha khabiya beta
Sir my RFID is not detect the card
me2
Sir how to add more than one rfid tag?
Like the same rfid combo but more rfid tags ? Requesting you to help me
i also need same answer. if we are using this at office. how to add many UID Codes
Everything is good but autolocking after 7 second this ia not neaserry
Hii can you send proper diagram please
Nice 👍
Sir ...Maine apke pixhawk dekh kar same drone banaya hai...plz PR jab. Mai use uda raga hu...vo stable bilkul nai hai....aur...properly ud nai raha...tho mai kya karu
Sir do we have to add the board ,or any library in that program .
yes click ctrl+shift+l then type or search mfrc522 then click install .that is it the work is done
@@thannoliv9178 do we need not need to install Arduino Uno
@@thannoliv9178 you saved me thank you soooooo much
Please tell that how can we send an email alert when the door is unlocked in the same project
kyu thaka raha hai bechare ko
Very good 👍
seen after a long time
Please Can you show me the code
how to make it non clonable?
i put all corrctly but my RFID lock just work one time
Bhai agar mrreko aur RFID code add karne hoga to code mai changes kya hoga 🙂
You can use "||" function between two code. "UID1" || "UID2" where || is stands for OR function.
Thank you bhai 🥰😘
@@IndianLifeHacker CHIP ALAG SE MIL JAEGA
@@IndianLifeHacker ?
@@ashutosshguptaa6697
Aap ka code kaam kar raha h kaya ??
Arduino: 1.8.13 (Windows Store 1.8.42.0) (Windows 10), Board: "Arduino Uno"
sketch_oct30a:2:10: fatal error: MFRC522.h: No such file or directory
#include
^~~~~~~~~~~
compilation terminated.
exit status 1
MFRC522.h: No such file or directory
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
can you help me it is showing this ,when i click upload
its not reading the cards
bro how to add a uid tag pls answer
sir kitne log is m regestor ho saktay han
or agar m is relay 12 volt lugani o to m kasaise connect krun
Sir it is not showing password after taking near the sensor. It is not showing anything
I did everything u did an downloaded everything an still it does nothing at all it just blinks at me an won’t upload how do I fix the error code for the mfrc522.> it’s not orange like orthers to
There is nothing problem in scan but problem while uploading in ardino
Give me some suggestions 🙏🙏🙏🙏
sir make writting machine
how can i use many cards for once door
plz ...help
Yes bro
same here
not familiar with this programing language but most probably put all the codes in an array and search it
brother please make a bi copter
There is problem in coding
sir mare programing hogi ha par serial moniter ma rfid moudul decting nahi ho rae
Bhai, I made the RFID door lock. Even after the code has uploaded successfully, the RFID module doesn't show the UID tag even after bringing the card close to the module. Please can you help me.
I've also faced this problem. serial monitor is not showing any UID tag number even after bringing the card closer to the module....
after some tries i have solved this problem. just connect the sda pin of RFID to the pin number 10 of arduino. thats all
Badrul Amin, could you please help me. It is still not generating the RFID number.
@@ashishdhruv i think you didn't properly connect all the pins.. please connect all pins correctly...
Bro I ain't a noob and plus I crosschecked all the connections .