Hi friend . Your vide was useful for me thah I was looking for a simpel method and explanation for learning. Although there are many video about teaching that but most of them in hindi language that I do not their language. So your video was great for me well done. Good wishes for you.from iran.
Thank you this ids exactly what i am doing now with an LCD tv.please post that bypass video when you can as i have lines and no video. Really appreciate your tim Lewis
Very nice explanation friend. I have this Sony Bravia KVL-32EX300 and displays white screen ... The sound is okay. Ichecked all the voltages and all is good. What do you think is the problem?
Followed your video and these are the readings that i got from my TV Vin - 12.27v VGH - 27.9v VCC - 1.78v VGL - minus 5v VDD - 16.02v HVDD - 8.02v Vcom fb - 6.17v MY TV is starting and its only showing black glowing screen, no sound of menu from pressing button on remote. I opened the tv, the backlight is glowing. Please guide me sir, what do you think, this problem is coming from? what should I check next? Thanks, lot, for the amazing video! Story of my TV issue from beginning - So My TV started showing lines, sometimes it would disappear, but it slowly got worse, more and more lines, to the point that there were only lines on TV, vertical as well as horizontal. Then after that few days, TV screen got black, but the sound was still coming, when I pressed navigation or volume up down button! Just one day later, and to this moment, it's just black screen and no sound coming, if I press the tv volume button or arrow buttons!
My panel is showing 16 volt in VCC Vgl - 1.2 volt Vaa- 2.4 volt Vgh -2.9 volt Vghf - 2.3 volt Fvghf - 2.3 volt Vdd- 4.4 volt Vgl and vgh gives beep sound when I check for continuity. I did all the possible things available in youtube, nothing happened. Can you give immediate reply? My tv model is mi 43 inch, 2019 model. Problem was no display (sound on), backlight is coming
It look likes your DC-DC Ic is short or any PF near boost voltage area is short, because all your voltages are lower than limit, You can try removing DC-DC ic and attach external scaler to give these voltages, I have 2,3 videos on my channel to add external scaler and panel repairing, follow them
Hi again my friend. Would you please leave a video and guide me how to install a sound board for the led and lcd TVs samsung & kg company which most of time its sound ic is not here. At all in iran .and I am gonna to install a module of sound instead of! Thanks a lot.
Brother I am not understanding what you are asking for? Do I use these words in video?if yes then tell me the time in video I will explain you otherwise kindly tell me clearly what you are asking,
@@ElectronicSecret sorry man mt4761B-1-c-2 tcon board vgl am getting -6v VGH1 am getting +6v. VGHF1 am getting +8v what could be the issues picture slow and no quality picture
You are very good in explanation with English. Very good technician. Thanks for teaching!!!
Welcome my brother
This is the the best panel repair video I've seen after watching hundreds of videos. Thanks and God bless you.
Welcome
Wow very good teaching & good english your now my master...THANK YOU VERY MUCH...
Welcome
VERY UNDERSTANDABLE ENGLISH! THANKS
Hi friend .
Your vide was useful for me thah I was looking for a simpel method and explanation for learning.
Although there are many video about teaching that but most of them in hindi language that I do not their language. So your video was great for me well done.
Good wishes for you.from iran.
Welcome
Great teaching. Simple, direct, and informative. God bless you.
Welcome bro
Lots of thanks sir. Your explain are very good. Thank you sir....
Welcome
Good explanation and lesson there is sub title 10q sir keep it up all time doing on this condition helps us can't understand another language
Thank you so much. I learn very well from your video. 🙏🏻🙏🏻⚘⚘
Welcome
Good work and explanation bro, keep it coming. thanks a lot
Thanks for compliments,
Calvin from Uganda. Thanks for sharing this beautiful information with us.
Welcome
Thank you this ids exactly what i am doing now with an LCD tv.please post that bypass video when you can as i have lines and no video. Really appreciate your tim Lewis
thank you for time and effort you put into this i am slowly leaning
Welcome
Excellent . Thank you very much, God bless you.
Welcome
Nice explanation
Keep watching
Good explanation!
Thanks
🙏🙏 nyc sir.... 🙏🙏🙏
Keep watching
very nice.. thanks master
So nice of you
Teaching very nice.improve to focus the component visuvals and test points in cam
Thank you very much for your teaching!! I have a question do you know what voltage has vdd+ and if it is allowed to have continuity to vss
Very nice explanation friend. I have this Sony Bravia KVL-32EX300 and displays white screen ... The sound is okay. Ichecked all the voltages and all is good. What do you think is the problem?
Very nice
Thanks
Liked your video
Nice one
Thanks for watching
Thanks for sharing
Welcome
Followed your video and these are the readings that i got from my TV
Vin - 12.27v
VGH - 27.9v
VCC - 1.78v
VGL - minus 5v
VDD - 16.02v
HVDD - 8.02v
Vcom fb - 6.17v
MY TV is starting and its only showing black glowing screen, no sound of menu from pressing button on remote. I opened the tv, the backlight is glowing.
Please guide me sir, what do you think, this problem is coming from? what should I check next? Thanks, lot, for the amazing video!
Story of my TV issue from beginning - So My TV started showing lines, sometimes it would disappear, but it slowly got worse, more and more lines, to the point that there were only lines on TV, vertical as well as horizontal. Then after that few days, TV screen got black, but the sound was still coming, when I pressed navigation or volume up down button! Just one day later, and to this moment, it's just black screen and no sound coming, if I press the tv volume button or arrow buttons!
I want to ask something so all of those voltages which u were testing ,is it written on the board?
thanks sar
Welcome
My panel is showing 16 volt in VCC
Vgl - 1.2 volt
Vaa- 2.4 volt
Vgh -2.9 volt
Vghf - 2.3 volt
Fvghf - 2.3 volt
Vdd- 4.4 volt
Vgl and vgh gives beep sound when I check for continuity. I did all the possible things available in youtube, nothing happened.
Can you give immediate reply?
My tv model is mi 43 inch, 2019 model. Problem was no display (sound on), backlight is coming
It look likes your DC-DC Ic is short or any PF near boost voltage area is short, because all your voltages are lower than limit,
You can try removing DC-DC ic and attach external scaler to give these voltages,
I have 2,3 videos on my channel to add external scaler and panel repairing,
follow them
Thankyou very much
good
Hi again my friend.
Would you please leave a video and guide me how to install a sound board for the led and lcd TVs samsung & kg company which most of time its sound ic is not here. At all in iran .and I am gonna to install a module of sound instead of!
Thanks a lot.
Ok I will do it
❤❤❤❤
Thank you .. my Samsung lcd ..white screen problem .... What is the problem
Firstly check 12v coming to panel from Lvds cable,
Mainly it is due to this voltage not reaching at panel scaler or Tcon board
@@ElectronicSecret thanks for your kind reply sir... I want to send my tv picture. To you how can I send you sir please reply
@@ElectronicSecret thanks for your kind reply sir... I want to send my tv picture. To you how can I send you sir please reply
@@ElectronicSecret please reply sir.. any contact number or mail id please
I love it
How can i chat with you directly
Insta : electronic_secret
Please what is the meaning of Mon l and Mon r on LCD panel
Brother I am not understanding what you are asking for?
Do I use these words in video?if yes then tell me the time in video I will explain you otherwise kindly tell me clearly what you are asking,
@@ElectronicSecret no sir this is a different thing please
Sir hind me video banay
Ok,zaror bnao ga
I have mt is showing 6v and pictures are make slow motion
What is mt?
@@ElectronicSecret sorry man mt4761B-1-c-2 tcon board vgl am getting -6v VGH1 am getting +6v. VGHF1 am getting +8v what could be the issues picture slow and no quality picture
Show panel by pass
Hindi nhi aati kya angrej
Your video quality very very bad quality
Dear it was my starting video,now video quality is ok,
Good explanation and lesson there is sub title 10q sir keep it up all time doing on this condition helps us can't understand another language
Very good
Good explanation and lesson there is sub title 10q sir keep it up all time doing on this condition helps us can't understand another language
Thanks,
And Welcome