How to Install DS-KIS202T - 4-Wire Kits Hikvision Video Door Phone System

To install the Hikvision DS-KIS202T 4-Wire Video Door Phone System, you can follow these general steps:
1. Mount the outdoor unit: Install the outdoor unit (doorbell camera) at the desired location near your front door. Make sure it is securely mounted and protected from the elements.
2. Connect the wires: Connect the wires from the outdoor unit to the indoor unit using the provided cables. Follow the wiring diagram in the installation manual to ensure proper connections.
3. Mount the indoor unit: Install the indoor unit (monitor) inside your home at a convenient location. Connect it to power and make sure it is securely mounted.
4. Power on the system: Power on both the outdoor and indoor units to test the system. Follow the setup instructions in the user manual to configure the system settings.
5. Test the system: Test the video and audio communication between the outdoor and indoor units to ensure they are working properly. Adjust any settings as needed.
6. Secure any loose wires: Make sure all wires are properly secured and protected to prevent damage or interference with the system's operation.
Please refer to the specific installation manual provided by Hikvision for detailed instructions and guidelines for installing the DS-KIS202T 4-Wire Video Door Phone System. #elktroz #automation #vdp #vantage #facebook #gateautomation

[@manosmanos5726]

The wire can be more than 25 meters?

[@elktroz]

You can use wire Upto 45 meter