I built a turbo 8v Golf 2 like this. I use a G60 intake manifold which puts the air intake on the opposite side. I run the compressor output forward over the oil cap and alternator, and curve back to the other side of the engine and I use a PWR water-to-air intercooler mounted directly above the timing plug on the top of the transmission. I use an intercooler pump from a supercharged Mustang and a large B&M oil cooler for the heat exchanger. I use a Garrett T3 50-trim turbo from a Saab 900. The engine uses G60 pistons for 8:1 C/R and CIS injection controlled by an Unwired Tools UTCIS-PT. I have a 16V trans with a Quaife LSD. This system works very well and the car puts more than 200HP to the wheels on pump gasoline.
Hey. I have the same exhaust manifold (exhaust collector) off a mk2 1.6TD. What PSI are you pushing with that turbo? How did you set your timing? Or are you using megasquirt??? What's the compression at? 10:1 ?
I built a turbo 8v Golf 2 like this. I use a G60 intake manifold which puts the air intake on the opposite side. I run the compressor output forward over the oil cap and alternator, and curve back to the other side of the engine and I use a PWR water-to-air intercooler mounted directly above the timing plug on the top of the transmission. I use an intercooler pump from a supercharged Mustang and a large B&M oil cooler for the heat exchanger. I use a Garrett T3 50-trim turbo from a Saab 900. The engine uses G60 pistons for 8:1 C/R and CIS injection controlled by an Unwired Tools UTCIS-PT. I have a 16V trans with a Quaife LSD. This system works very well and the car puts more than 200HP to the wheels on pump gasoline.
хорошо постарался!
Nice project
Les piston vous avez changer avec les forgé ???
The piston have changed the original too the forged
Nice! I will buy your kit if you make them
i like the music!
is everything working right ? any problems you have/had ? What about engine still working well ?
Hey. I have the same exhaust manifold (exhaust collector) off a mk2 1.6TD. What PSI are you pushing with that turbo? How did you set your timing? Or are you using megasquirt??? What's the compression at? 10:1 ?
no intercooler??
No kurienes ņem ieplūdi eļļai priekš turbīnas?
hey , how it dirves? i have similar project , but i use megqsuqrt ecu.
how much HP the car make?
What about pistons ?
From what is the exhaust collector?
how kw is now ????
is work ????????????
Gribējās redzēt kā iet! :)
And the intercooler?? I think thats not going to work good
cv???
Kas par turbīnu, no kā ņēmi ?
ta turbīna no 1.6td
tagad viņš pārdodas pa 600 bez turbo
:)
šis labs++++
idiali vnk idiali nostradats.
guys can someone please contact I wana charge my motor at home need help to please help me