This video was extremely helpful. There is no need for new although, because there is no bearings just bushing you can sand the post and the bushing making like new. Thanks
Worked beautifully. But folks, when you take your dryer apart, pay special attention to the blower seal (gasket where the front of the dryer meets the blower fan). Mine was stretched out beyond re-installation. The replacement part for my Maytag MDE4000AYW is no longer available from APP or anywhere else. I lucked into a resale of one on ebay, but if I hadn't found a suitable replacement, replacing the drum rollers/axles, drum belt, and felt seal would have been too much time and money down the drain. Be forewarned and check your blower seal to find out if it is still in good shape before you open up those replacement parts.
Sir, this video/tutorial is brilliant. Not only very well edited but seriously, a pleasure to view. Professional, consise & quite way to follow instructions. In my case, I was able to merely spray the existing rollers with some "TRI-FLOW" Teflon spray & voila! Hast squeeked in over 3 months, so far... Fingers-crossed! 😉 🍀 Many thanks. Superb video!
Thank you very much! Part of my motivation for making videos like this is to make it easy for people to get the information they need without having to watch someone who can't talk straight hem and haw around for 40 minutes when the same info could be presented in 4 minutes (if done right). Based on your feedback, it was a success! :)
My mother, who happens to be significantly more savvy with machines than me, has asked me to break down her dryer so she can clean all the components. I would have been at this for hours if you hadn't listed the needed tools right at the start. Thank you.
Thank you for posting this - I think my Neptune is slightly newer than the one shown (it has LED lights and read out) - do you think the process will be the same?
This video was extremely helpful. There is no need for new although, because there is no bearings just bushing you can sand the post and the bushing making like new. Thanks
Thank you for the short,
straight forward, detailed and easy to understand repair video.
Glad it helped!
Good JOB!!!
Great video! Loved it being short, direct and simple
Glad it helped!
Worked beautifully. But folks, when you take your dryer apart, pay special attention to the blower seal (gasket where the front of the dryer meets the blower fan). Mine was stretched out beyond re-installation. The replacement part for my Maytag MDE4000AYW is no longer available from APP or anywhere else. I lucked into a resale of one on ebay, but if I hadn't found a suitable replacement, replacing the drum rollers/axles, drum belt, and felt seal would have been too much time and money down the drain. Be forewarned and check your blower seal to find out if it is still in good shape before you open up those replacement parts.
Great video. Very short and to the point, I fixed my dryer today and your instructions were spot on. Thank you
I LOVE how EXTREMELY verbally and visually detailed you are with your video.
Now I can do this myself...
THANK YOU SO MUCH💜💜💜💜💜
update..........fixed dryer...great directions..couldn't have done it with out this video....TY 👏🏻👏🏻
Great job!
Do you need to replace the dryer pins too? Some kits sell without the pins. Worth the savings or more trouble close down the road?
I'd replace the pins too while the machine is apart. You don't want to have to disassemble it again if you can help it!
@@TSGChannel2 thanks for the reply
My Amazon repair kit came with wave type washers for each roller. Are these ok to use and in what order?
best vid for this repair. Thanks!
Saved my patoot, man. Thank you very much for making this video.
It was pretty cheap to fix and not very hard to do! Just gotta follow the steps, right? Glad it helped you out!
haven't attempted yet BUT your video is great and makes the job approachable✔✔
This video was a big help and everything was just like the demonstration ,,thanks a lot ,
Thanks for the compliments, Keith. It's always my intention with all my how-to videos to help someone when they need it. :)
Sir, this video/tutorial is brilliant. Not only very well edited but seriously, a pleasure to view. Professional, consise & quite way to follow instructions. In my case, I was able to merely spray the existing rollers with some "TRI-FLOW" Teflon spray & voila! Hast squeeked in over 3 months, so far... Fingers-crossed! 😉 🍀 Many thanks. Superb video!
Thank you very much! Part of my motivation for making videos like this is to make it easy for people to get the information they need without having to watch someone who can't talk straight hem and haw around for 40 minutes when the same info could be presented in 4 minutes (if done right). Based on your feedback, it was a success! :)
Mine is making a bushing noise and not starting
My mother, who happens to be significantly more savvy with machines than me, has asked me to break down her dryer so she can clean all the components. I would have been at this for hours if you hadn't listed the needed tools right at the start. Thank you.
I DID THE SAME THING 👍👍👍👍👍BUT I and YOU BOTH IGNORED ONE THING 😱😱😱😱THAT IS FRONT GLIDE KITS 😨😢😰I AM DOING ALL OVER😱😱😱😱CHECK IT OUT👍WHAT I MENTIONED
No dust bunnies were harm while making John's Video
Tell ya what that thing was FILTHY inside!
Thank you for posting this - I think my Neptune is slightly newer than the one shown (it has LED lights and read out) - do you think the process will be the same?
I have the dryer you have mentioned, works exactly the same
Where did you buy the replacement parts?
Sorry, don't remember now. If you conduct a Google search, it shouldn't be too hard to find what you need for your repair job.
Can you replace a Atlantis dryer door with a Neptune one?
Sounds like two bunnies trying to escape.
Seriously that was some horrible noise!
My driers are a little bigger; they are commercial 30 lb machines. I own a laundromat.
As much as this one gets used, we could probably use a commercial one!