Wooden Flag Design and Toolpath Tutorial - Carveco Maker
HTML-код
- Опубликовано: 23 янв 2025
- In this Carveco Maker tutorial, we'll be designing a flag by combining vectors. I'll also cover how to set up the v carve and pocketing toolpaths, and talk about a few tips to reduce design time and keep everything organized.
If you want to try this program out for yourself, follow this affiliate link, and use the code CHRISPOWELL to save 5%.
Affiliate link - store-us.carve...
Did you make one of these after watching this tutorial? If so, I'd love to see it! Please tag me on Instagram @full_steam_designs and Facebook @Full Steam Designs
/ fullsteamdesigns
/ full_steam_designs
fullsteamdesig...
If you enjoy my content and would like to show your support on a more personal level, please consider checking me out on Patreon. Thank you!
/ fullsteamdesigns
Not sure if I commented already.Thank you!.This is the best way of explaining this I have seen.Everybody else drift off in some nonsense that dont make any sense.Very well done.I think I will be able to get something like this done now.
Glad it helped. Thanks!
This is the video I've been waiting for! Thank you!
I probably should have made this one a long time ago. Thanks.
Thanks for the tutorial Your very good at teaching. Much better then the Carveco made videos. Your easier to understand
Thank you
Thanks Chris! I appreciate all your tutorials. Particularly the Carveco ones!
Thanks for watching. I appreciate it.
This is a good video. Thank you for taking the time to teach.
This is exactly what I needed to know. Thank you for posting it!
Thanks for watching!
love your work Chris.
Thank you
Very helpful, thanks
Thank you. Incredibly helpful!
Awesome video, maybe a part 2 showing the paint/ stain side of it. Thanks for all the help.
I have an older video on it, but it probably wouldn’t hurt to do a new one. ruclips.net/video/Yf-ZMGDFimg/видео.html
another great video, very clear instructions and easy to follow as usual.
Thanks!
Great stuff Chris! I picked up some new tricks from this one
Thank you sir
Glad to hear it. Thanks!
Very informative video Chris. Thanks for sharing your knowledge with us.
Thank you.
Very good video. Thank you.
Quick question: If I wanted the corners of the stripes to be sharper how would I go about doing that?
awesome video as usual chris. just a helpful tip you can also right click and it will bring up the merge and subtract either way works
Thanks. I need to make a hot key for it.
@@ChrisPowellFSD yeah i was just designing some flags for an upcoming craft show and saw ur video im like ur always one step ahead of me lol
Hey Chris can you do a short video on how to pull an image from google I.e. the marine corps eagle globe and anchor or something like it and inset it into the flag using Carveco maker
Yea I can see about doing something like that. The process would be similar to this for getting the image. ruclips.net/video/eleXRjASQ8I/видео.html
Hello Chris I just enjoy your videos I started the fire department flag in Carveco. My problem is trying to take the stripes out of the logo, I go to vector and all I get is is weld and explode no subtract comes up at all. Trident quite a few times it just doesn't work if you can help I would appreciate it thank you
Thanks you sir
Thank you
Can you do a video on how to design flag for a ortur laser master 2. I'm a newbie at lasering. But bought the laser to do some flags instead of dremeling!!
What program are you using? Lightburn?
@@ChrisPowellFSD yes. I'm just learning that as well
I’ll see what I can come up with.
@@ChrisPowellFSD ty Chris, appreciate it
How do I change the work area size after I import a vector design? Thanks
Hey Chris went to calculate the fire logo and it says vector intersections were found in the selection and to correct in vector doctor. Not sure what I need to do or if you can do a video explaining Vector Doctor
Carved I had a few available. ruclips.net/video/oWkSmvcyqIA/видео.html
Great video Chris! I didn't catch how deep you cut your stars. What do you recommend? Thank you!
I don’t set a max depth on them. I make sure that option is disabled. I talk about it at the beginning of the toolpath section.
This was a great video! Mind posting a link on the shapeoko you use? This is something I've been wanting to get into for a while now
Thanks. Mines a pretty modified Shapeoko 3. They don’t make it anymore. Now they have the 4 and Pro.
@@ChrisPowellFSD with the shapeoko 4 pro, it has the option for a hybrid table, I'm guessing that's optional? Pros and cons of a table and no table?
I think that’s sort of like the t track I use on mine. I think it’s a good option.
@@ChrisPowellFSD thank you so much for the help/guidance. I ordered the Shapeoko pro today! Anyway to get your contact info, I feel I'm gonna need it in the near future 😂😂
@@15Romeo19 chris@fullsteamdedigns.com or instagram is the best contact
Thank you
Does the toolpath save file matter if it is the Carbide MM type or the Carbide INCH type? My router is just diving in to the hilt when it begins. I am only doing a profile tool pass.
I don’t think it does. Where do you have zero set? Top of the work piece in the program and machine?
@@ChrisPowellFSD top in both. I started over and remade the project but got the same results.
How can you make that into a wavy flag
You would need maker plus
Thank you is there a trial of that , I would want to see if it is worth the money as there is a considerable price difference
@@ChrisPowellFSD and again thank you for your help, I have just upgraded to the longmill and looking at getting more involved in this
@@coachalan22 I’m not sure if there’s a trial. You could always try it for a month and then cancel is. Personally, I’d probably just buy it out right if it is something you like. CHRISPOWELL should save you some money.