Love this little guy, I noticed I was getting a lot of battery sag on the bi-blades and gnb 500mah so I've put some Gemfan tri-blades and have ordered some Tattu R-line 500mah should be a beast now lol. Great flying! The range on this whoop is game changing I think.
Yeah, I'm not impressed with the bi-blades either. I have a Mobula6 that I basically converted to a Mobula7 and it came with the tri-blades and I was thinking about swapping my Mobula7 over to them.
I went to switch and realized the 3 blades I had from the Mobula6 were not the same motor shaft diameter so couldn't do it. Going to order some proper 3 blade props for my motors soon.
Cool video and smooth footage. I noticed I get a lot of camera shake and jitter in the onboard footage, nowhere near as smooth as your video. Have you experienced this? If so, what did you do to solve this?
Try tightening or loosening the canopy screws. There's a sweet spot where the rubber mounts can do their job dampening the camera. Too tight and they're basically solid mounts, too loose and they wobble too much. Also make sure your props are in good shape. If the tips are chipped/missing they will be out of balance and cause a lot more vibration.
Did you ever end up buying all these? I know nothing about FPV and want to get into it. Are all these compatible and is banggood a good place to get all 3 of these? Also any tips of like how to link everything or should I just watch a video on it?
@@Bigmack316 still haven't bought it. When I do, I think I will get the mobula 6 without the camera to get used to it and then jump to a 5in quad. I have no experience at all about the bind process
@@VVhatchagunnado The first day I got it I put the SD card in the wrong slot and only got the GPS data, so I know it works. I then swapped the card into the DVR slot and haven't messed with the blackbox since. I finally have some free time tonight and found my extra micro SD cards so I plan to try that out tonight. I already installed Gyroflow on my desktop so we'll see how that goes.
Very nice. Who would have thought a 1S whoop would do all this even just a few years ago.
great flying dude 😍
Love this little guy, I noticed I was getting a lot of battery sag on the bi-blades and gnb 500mah so I've put some Gemfan tri-blades and have ordered some Tattu R-line 500mah should be a beast now lol. Great flying! The range on this whoop is game changing I think.
Yeah, I'm not impressed with the bi-blades either. I have a Mobula6 that I basically converted to a Mobula7 and it came with the tri-blades and I was thinking about swapping my Mobula7 over to them.
I went to switch and realized the 3 blades I had from the Mobula6 were not the same motor shaft diameter so couldn't do it. Going to order some proper 3 blade props for my motors soon.
Wushhhh... The flash bro 👍🏼
Woah nice flight! What antenna do you use for goggles?
I have one of the pole antennas that came with my cheap goggles on one side and a FarVew Pagoda 2 on the other side.
farvew.com/29-pagoda-omni
Cool video and smooth footage. I noticed I get a lot of camera shake and jitter in the onboard footage, nowhere near as smooth as your video. Have you experienced this? If so, what did you do to solve this?
Try tightening or loosening the canopy screws. There's a sweet spot where the rubber mounts can do their job dampening the camera. Too tight and they're basically solid mounts, too loose and they wobble too much. Also make sure your props are in good shape. If the tips are chipped/missing they will be out of balance and cause a lot more vibration.
Nice video! Do you think this drone + a jumper t-lite v2 elrs + Eachine v800d googles would be a good kit for a first drone?
yup an awesome starter kit!
Did you ever end up buying all these? I know nothing about FPV and want to get into it. Are all these compatible and is banggood a good place to get all 3 of these? Also any tips of like how to link everything or should I just watch a video on it?
@@Bigmack316 still haven't bought it. When I do, I think I will get the mobula 6 without the camera to get used to it and then jump to a 5in quad. I have no experience at all about the bind process
@@viniciusmacie1 whats the difference in the 6 vs the 7
@@Bigmack316 mostly the size vs power x mobility and price I guess
did you put the hd camera on yourself?
No, this is a completely stock mobula 7 1s hd.
what goggles are you using
@@eskimo2k
bills boats works
Stock tune?
Yep, just setup turtle mode and slapped in some packs.
@@eskimo2k have you gotten the blackbox sd card to work? Is it connected to UART1?
@@VVhatchagunnado The first day I got it I put the SD card in the wrong slot and only got the GPS data, so I know it works. I then swapped the card into the DVR slot and haven't messed with the blackbox since. I finally have some free time tonight and found my extra micro SD cards so I plan to try that out tonight. I already installed Gyroflow on my desktop so we'll see how that goes.
same my blackbox isnt being detected