Thank you for sharing your great woodworking skills and designs. Very respectfully I have the suggestion of not showing entirely each of the repetitive actions on the videos. For example when drilling a series of holes.
So impressed with this new, to me, site. I am especially impressed by the way you two interact, whenever something is needed by the other (either other) its always there, must make a huge difference to the total experience for you and vastly improve output
Every time while you do what material do you use for wood bending ? Is that plywood? Whats the size of it 6/8 mm...?? Plz let us know every time...even in subtitles...please...
7 kerfs spaced 1/8” (4.5 mm) apart in 18mm plywood for each of those bends. Glue over your negative form and once dry use that same edge banding/flush trim process to reinforce and hide the kerfs. Alternatively you could skip the edge banding and fill the kerfs on the show edges with dyed epoxy to highlight them. Less time. Less mess.
So now I understand but this is when you crush thick plywood or MDF but I would not recommend cutting (2 sheets of 4mm) 8mmplywood and then glue again. It is my opinion. If you prefer to cut then this is your choice.
Newbie question here, but what method do you use to bend the wood without breaking it? I've seen some other examples of people doing this, but was curious as to exactly what you guys use. Thanks! (subbed!)
SUBSCRIBE
My Instagram - instagram.com/wooddesignyoutube/?hl=ru
My page in VK - vk.com/id550342074
What type of wood is that?
4mm plywood and top american walnut veneer
Trabalho fantástico, parabéns
👌👌👌👌👌👌👌👌👍👍👍👍👍👍
Круто 👍
Это шедевр! Вы -МАСТЕР!
Спасибо за поддержку нас это очень вдохновляет и мотивирует.👍😉
Очень достойно , а главное что у вас есть чувство вкуса , как ваш конкурент это говорю
спасибо за юмор
Master class once again👏👏
Thank you.
Thank you for sharing your great woodworking skills and designs.
Very respectfully I have the suggestion of not showing entirely each of the repetitive actions on the videos. For example when drilling a series of holes.
Сначала лайк, затем просмотр)))
Спасибо большое. )))
Toujours à la hauteur
Merci beaucoup.
So impressed with this new, to me, site. I am especially impressed by the way you two interact, whenever something is needed by the other (either other) its always there, must make a huge difference to the total experience for you and vastly improve output
Thank you so much for watching.
Как всегда🔥❣️
Спасибо)
а фанеру насухую гнули?
Супер, очень красиво получилось.
Лайк и подписка.
Как называется шпон, верней с какого дерева.
Спасибо. Это шпон американского ореха.
Every time while you do what material do you use for wood bending ? Is that plywood? Whats the size of it 6/8 mm...?? Plz let us know every time...even in subtitles...please...
Muchas gracias. Sí, esto es madera contrachapada de 4 mm.
Elegant and beautiful design, friend. Subbed!
Yes it's true ,thanks for the comment
Good
Thank you.
like
Thank you.
7 kerfs spaced 1/8” (4.5 mm) apart in 18mm plywood for each of those bends. Glue over your negative form and once dry use that same edge banding/flush trim process to reinforce and hide the kerfs. Alternatively you could skip the edge banding and fill the kerfs on the show edges with dyed epoxy to highlight them. Less time. Less mess.
I'm sorry but I don't understand what you mean
So now I understand but this is when you crush thick plywood or MDF but I would not recommend cutting (2 sheets of 4mm) 8mmplywood and then glue again. It is my opinion. If you prefer to cut then this is your choice.
تفاصيل الماده التى تلصق بيها القشرهDetails of the material the shell is attached to
Отличная работа. Подскажите, пжл, чем обрабатываете при шлифовке?
Маслом с воском.
@@WOODDESIGN6730 Спасибо!
Станок почем брали?
Вещица получилась солидная! Я бы ещё и внутри шпон наклеил, а так всё на высоте!
ДА спасибо за коментарий
Видео можно было раза в 2 сделать короче, очень затянутые планы....
но подставка в итоге вышла классная!)
КЛАССС,,,лайк,,,МОЛОДЦІ....
Спасибо))
👍👍
Thank you.
How did you bend the plywood without breaking it??. Wooww.. I'm always breaking it. 😂😂
Thank you.
Are you using a heatgun?
@@pssymgnt with kerfing or not?.. thank you so much.. will try it. 👍🙂
Oohh.. the video owner didn't do the kerfing.
@@justme8899 if its thin enough - without.
Newbie question here, but what method do you use to bend the wood without breaking it? I've seen some other examples of people doing this, but was curious as to exactly what you guys use. Thanks! (subbed!)
Thank you.
где шпон брали?
Вы можете заказать в онлайн магазине их много.
Hi very compliments for everything your items, just for info: is it possible to know the size of this laptop station? thx a lot!
Height at the front 10 cm, height at the back 15 cm, width 32 cm, length 48 cm.
@@WOODDESIGN6730 thanks! Have a nice day!
Подскажите пожалуйста, что за пленку вы наклеиваете и где ее можно приобрести?
Это шпон, заказывал я его в интернет магазине
Rather than using a piece of wood and bend it, I would prefer using acrylic as the base then covering it with wood textured vynil..
If you think it will be right as you say, then you can do it, I think it is right as I did.
Отличная работа, высший уровень! Только мне кажется для ноута высоковато будет, неудобно работать.
Спасибо за просмотр.
Здравствуйте. какая стоимость такой подставки?
А отверстия от саморезов просто зашпаклевали?
Да
какой клей вы используете для шпона?
Это контактный клей.
Одной марки или меняете?
DIY 🤔
If you add placeholders for mouse and pen jar, this would be complete.
Thank you so much.
फोरमाईक किस सिज से चिपकाया
Красво)
А нельзя выпилить "чпу"шкой по шпону дабы не вклеивать деревянные пазы потом?
Спасибо. Да можно, но будет видно в пазах фанеру а так видно дерево.
Отличная работа, но подставки для ноутбука оборудуют дополнительными кулерами для лучшего охлаждения, они для этого и предназначены
Спасибо за комент.
🖐️👍👍👍🤝🇰🇿
подставка дороже ноута:)
Да єто точно))))
Да пару книг или карандашей подложи и будет тебе охлаждающая подставка!
лайк однозначно
Но так красивее и круче
sorry sir this is not a diy
it s for highly professionnel of woodworking
Я охренел от их скила
Спасибо большое)
Annoying music.