How To Remove 2005 - 2020 Nissan Frontier Spare Tire - Jack Removal Location - Change Flat Tire
HTML-код
- Опубликовано: 9 окт 2024
- A quick video tutorial on how to remove the spare tire from a 2005 - 2020 Nissan Frontier.
This video will only apply to Nissan Frontier Crew Cab models.
If you need to change a flat tire on your Nissan Frontier, or simply just want to remove the spare tire you should perform the following.
TO REMOVE THE TOOLS AND JACK:
1. Fold the rear bench seat down.
2. Remove the jack s1 and jacking tools
TO REMOVE THE SPARE TIRE:
1. Fit the square end of the jack rod into the square hole of the wheel nut wrench to form a handle.
2. Find the oval-shaped opening under the middle of the tailgate. Pass the T-shaped end of the jack rod through the opening and direct it toward the spare tire winch, located directly above the spare tire.
3. Seat the T-shaped end of the jack rod into the T-shaped opening of the spare tire winch. Apply pressure to keep the jack rod engaged in the spare tire winch and turn the jack rod counterclockwise to lower the spare tire.
4. Once the spare tire is completely lowered, reach under the vehicle, remove the retainer chain, and carefully slide the tire from under the rear of the vehicle
This video will show you the location of and how to remove the spare tire on the following Nissan models:
2005 Nissan Frontier - Crew Cab
2006 Nissan Frontier - Crew Cab
2007 Nissan Frontier - Crew Cab
2008 Nissan Frontier - Crew Cab
2009 Nissan Frontier - Crew Cab
2010 Nissan Frontier - Crew Cab
2011 Nissan Frontier - Crew Cab
2012 Nissan Frontier - Crew Cab
2013 Nissan Frontier - Crew Cab
2014 Nissan Frontier - Crew Cab
2015 Nissan Frontier - Crew Cab
2016 Nissan Frontier - Crew Cab
2017 Nissan Frontier - Crew Cab
2018 Nissan Frontier - Crew Cab
2019 Nissan Frontier - Crew Cab
2020 Nissan Frontier - Crew Cab
More automotive DIY information available at www.programyou...
Find a Locksmith in your area with www.LocateALoc...
Thank you!! Walked out this morning to see I had a flat and for as long as I have owned my truck, I never knew how to drop the spare. This was much easier than digging the manual out and reading through the instuctions.
You're Welcome! Glad it helped
Same boat here! I'm so thankful to these wonderful content makers who make our lives easier.
I've changed numerous tires in my lifetime but this one had me stumped because I couldn't get the release mechanism to unscrew. I feel so dumb because I was using the wrong end of the rod. Thank you so much for restoring my self esteem and confidence! Now I can teach my son's how to do this on their own...... without embarrassing myself 😂
Glad it helped!
You already did.
Thank you so much for this really great video. We came out to a totally flat tire on our 2008 Frontier. I'd never even thought about how to get the spare down and I thankfully came across your informative video.
You're Welcome!
Thank you, thank you thank you. For the life of me I could not figure out how to get the jack out.
You're Welcome! Glad it helped
Same here
15 yrs later!
Nether did I
Thanks. 2015 frontier, just popped a tire on the way home in the rain, Ive used a jack plenty, but had no clue how to remove the spare. You saved my day!
Glad it helped!
I have a 2016 Frontier and didn’t even know where the spare tire tools and the spare even was. Great video and a big THANK YOU!
You're Welcome!
Never touched anything to do with a tire in my 41 years, boyfriend and daddy have always done it... I know, pathetic! Anyway, watched your video and got it right down! Actually so proud of myself lol. Will change the tire in the morning when I have help to guide me as I'm scared to jack it up myself. Great video!
Glad it helped!
Thanks for posting. My spare was mounted the opposite way (outer side up) and my local tire store said when mounting it back with new spare, it could be mounted the outer side down, keeping the pressure dimples off the visible sidewall. Just needed a second confirmation. 👍👍
Had a flat. I knew I would need some help. Watched this video and so glad I did. You saved me lots of time and cut out lots of guess work. Thank you and God bless you!!!!
You're Welcome! Glad it helped
Great video! My tire was loose and bouncing around. Now I know how to snug it up. Thank you!
You're welcome!
Thanks for the clear presentation. I want to check the pressure on the spare, and I'm glad to see its so easy. I'll put the crank handle on the other way, though.
Glad it helped
Thank you for the video i came out of the gym and noticed a nail on my tire I was using the wrong end of the rod to bring my spare tire down now i know the correct way to use it 😅
You're Welcome! Glad it helped
thanks man just bought this truck and was confused on how to get to the spare saving this video for the furture in case i ever need it
You're Welcome!
The only video that shows how to pass the chain through the wheel 😅🎉😂😊😊
Thank you so much! Worst way to start a workday but you made it so much easier.
You're Welcome! Glad it helped
Wow. I'm ashamed to admit this, but I couldn't for the life of me figure out how to get that spare out. Thanks for the video
You're welcome!
Thank you!! I've had this truck for a long time, haven't a changed a tire in years, and have no idea where the owner's manual went so I forgot how to drop the spare.
You're Welcome!
Super helpful video definitely liked , just got a 2020 midnight edition crew cab and wanted to know how just in case if I ever get a flat thank you !!
You're Welcome! Glad it helped
This is a great video, I looked before I tried to do this on my 2016 Frontier. Looks like there is a vinyl cover that appears to cover the top of the wheel I will look for that. Your wheel was stored with the air valve facing down towards pavement. I can tell that on my car from the factory the air valve is pointing up towards bed of truck. THE ONLY REASON I'M DOING THIS is to add air to spare so dash light goes out. Looks like I can put it back like yours. THANKS VERY MUCH!!
You're Welcome!
Thank you. I'm planning a trip with my truck and want to be prepared if I have a flat.
Thank you for the video
You're welcome! Have a good trip!
If you have wheels with special nuts to prevent theft then you also have a special nut to lower the spare tire. It took me a few hours to figure it out, but if the T piece isn't working, attach it to the chrome looking piece in the tool pouch. It has the wavy circle at the end that engages the nut. Otherwise, it's the same procedure.
Good Tip
This comment just helped me so much, I was getting extremely frustrated because the T tool wasn't catching on anything and I was just cranking it like crazy.
Thanks for the tip!
@@cinno09 glad I could help! I was turning the darn thing for over an hour, thinking I was missing the mark.
This must be my problem, thanks for the tip !!
The gentleman explained very well and to the point 👍. Thank you.
Thanks! Glad it helped
Your a life saver. I’m using a company truck. It’s a 2018 and I was stumped lol
Glad it helped!
Thanks for the video,it simultaneously saved my ass and made me feel like an idiot at the same time...lol..I got home about an hour ago and as soon as I got out of the truck I heard the air hissing out.I checked the tire out and realized I had picked up an Allen wrench somewhere between work and my house.I got the jack out along with the lug wrench and attachments.I put the “T” shaped piece into the little slot above the license plate and dropped to spare to the ground.then I started inspecting the piece on the end of the chain and I couldn’t figure how to remove it.then I pulled out the owner’s manual expecting to find the instructions on how to separate the chain from the spare.unfortunately,those particular instructions did not exist.I started getting frustrated because I knew there had to be an easy solution..when I seen all it required was to turn that piece sideways and push it through the hole,I immediately felt like the worlds biggest moron 😂..such an easy,common sense solution and it never even crossed my mind 😂
Glad it helped!
Very helpful! Thanks for making this.
You're Welcome!
Very easy to follow video got my spare in same time as I finished the video
Glad it helped!
I have a 2019 Pro4x. I just watched this now. It's good to know just in case I get a flat. Thanks for sharing.
You're Welcome! Hopefully you won't need to use it anytime soon
Thank you for this video! Kept me from being late to work!
You're Welcome! Glad it helped
Great. Beats reading the manual for sure.
Glad it helped
great video, very clear very easy to understand
Thanks! Glad it helped
Thanks. This helps a lot. The Nissan dealership that I bought the truck from didn't include the owner s manual
You're welcome! Glad it helped
Thanks for the video. I recently picked up a 2006 Frontier and your vid showed me how I can get to the spare and check its quality and air pressure. Looks pretty simple. Hopefully I can engage that T-connector by feel since it looks like you're not able to see where it engages. And that'll help when one of the tires invariably goes flat in the dark! Why does it always happen at night?? : )
Thank you kindly for making this post.
You're Welcome!
Great tutorial. Thanks for sharing!
You're Welcome!
I had no idea how to get the back seat down. Thankyou
You're Welcome!
Very good tutorial. Easy and straight to the point!
Thanks!
Great video. Thank you!
You're Welcome!
Thanks! Been avoiding changing a tire that fully deflates every night because I couldn’t figure out how to get to the spare. Well at least now I also have an air compressor 😂
👍
Thank you, I was uncertain about how to get the chain off.
You're Welcome!
Thank you from Brazil
You're Welcome!
Thank you for taking time to support it greatly appreciated ✌🏻
If you put the tire iron facing outwards it’s like a handle and makes life much easier
Yes!
Good video. Now I know how to get out of this jam if I run into it.
Thanks
Easy to understand my friend
Glad it helped!
Love my 2020 Pro4x. Thanks for the video subb'd. Hope you do many, many more Frontier vids.
Thanks!
Parabéns pelo ensino objetivo e fácil de se entender .
#Brasil.
This saved the day thank you!!
You're Welcome!
Thanks for sharing the knowledge
My pleasure
tq so much very clear n easy..
Your Welcome!
Thanks so much video was super helpful 👍
You're Welcome!
Nice presentation
Thanks!
When you push the T-shaped tool into the slot, and turn it slowly, to lock into place, do you turn it to the left or to the right?
I think either way will work actually
Great video
Thanks!
Excelente muchas gracias!!😜
Great information
Thanks!
Thanks for the video. I really could’ve screwed this up. LoL
LOL You're Welcome!
Great video. Thx.
You're welcome!
Can you show where the jack points are located on the Frontier?
Excellent, very helpful presentation! Thank you.
You're Welcome!
Thank you so much!
You're welcome!
Thank you!
You're Welcome!
My Nissan is a 2000 Model Pathfinder wagon. I changed a flat tyre and when I returned the tyre to winch under the car, I forgot which way the spare wheel was facing, wheel face (Mag star) down or up. I see your spare wheel 'inside' faces (chain side), is up and the outer face is down (3:00).
I checked on RUclips, none has a video of a '99-2000 Pathfinder about returning the spare wheel. Can you please give me a hint? Thank you.
I don't have a video for a 2000 Pathfinder so I can't say for certain but as long as it cranks up all the way, on whichever side, you should be good to go
This was great!
Thanks!
Excellent, thanks
You're welcome!
I purchased 2020 nissan frontier crew cab from Auction unfortunately the tools have gone ? Where can I buy ? And is all that tool fit for all crew cab models
I would check with a Nissan dealerships parts department to see if the tools kits are something they carry, otherwise I would just search around online for them.
Thank you!!
You're welcome!
So what do you use if you don't have the stock Nissan 3 piece rod set?
Cut the chain
Flag down another Nissan truck and ask to borrow theirs. This Tool also is factory in the following:
Toyota Trucks, Infinity SUV's, Lexus SUV's
Cut the chain
I know how to get it down but my hoist is frozen ,I got blaster but can't see where the area to spray.
How about replacing the chain if it is worn? Mine is 13 yrs old and don’t wanna cause an accident.
not sure on that - I have not replaced one
Thank you
Your Welcome!
whats the largest size tire you could mount down there with a 16in rim?
not sure on that
Thanks!
You're Welcome!
😁 thank you ver y much Big help
You're Welcome!
Thanks
You're Welcome!
I love you.
Can't get the T shape tool to lock into anything
Dez.
Muito bom
Don't make the same mistake I did. Watch this video before you have a flat tire. That way you won't be like me on the side of the road watching this video trying to figure out how the heck to get that spare tire down. Lol
I spent more time than I care to admit disassembling the contraption to get the tire off the chain. I am quite possibly the world's biggest idiot.
at least you know now lol
Tenkio
I've been doing this for 45 minutes and the tire still won't come down 😐
There must be some issue with mechanism that lowers the tire.
what a pain that is if you aren't in on flat and level ground with good weather and lighting🤬
Agreed!
You left out location to place jack to raise the truck😂
Solo la practica no entiendo el ingles
I have a 2003 only video I can find not helpful god damn it
Why do car makers do this? This is o dumb
Wow I thought I was an idiot because I couldn’t figure out how to get the damn thing out. Never in a million years would’ve guessed I needed to stick a wrench into a slot in the back like that.
Thanks for making this video! Very helpful
You're Welcome! Glad it helped
Super helpful, thanks!
You're welcome!
very helpful. thank you
You're welcome!
Thank you
You're welcome
Ty dude!
Welcome!