point 1 : why do you want to disable the soft start feature of the inverter ????? It is a very good thing 🤔🤔🤔🤔. are you here to test me ????? because you did not like or sub first ????
Sorry my bad I have sub, why I want to disable the soft start is because I built a auto transfer circuit with a 8 pin relay for automatic changeover from grid power to inverter, but with the soft start it doesn’t work simultaneously. If no grid power the inverter won’t pick my load immediately and all my appliances will have to restart. It’s not nice I want to disable it but I can’t find the driver circuit anyway . Please can you guide me? I’ll truly appreciate thank you
@@emmanuelfestus3007 well..... I understand your problem completely, has I also faced a similar problem, in which the relay makes a grinding noise due to the soft start of the inverter, but I used a different method to solve that problem. but if you really want to make changes within the inverter to disable the soft start feature of the inverter so I did not have any video on this issue because no one has ever asked about this topic until now. but I searched on RUclips and I found someone else video here the link ruclips.net/video/9Qvn6sFiNDg/видео.html watch this video and if you like please share your feedback with me, does it really work or not? in the last, you write " I can’t find the driver circuit "If there is no driver circuit in your inverter, it might be your inverter is a modified sine wave, not a pure sine wave. in that case, it will be more difficult to disable the soft start thing.
That last part was a mistake, the is a driver board card in the inverter and it's a pure sine wave. The driver card isn't an ESG002 card so its different settings to short the jumper. In ESG002 card jumper 6 is responsible for soft start. But my inverter card isn't ESG002. Same with your inverter in this video it isn't Esg002
Hello engineer nice video, do you know how to disable the soft start jumper on the driver board module in this inverter.
point 1 : why do you want to disable the soft start feature of the inverter ????? It is a very good thing 🤔🤔🤔🤔. are you here to test me ????? because you did not like or sub first ????
Sorry my bad I have sub, why I want to disable the soft start is because I built a auto transfer circuit with a 8 pin relay for automatic changeover from grid power to inverter, but with the soft start it doesn’t work simultaneously. If no grid power the inverter won’t pick my load immediately and all my appliances will have to restart. It’s not nice I want to disable it but I can’t find the driver circuit anyway . Please can you guide me? I’ll truly appreciate thank you
@@emmanuelfestus3007 well..... I understand your problem completely, has I also faced a similar problem, in which the relay makes a grinding noise due to the soft start of the inverter, but I used a different method to solve that problem. but if you really want to make changes within the inverter to disable the soft start feature of the inverter so I did not have any video on this issue because no one has ever asked about this topic until now. but I searched on RUclips and I found someone else video here the link ruclips.net/video/9Qvn6sFiNDg/видео.html
watch this video and if you like please share your feedback with me, does it really work or not?
in the last, you write " I can’t find the driver circuit "If there is no driver circuit in your inverter, it might be your inverter is a modified sine wave, not a pure sine wave. in that case, it will be more difficult to disable the soft start thing.
That last part was a mistake, the is a driver board card in the inverter and it's a pure sine wave. The driver card isn't an ESG002 card so its different settings to short the jumper. In ESG002 card jumper 6 is responsible for soft start. But my inverter card isn't ESG002. Same with your inverter in this video it isn't Esg002
Yes I saw the video, his method only works for ESG002 cards. Ours is different.