Hi Lim, so you mentioned 13 pro & pro max. So is the issue not so common in the base model iphone 13? Does it has something to do with the 120hz refresh rate on the pro models? Thanks!
a year past i’ve got this same issue to my iphone 13 pro max. its resolved because it is in warranty but apple needs to address this issue and try to solve it even the device’s warranty has ended.
just wanted to comment. I had this repair done for my SO's iphone13pro. and initially it still flickered, however we brought back the the hospital that did the repair, they redo it again, and it has been 6 months and still going strong. TQVM, Apple--- if you are reading this, pls adopt this type of repair, that is being enviromentally sustainable. Just chucking the whole thing out is not the right way to treat Electronic waste.
Hi sir, can I ask if you just solder the copper wire or u have to apply something on the copper (tinning)? Adding on, I dont have iPhone 6, thinking to just buy some thick/thin film resistor. Will it work? Appreciate the help in advance!
Hi, less than a month ago I send my phone for a repair and the same method is used to fix the green screen issue. Now, my phone has a slight dark green flickering screen. It is still under warranty. My question is - will I have to replaced a new screen or can it still be repaired?
the local service repairman did this to my phone and it worked but now i have a problem, after repairing the phone using this method o wire jumping, my iphone camera and flashlight won't work, only part that works is the 3x to 15x zoom and front cam. Can u help with this?
Sory i wanna ask...if we already do a jumper on any iphone get white screen & when we update the lastest ios, is it will be the same thing like green screen or anything??
@@iPhoneServiceMalaysia before i forget, while our iphone 13 series which already do a jumper on it...if we keep using 120hz , is it ok for a long time sir?
@@iPhoneServiceMalaysia before i forget, while our iphone 13 series which already do a jumper on it...if we keep using 120hz , is it ok for a long time sir?
Nope. I actually experienced this issue myself just a couple of days ago. I'm from South America, the western region, of course. I would venture to say that it's particularly uncommon in North America and Europe. Many other users I know from here have also encountered this issue.
@@iPhoneServiceMalaysia Hi ! The same problem has just occurred on my 14PM which is 1 and a half years old. Green screen then definitely white with a few lines. I hope that the after-sales service will provide a solution. My 6s and 8 still work well ...
“I have a 13 Pro. I heard from many people that after updating the iPhone, the screen turns green. So, I didn’t update it after iOS 16. However, even without updating, my screen turned green. I got it fixed by installing a jumper. Now, can I update my phone? Updating won’t cause the screen to turn green again, right?”
I have my iPhone 13 Pro like this, (screen yellow) I don't have a 100K SMD resistor here, but I do have the blue metal one. I hope I can do it... If it works I'll come back here
Just to jump it and it will still work. Without the resistor, it just has a higher risk of damaging the source, especially if the owner drops the phone hard.
You are probably the best I have seen on RUclips
Sir , plz make a video 14 series . Same problem on 14pro and pro max
Hi Lim, so you mentioned 13 pro & pro max. So is the issue not so common in the base model iphone 13? Does it has something to do with the 120hz refresh rate on the pro models? Thanks!
Yes it does. We made a video on affected devices.
a year past i’ve got this same issue to my iphone 13 pro max. its resolved because it is in warranty but apple needs to address this issue and try to solve it even the device’s warranty has ended.
The problem will still coming even though they replace the new one, trust me that is the main reason I let go my 13pm.
Heh did you update developer version or beta version except public version ?or any other issue ?
Thank you for sharing.
Far the best teacher and technician. Please keep sharing!
After this jumper thing ,can we update it to newer version ?..
Because after this also I’m getting screen flickerings
Yes you can. So far I found update iOS is not related at all.
@@iPhoneServiceMalaysia but I’m getting some screen flickering after this jumper service
@@akalathandaziya8242 just remeasure the dot to see how many volt
@@iPhoneServiceMalaysia ok boss
@@iPhoneServiceMalaysia Sir,will it work for lines too?
Where is it possible to buy the sphigmomanometer that you use to test leaks on this video?
just wanted to comment. I had this repair done for my SO's iphone13pro. and initially it still flickered, however we brought back the the hospital that did the repair, they redo it again, and it has been 6 months and still going strong. TQVM, Apple--- if you are reading this, pls adopt this type of repair, that is being enviromentally sustainable. Just chucking the whole thing out is not the right way to treat Electronic waste.
Some 14PM are getting the same issue. Nice video boss
Hi sir, can I ask if you just solder the copper wire or u have to apply something on the copper (tinning)? Adding on, I dont have iPhone 6, thinking to just buy some thick/thin film resistor. Will it work? Appreciate the help in advance!
Hi what kind of tools that are you using for test water resistant? And where can i get it? (Based from Malaysia too btw)
sir my 13 pro is suffering from same condition after updating 16.6 it's whole screen turns in a Yellow or a green colour what should I do
Samee
Wow king repair is back
I have a 13 just with this problem, I don't know where to make the jumpers! could you give me help?
And is the line that is lost a 1.8v power supply?
Do you think it’s a display concern for black screen that won’t work with charging and won’t force open?
what method is the best for the long-term? lighter or jumper with resistor
Not working for me , is there any other solution to fix the screen ?
Thanks for your video! Question, is similar fix method can be applied ipad mini6? I have WSD one and hard reset factory reset didnt help it.
Mini 6 is a lcd screen, not oled. They don’t work the same.
Thank you very much for your answer!
Which pin will be for green screen?
Hi, less than a month ago I send my phone for a repair and the same method is used to fix the green screen issue. Now, my phone has a slight dark green flickering screen.
It is still under warranty. My question is - will I have to replaced a new screen or can it still be repaired?
the local service repairman did this to my phone and it worked but now i have a problem, after repairing the phone using this method o wire jumping, my iphone camera and flashlight won't work, only part that works is the 3x to 15x zoom and front cam. Can u help with this?
I wonder if you can use 0201 smd resistor instead of 01005 , different voltage though
Sory i wanna ask...if we already do a jumper on any iphone get white screen & when we update the lastest ios, is it will be the same thing like green screen or anything??
No. So far we update iOS it’s still working. Any issue we just measure which dot is the problem and the fix accordingly.
@@iPhoneServiceMalaysia before i forget, while our iphone 13 series which already do a jumper on it...if we keep using 120hz , is it ok for a long time sir?
@@iPhoneServiceMalaysia before i forget, while our iphone 13 series which already do a jumper on it...if we keep using 120hz , is it ok for a long time sir?
Thank you so much well comprehensive
How about for that of 14 pro max
Hi - Is there a fix to an NFC that stop working? (On iPhone 8 Plus)
i have place 58k resistor (bigger one not from iphone 6 but local one that is used in charger) doesn't work.
Hi Sir, after jumper is being performed. Will the white/green screen happen again?
So far 95% okay.
Hi sir, what is the size of your copper jumper? 0.02mm?
Awesome my master. Always on top ❤
Habe die gleichen Symptome von einem iphone 14 pro max kann ich aber nicht anwenden oder weil bis jetzt gibt es für die 14 Serie kein Video
Thank you sir for always explaining in an easy and fun way!
iPhone 14 promax green screen problem, please jump solution sir🙏🙏🙏
The exact same thing just happened to my wife's iphone 12. Would the repair be the same?
iPhone 12 is not the same. Normally need to replace the screen.
sir iphone 11pro desply bug fix plz solution plz
What's the success rate post repair for iphone 13 green screen ??
13pro 99%. 13pro max 98%
@@iPhoneServiceMalaysia My question aims for iphone 13 only, not for pro and pro max. Please respond !!
I already repair my iPhone 13 Pro at spr. Should I sell it out ? The problem will keep repeating ?
A same problem shouldn’t reoccur if applied solution properly.
What is the resistant of the resistor?
qual a espessura desse fio de cobre esmaltado ?
Will this fix reduce display brightness?
not at all
How to fix to half green display iPhone 13 pro. please help me sir..
Hi!
ive noticed that this issue is not noticied in the western region of the world
just in the south east and south asian countries
is that true?
Nope. I actually experienced this issue myself just a couple of days ago. I'm from South America, the western region, of course.
I would venture to say that it's particularly uncommon in North America and Europe. Many other users I know from here have also encountered this issue.
U did a great job a appreciate that does the same jumper works for iphone 14pm
Waiting for a real case from 14 series
@@iPhoneServiceMalaysia Hi ! The same problem has just occurred on my 14PM which is 1 and a half years old. Green screen then definitely white with a few lines. I hope that the after-sales service will provide a solution.
My 6s and 8 still work well ...
saludos procesor puede pasarme los pack exactor donde van el jumper
How much for 1 screen service usually,?
how to do it on iphone 14 pro? i have 8 pins and not 6
Is there any possibility of it happening again after repairs🤦
Does this not return the same error?
should we update upcoming ios updates or not after fixing this issue with jumper? is there any consequence? please replyy
most of the cases no need jumper. it's okay until now even updated new iOS
for iphone 13 same counting?
What about 13 mini? Thanks for your video bro!
It looks like the 14pro/pro max also had similar issues, may i know have you happened to repair them with this method so far?
I don't get any 14pro or pro max screen yet. Waiting someone to send me and I check
@@iPhoneServiceMalaysia sir what about just iphone 14 ? simple iphone 14 ?can we repair using this method?
Bos, berapa suhu solder yang sesuai nak jumper tu?
300c bawah
Hi !!! 14 Pro Max plsss !!! Thx
Thank You Sir... It's Trick's Works In 13 Pro 🙌🏻✨
Thanks sir you are awesome man❤❤❤
What size the jumper wire?
Any chance to happen again after resolving this problem?
usually 9 out of 10 they're ok.
Can you share iphone 14 pro max point sir?
Thanks bro, u saved me! New sub
My phone has jumper fix but after 8 months it's white screen now, is it still fixable?
Possible. Still need do a proper check which dot is the issue.
in my case, 13 Pro Max, using resistor not working, i've been using 100k and 50k of resistor , and not working all
What if i drop the phone ??
If the source of the jumper is peeled, Is there another source?
The trace is still there for sure. You lost the dot and the coming trace is still there.
What the cause all of this even iPhone 14 promax🤦♂️every time new update
Can i get resistor any iphone instead iphone 6?
Sure
Please how can I join your class😢😢
how much do you charge to do this
What of if you missed the target
solid master! love it!
Thank you sir , I’m from Bangladesh 🇧🇩
If repaired like this will it come again?
So far I have fixed 50 devices this issue until today. Only 2 retuned with permanently short and couldn’t fix again.
@@iPhoneServiceMalaysia if it cannot be fixed by you, is there no chance for the phone to be fixed even by the official store repairman?
Bro 14 pro max green lcd solution?
It's working without resistor but when I put the resistor it again becomes white
hi sir, I tried doing this and now for whatever reason my phone screen become pitch black, not even white screen anymore :'( help
New video has explained
Thank you for sharing man!
It is still showing White Screen 😭
Then it is physical damage case
“I have a 13 Pro. I heard from many people that after updating the iPhone, the screen turns green. So, I didn’t update it after iOS 16. However, even without updating, my screen turned green. I got it fixed by installing a jumper. Now, can I update my phone? Updating won’t cause the screen to turn green again, right?”
Not working this process
Awesome video
what about 14 pro max screen?
we launched soft oled screen for iphone 13 pro max etc
Yes I updated to iOS 17 beta 4 and it went crazy yellow and green never dropped never 💦
Если телефон был вводе и после этого стал белым, он заработает если я сделаю что и автор ролика ?
I have my iPhone 13 Pro like this, (screen yellow) I don't have a 100K SMD resistor here, but I do have the blue metal one. I hope I can do it... If it works I'll come back here
Just to jump it and it will still work. Without the resistor, it just has a higher risk of damaging the source, especially if the owner drops the phone hard.
Thanks for your kindly explanation.
thansk so much this help a lot
This video really helpful and good explain
Thank you for sharing Master Lim
Thank you master lim🎉❤
Great sir!!
Thanks it’s work pin 7 from both side worked 🎉
Even iPhone 14 Peomax same issue green screen😪
Thankyou❤❤❤❤❤
Will you lose the 120hz with this fix?
No
Sir how can i enroll in your class?
www.iphone-repair.my/sale/online-course-iphone-logic-board-repair/
Iphone 13 green screen what to do
great explanation
Please how can I join your class
www.iphone-repair.my
love you man
Good 👍🏻 job ❤❤❤❤❤