Not sure why 48 people disliked the video. This is the best tutorial ever on how to do this job. Peter made it so clear and concise I don't have any doubts in being able to do this now. Thank you!
I have a 2002 Toyota Echo and I just came from the garage and they told me way to big a job to adjust cables,so thanks to your video,I am going to give it a shot myself.thank you sir !!!
It is very good that persons like you share your knowledge. I have 1993 Camry with 360,000 kms so I was not expecting help for such an old car. Thank you very much!!!
I can now adjust the hand brake of my daughter’s Toyota Camry. Thanks Peter for showing us the right way to do it. Will save me some money from bringing the car to the mechanic
Peter, I appreciated how you demonstrated how to do the job right the first time and avoid damaging any components. Unable to do much on my car these days, because of the complexity of the modern engines etc, but after watching you, I will have a go at this job. While the hand brake is needed for safe parking, it may also save the transmission, if I get a minor shunt from the front or rear, while it is parked. Thanks from Australia.
thank you so much for this slow explanation and honest video , not so many honest mechanics like you today , continue to do this nice video about about a cars ... (( be blessed ...
Wonderful presentation and very clearly done as a step - by - step procedure. You even show some of the little problems that can occur. Thank you! I will use your information.
@@PeterFinnTheCarDoctor you are welcome. I have a,1994 Toyota Camry. 4 cylinder. Some of the dash lights are not working,. Speedometer works , but the dash lights for the stereo and heater fan , selector and the floor shifter lights work once in a while. I wonder what it could be as to why, ? Any information would be greatly appreciated. Thanks again for your videos on E brakes issue , not working 👍👍. Bill
Awesome video. Mine might not be working, so I think it needs adjusting. Your careful explaination , step by step instructions on how to remove interior parts to get to the emergency brake , cable. Thanks for sharing. Great video 👍👍👍.
I am not a mechanic, I liked your video and the way you showed me how to do the cable tensioning. I would have thought that you should have jacked the vehicle up and put on jack stands, and then before assuming that the tension was right,,, go and see how the wheels spin freely. BUT I guess by evaluating the clicks and thereby the tension in the cable would be sufficient. I learned from you, but I will jack the vehicle up as I am not a mechanic and would not be sure that I have the right tension,,,, perhaps also the shoes should be adjusted,,, I don't know about it, but I am about to do a Camry 2003 cable,,, if there is a cable,, the handbrake leaver has no resistance as if there is no cable or connection at all. Can you can you come to North Queensland and do it for me? Cheers, and thanks Peter Finn. Yes by the accent I know you are from lovely, friendly Finland.
3/8 ratchet? Its not a tractor trailer lol its called a lock nut not a bolt . Every step could have been covered in a 2 minute video. Brake shoes should be checked and adjusted first .
![Eminem - Like My Shit [Official Audio]](http://i.ytimg.com/vi/vx_IMvFkrfA/mqdefault.jpg)
Not sure why 48 people disliked the video. This is the best tutorial ever on how to do this job. Peter made it so clear and concise I don't have any doubts in being able to do this now. Thank you!
I appreciate that!
I have a 2002 Toyota Echo and I just came from the garage and they told me way to big a job to adjust cables,so thanks to your video,I am going to give it a shot myself.thank you sir !!!
Thanks for info. :-)
Easiest fix ever! Thank you! This video saved me a trip to a mechanic
+Leonardo Meza Hi, thanks for info. :-)
It is very good that persons like you share your knowledge. I have 1993 Camry with 360,000 kms so I was not expecting help for such an old car. Thank you very much!!!
Thanks for comment. :-)
I can now adjust the hand brake of my daughter’s Toyota Camry. Thanks Peter for showing us the right way to do it. Will save me some money from bringing the car to the mechanic
Right on!
Peter, I appreciated how you demonstrated how to do the job right the first time and avoid damaging any components. Unable to do much on my car these days, because of the complexity of the modern engines etc, but after watching you, I will have a go at this job. While the hand brake is needed for safe parking, it may also save the transmission, if I get a minor shunt from the front or rear, while it is parked. Thanks from Australia.
Thank You for Your comment. :-)
Very instructional video. Made it very simple.
Glad you liked it!
Thank you for your contributions. From one mechanic to another, you've really helped me over the years. Cheers!
Great to hear!
Thanks alot worked great and took about 20 mins tops with a smoke break! Saved a trip to mechanic and got car to pass inspection!
Thanks. :-)
thank you so much for this slow explanation and honest video , not so many honest mechanics like you today , continue to do this nice video about about a cars ... (( be blessed ...
I appreciate that!
Wonderful presentation and very clearly done as a step - by - step procedure. You even show some of the little problems that can occur. Thank you! I will use your information.
JU8788 Thanks for comment.
Double thumbs up. Excellent video. Now I know how to adjust the E brake. Thanks. 👍👍
Thanks 👍
@@PeterFinnTheCarDoctor you are welcome. I have a,1994 Toyota Camry. 4 cylinder. Some of the dash lights are not working,. Speedometer works , but the dash lights for the stereo and heater fan , selector and the floor shifter lights work once in a while. I wonder what it could be as to why, ? Any information would be greatly appreciated. Thanks again for your videos on E brakes issue , not working 👍👍. Bill
Awesome video. Mine might not be working, so I think it needs adjusting. Your careful explaination , step by step instructions on how to remove interior parts to get to the emergency brake , cable. Thanks for sharing. Great video 👍👍👍.
Cool, thanks
Thanks for making the video. I have state inspection this month and will assume they will check it. Mine also needs adjustment.
Glad it helped
I am not a mechanic, I liked your video and the way you showed me how to do the cable tensioning. I would have thought that you should have jacked the vehicle up and put on jack stands, and then before assuming that the tension was right,,, go and see how the wheels spin freely. BUT I guess by evaluating the clicks and thereby the tension in the cable would be sufficient. I learned from you, but I will jack the vehicle up as I am not a mechanic and would not be sure that I have the right tension,,,, perhaps also the shoes should be adjusted,,, I don't know about it, but I am about to do a Camry 2003 cable,,, if there is a cable,, the handbrake leaver has no resistance as if there is no cable or connection at all. Can you can you come to North Queensland and do it for me? Cheers, and thanks Peter Finn. Yes by the accent I know you are from lovely, friendly Finland.
th
Thank you Peter Finn, always a good mechanical video on fixing my Toyota myself with your videos
Thanks for watching! 😀👍
Going to go and do this in the morning, wish me luck.
I read your comment. Thank You. 👍😀
Thanks so much for the video. You just saved me money that was going into the mechanic's wallet lol
Can't u just adjust/tighten the rear drum brakes ? Won't that tighten up up the ebrake ?
This is awesome!!! love the clarity! Keep up the good work buddy!
Thanks
Great video, now I can do it myself, thank you!!
Glad I could help!
Great video...that's what I wanted to do for a long time..
Thanks for Your comment. :-)
Thank you very much for your help . you are very good
Thank You, Your feedback is very important to me. :-)
Great video it was help me out. Thank you so much!
+Honda2014 Thank You. I appreciate Your feedback.
thx u very much!!! I will do tomorrow!
GERRARD9292 Thanks for info.
Thank you so much
Any time👍
Great Video, well explained - thanks
Good and Thanks for feedback. :-)
Great video if it’s reduced to 2:04.
Thanks 👍
Does this work on 2002- 2006 models?
Is it the same procedure fora 2000 Camry 4-cylinder model?
Yes and thanks. :-)
how to change kabel kamry 2009?
Thank you!!
+Luis Martinez You are welcome. :-)
Is this the same or similar on 1970's chevys
+Jessy James Sorry, I don't know 1970's chevys. :-)
What about Manuel
👍
Awesome!
Hi and many Thanks for feedback! :-) Best Regards Peter
what year is this camry? thanks.
+W Guan 1992 to 1997
+Peter Finn thanks Peter
tu + sub brother. now that's detail
Thank You very much. :-)
ahhhh .. here's the cable! 👈
ASMR??
Yes
Accent too thick, please translate.
Yeah 👍
3/8 ratchet? Its not a tractor trailer lol its called a lock nut not a bolt . Every step could have been covered in a 2 minute video. Brake shoes should be checked and adjusted first .