2007 - 2011 Toyota Camry Backup Camera Install
HTML-код
- Опубликовано: 21 мар 2022
- Parts used listed in the description below!
Watch a full tutorial as a 2007 Toyota Camry will have a backup camera installed to an existing double din touch screen radio. This camera will be installed at the license plate and will provide additional safety features when reversing.
This video applies to Toyota Camry models for years 2007, 2008, 2009, 2010, and 2011. This video also includes complete camera wiring and assembly, installation, and testing.
For a great how to video on car backup cameras, click here:
• Car Backup Cameras Exp...
Click here for the radio install video:
• 2007 - 2011 Toyota Cam...
Click here for the front speaker install video:
• 2007 - 2011 Toyota Cam...
Click here for the rear speaker install video:
• 2007 - 2011 Toyota Cam...
Click here for the amp / sub install video:
• 2007 - 2011 Toyota Cam...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Recommended Backup Camera (Amazon Associate Paid Links):
*Natika Backup Camera: amzn.to/3csfJn3
Radio Parts used in this install (Amazon Associate Paid Links):
*Dual DCPA701 Double Din Radio: amzn.to/3jzm2cF
*Metra 95-8218S Double Din Dash Kit: amzn.to/34qhvEV
*Crux SWRTY-61J Wiring Harness (Retains JBL): amzn.to/2T1yw2m
--If you don't have the JBL factory system, use the SWRTY-61S harness: amzn.to/3iqHcK7
*(Optional) USB/USB adapter: amzn.to/2URnTA0
*(Optional) RCA to 3.5mm Jack Adapter: amzn.to/3wakBW4
Disclosure: As an Amazon Associate I earn from qualifying purchases 
Авто/Мото
Parts used linked in the description of the video!
I referenced your video numerous times on my install, I used posi taps for the break light, those were super helpful
Just bought a backup camera for my 2011 Camry a week ago and have a heck of a time trying to figure it out, I’ve been back and forth on RUclips and I’m very glad I came across this video. It’s helped me immensely and it’s much appreciated!
Does it work as the original? So it turns on only when in reverse?
I think there should be a better view and step by step process on the drilling of the hole and putting grommet
Yeah, couldn't see exactly where they drilled or what the camera looked like after installation.
Man that is clean and looks very oem. Nice work!
by far one of the nicest installations given how accessible those tail lights are
Crutchfield should pay you a fee....... Really well done video on the camera install, as well as the radio video. Saving me numerous hours. Thank you!
Thanks so much this helped me really well installing back up camera, instead of soldering the cable what I did is splice the wire long, put it in the bulb socket and put the bulb on top of it and it works😁
Also I didn't drill the hole, just loosen taillight bulb, feed the wire and close it back in.
U made it look too easy. Great work. And thanks for sharing.
Omg i did everything so thank you except when wiring into the backup lights the wires were crossed i didnt catch it cuz my multimeter was saying -12 and i didnt pay attention to the negative haha i got it now gonna finish this up ! Thank you tho watching this inspired me that i could do this on my own and im halfway done now !
Can you provide the part number for the grommet you used? Thank you.
what was the crux black box behind the radio
I have a 2009 Toyota Camry and we've tried to radios now and none of them. Please help us. :-)
Anyone know why my ground wire connected to the tail light burned?
I need this now…
Yes you do. We linked everything in the description of the video
Subscribed!
Great video! I'm about to install a camera in to a Toyota so very helpful.
Just one question, I note that you connected the camera earth to the reverse light earth which makes sense. The instructions for my camera state to earth the camera to the car's body and not to the reverse light earth. What's the difference?
There isn't any, and they just state that because some vehicles would have a switchable ground vs a constant ground depending on the year make and model. Some reverse lights and vehicles have variable voltage. For this Camry, doing what we did will be just fine.
So on my boss radio wiring harness , I have a lime green reverse wire , have a reverse output wire , and a reverse input wire.
Kinda confused on what to wire and where to wire .
Ground your parking brake wire, reverse in is your trigger wire that needs to be connected to the reverse light positive wire, and reverse camera power output is optional to power the camera at the radio.
everything else done except 2 hours pushing dang emblem and still can't get it off...ready to either rip it, melt it, or take 1' drill bit to it....why do no videos explain how to get it off?
At the same fu**king problem, none of these morons tried to explain how they did it.
Emblem? Is it in the way or ? I'm getting my camera delivered today I plan on doing this but I guess I need to check it out did you get it? What did you do please
It’s not the emblem but the clip that holds it together. I just ended up breaking it off lol
@owenjackson877 I got my camera installed, the clip is like everything else in the care basically have to kind of pinch it the right way and it comes out, it was funny I bought the camera he recommended and cross the wires so I thought they sent me a defective one but the multimeter had a negative sign on it haha bought a different camera it's better anyways but got it done. All I have to do is tune my amp then start on dsp
what camera did you buy?
That rear panel with logo is hard to remove I can't get white plastic tab lose!
The exact same problems, I wish they were clear about that
@anilvadathya1681 what did you end doing?
I can't figure out how to get the big center clip behind the emblem to release. You didn't show this detail.
Same issue
Anybody get this piece of trash off yet?
Same annoying issue
Staring at this rn someone help!!
I don't get any signal when in reverse. I've connected the red wire at the head unit to where it says reverse cam input but on the rear trunk end I'm not sure where to connect the other red wire to as the Amazon cam i have comes with instructions that are useless.
The rear cam is connected to the + and - of the reverse lights but the rear rca red wire is still not connected.
Do i connect to the reverse + trigger as well or??
I mean the head unit needs a trigger to switch it to reverse cam so it has to go somewhere.
It's a 2007 toyota camry by the way, thanks!
ruclips.net/video/rHORKUqlEM4/видео.html
Have you installed the amplifier yet? Waiting for that video if you still plan on uploading it.
Video will drop in a few days! All edited.
Don’t see the links to the product
Hey brother, really need ur help…2011 Camry with kenwood DMX4707s and kenwood Cmos 230, i followed the directions and tied the hot into the acc wire and grounded to the chasis, i then ran a 18g wire from the backup lamps to the purple and white wire wire hanging off the top right corner of the HU. I can manually select the camera and it works but will not activate when the car is placed in reverse, is this setup wrong or should i just go with a different cam, thanks
Send me a message on Facebook or instagram and we can help.
Hey man, appreciate the response…found out the problem, grabbed a multimeter and inserted into the backup lamp bulb socket and the polarity? was backwards…not sure why but instead of tapping the hot into the red/black i had to tap into the white/black
Hi, can you include the grommet you used after you drilled the hole? It is not included in the parts list in the description. T.I.A.
amzn.to/45SOITh
How big of a hole do we have to drill to get the wire from camera through it? What did you use to cover it up?
grommet
I have been look all over RUclips on how to remove that same plastic piece without breaking it and have yet to find anything showing it. I ended up breaking it to get that piece off, not sure how I am going to secure it in place now. Wished there was more details on how to do it without breaking it.😢
@@jakeperez1871there’s like a white Clip on the left to pick thru but he doesn’t explain any of that
About how much was all of this? I have a 2010 Camry and would like to get this done.
All linked in the description of the video. Labor varies depending on the shop you choose (unless you do it yourself)
I'm getting no signal when I go into reverse.... Not sure what happened
Either the camera is not getting power, bad camera, or a cable isn't connected correctly somewhere. Check your connections, check, to make sure you plugged the camera into the correct port on the radio.
Where do you put the camara. You didn’t show on the video
License plate camera, uses the studs on the plate. Linked in the description!
Where do I get a grommet?
I went to lowes I picked up about 3 different ones to see what would work . Everything looked good but I can't get a picture. Man this would be my luck