Makes a great difference. Still though, the M2 looks like a blank canvas for more body work styling to be done. That agressive styling up front leaves the sides and rear arches in need of something more.
you guys fit additional ppf to the arches.sills since the wheels have spacers? yellow drl's look fab though👍 dunno how folks can afford insurance after putting mods on cars it's way through the roof just now😒
We have a similar kit for the G82, with a video to be released in the coming weeks - www.evolveautomotive.co.uk/products/evolve-stance-kit-bmw-4-series-g82-m4?_pos=1&_sid=ffdd32015&_ss=r
There is no doubt this mod looks great along with the lowering and wheel spacer mod on the M4, I own the a G82 M4. But this mod looks great when it’s stood still and in real world scenarios with speed bums and restricted access what has been the experience of this mod? I literally came out of a drive way the other day and I was going slow over the speed restriction bump and something definitely got brushed under the car and my car has not been lowered. I agree it looks so nice and I am not being negative about this modification, just would want some more information than a B road test. Let’s face it most roads are in bad condition at present.
We have no issue driving all of our project cars in and around London. These cars have rubber air fins under the car that can drag over things but they’re flexible, seem to withstand it well and are fairly easily replaced if need be. Lowering a car is down to your personal environment, but we never lower a car to the point of being undrivable. It’s a car at the end of the day, if you can’t take it down a bumpy b road at speed and have some fun then you’ve kind of ruined its purpose.
They’re from the factory, they sit a good few inches lower than the rest of the car just behind the front wheels. The front also has a rubber splitter that hangs down and will rub before the bumper itself.
@@EvolveAutomotive sorry for the ignorance but since the car comes stock with an offset of +20, wouldn’t using the same spacers all around make the increase in all 4 corners the same?
Instant improvement, looks on point, will be interesting to see what the MSS kit looks like.
Looks Miles better when lowered, wow
The awkward stance was totally ruining the look!
What a huge difference ❤ would love an M2 like this
Wow what a difference! Looks amazing guys.
Ohhhh myyyy - i knew it would look nice lowered but this is mind blowing!! Great work
Massive improvement, the car suddenly looks appealing.
Looks so much better than stock 🇬🇧👍🇬🇧👍
Love this g87! Loved it the moment it came out. Great video great machine❤
Much more to come! ❤️🔥
P E R F E C T !!!
Great work fellas 👊🏼😎
Oh yea, that has nailed it!
Makes a great difference. Still though, the M2 looks like a blank canvas for more body work styling to be done. That agressive styling up front leaves the sides and rear arches in need of something more.
Oh there’s much more to come 😉
Perfection 👌🏻😎
Looks so much better - doing the same for mine in one month👊🏻
Drop us an email sales@evolveautomotive.com let’s get your M2 sitting better!
Did you get them? Hows the ride comparison?
Perfect
Did you guys have to code in the lowering springs or adjust the EDC settings?
No software adjustments needed
You need to start making lowering springs for g16 840i RWD version as no one offering springs for that model😉
How is the ride quality compared to stock!
Do the mods effect warranty?
Damn it… that looks great 😂👌🏻
Is your g97 PPf, ceramic coated or both. I would get your set up unfortunately it will invalidate my warranty
you guys fit additional ppf to the arches.sills since the wheels have spacers? yellow drl's look fab though👍 dunno how folks can afford insurance after putting mods on cars it's way through the roof just now😒
We haven’t done any additional PPF yet, but an owner could if they were worried about it.
Is this kit available for the G01 X3?
We can offer something similar, please email sales@evolveautomotive.com
Do you have this solution for G82, in one of your videos?
We have a similar kit for the G82, with a video to be released in the coming weeks - www.evolveautomotive.co.uk/products/evolve-stance-kit-bmw-4-series-g82-m4?_pos=1&_sid=ffdd32015&_ss=r
Nice stance👌
Great job again there Aston👍
Keep the yellow DRL’s tho!🙄
Some love em and some hate them! Hopefully they’ll make a little more sense as the project progresses 🤫
There is no doubt this mod looks great along with the lowering and wheel spacer mod on the M4, I own the a G82 M4. But this mod looks great when it’s stood still and in real world scenarios with speed bums and restricted access what has been the experience of this mod? I literally came out of a drive way the other day and I was going slow over the speed restriction bump and something definitely got brushed under the car and my car has not been lowered. I agree it looks so nice and I am not being negative about this modification, just would want some more information than a B road test. Let’s face it most roads are in bad condition at present.
We have no issue driving all of our project cars in and around London. These cars have rubber air fins under the car that can drag over things but they’re flexible, seem to withstand it well and are fairly easily replaced if need be.
Lowering a car is down to your personal environment, but we never lower a car to the point of being undrivable.
It’s a car at the end of the day, if you can’t take it down a bumpy b road at speed and have some fun then you’ve kind of ruined its purpose.
Appreciate the response and wasn’t aware of the rubber fins. Are these fitted from factory or as part of the mod? Thanks for the honest response
They’re from the factory, they sit a good few inches lower than the rest of the car just behind the front wheels.
The front also has a rubber splitter that hangs down and will rub before the bumper itself.
Imran, what watch is that?
why not 15mm in the back also?
Because then the rear would stick out more than the front. We go for 15/12 to give an even look.
@@EvolveAutomotive sorry for the ignorance but since the car comes stock with an offset of +20, wouldn’t using the same spacers all around make the increase in all 4 corners the same?
You are correct, but the distance from edge of wheel to edge of wheel arch is different front to back and that’s what we’re looking at
@@EvolveAutomotive ah…gotcha, thank you!!
Can't wait to see a louder exhaust on one of these
Definitely needs a bit more volume!
@@EvolveAutomotiveindeed
Yeah, and I can't wait to hear different rims on one either 🤣😜🤣
Sold. Now just get 'em to me downunder so I can fix the Monster Truck and cruise with the cool kids. :)
We ship worldwide! - www.evolveautomotive.co.uk
Gotta be 1st mod
Great starter kit for any M2 owner!
it looks "complete" now
❤
Ι think -3.5 cm is a bit too much. Especially the rear with passengers inside will look too low. This is not a slammed Civic.
What will the insurance company say.
Nothing if you tell them and they cover modifications
It's too low, this is more for show than go, good for cruising but not hard driving.
Need to fix the head lights and the shape of the grills, they are easily the worse thing about the car
🤣🤣