Another outstanding video.By an amazing coincidence earlier today I was teaching a group of young students about hydraulic braking systems and used a basic animation of a jack to show the principles involved around hydraulic brake force multiplication. This video will be brilliant tomorrow as an extra teaching resource and a great revision tool. Well done. Great stuff.
A very detailed presentation. I understand now how this hydraulic jack is composed of and how it coordinate with each part and function.. A part in the Law of Physics for lifting heavy loads
I worked for a while in a hydraulics repair shop, and one thing I learned that should be mentioned is to NEVER use brake fluid in a jack... it will turn the seals to mush.
Nice Video, could you please also explain what happens when we release the pressure and the cylinder retracts? Usually, there is another hole at the end of the bigger cylinder what purpose does it serve?
Use hydroulic jack for winding up spring of 50000 N force by hand pressed So we got a better power House for turning the Dynamo and electricity can cook food by microwave oven ???
How to get (liquid) from the reservoir into the smaller piston through the valve and not replace it with something else? I mean you can not take any liquid from the reservoir or even open the valve if it’s completely sealed. Unless the reservoir tank shrinks?
Best explanation of HJ for me. Sawed it for future references. Another explanations confused me. I have leak at top of unit and other explanations mislead me thinking that that area should be without oil. Unit is in floor jack so top is in horizontal position. Now I understand it is reservoir that is NOT under pressure and that I just need replace O rings there.
at the very end in the video it show the valves clearly working, if you've got a keen eye you would have caught this, the valves are CRITICAL and it would have been beneficial to have explained this to the viewers. Also the word editing needs a little work... other wise a good video, cheers
Another outstanding video.By an amazing coincidence earlier today I was teaching a group of young students about hydraulic braking systems and used a basic animation of a jack to show the principles involved around hydraulic brake force multiplication. This video will be brilliant tomorrow as an extra teaching resource and a great revision tool. Well done. Great stuff.
Using non return valve is good but how can we pump oil back to the reservoir
A very detailed presentation. I understand now how this hydraulic jack is composed of and how it coordinate with each part and function.. A part in the Law of Physics for lifting heavy loads
The technology and knowledge used in developing the tool is simple. Didn't just expect it.
Yes
Well explained and demonstrated.
Sometimes science just seems like magic...like it shouldn't be possible; I understand the principle but still can't shake the fascination...
BOOSTED MY UNDERSTANDING THROUGH ANIMATED CONTENT!!
great video but wouldn't the fluid in the reservoir lower when the jack handle is lifted, not depressed?
Great explanation
This is very useful video. Thank you
I worked for a while in a hydraulics repair shop, and one thing I learned that should be mentioned is to NEVER use brake fluid in a jack... it will turn the seals to mush.
I would like to hear the story behind this
Nice Video, could you please also explain what happens when we release the pressure and the cylinder retracts? Usually, there is another hole at the end of the bigger cylinder what purpose does it serve?
Watched all your videos, very well explained with animation. Please make some more videos on electrical equipments.
very nice video .this is very informative and its helping student of science too .thanks for sharing it .
Well explained ... I am tamil but it is the better in explain ,small drawback is can't fully understand but not much problem
Awesome work
thank you for this vid, i'll drot down in my science notes :) thanks ~
wow! way cool for demonstration... easy to understand...
Anyone else started breathing in rhythem with the last animation?
ruclips.net/video/KkU8WeyhDfU/видео.html
most informative video sir thanks for sharing
Thanks
Thank you so much❤
How do the atmospheric pressure is being maintained in the oil reservoir, can you please explain
good explain
Nossa essa Explicação está muito boa Gostei.
thank you : )
Show release valve too
Using non return valve is good but how can we pump oil to the reservoir?
2s of video. Saw a 3d animation. Clicked subscribe right away :D. Thx for the video
How to release the pressure in large cylinder after usage?
But how does the large cylinder return to its original position?
Is there any fluid inside ??
Great!
nice
Use hydroulic jack for winding up spring of 50000 N force by hand pressed
So we got a better power House for turning the Dynamo and electricity can cook food by microwave oven ???
For narrator's voice 👍👍👍👍
👌👌👌
Give that formula which shows how much uplift possible by human power 😫😫😫😫
How jacks work in exams and for jobs???
Haydrolic jok tecnice raning a two weller 🚲
que pesado loco
But how that jack down???
I have some doubt how to contact you?
Waaaaaaw
Hii
Who’s gonna cop the ps5
油封难搞！
اكو عرب هنا 😂✌️
اي😁
Vel
Great animation; horrendous voice.
Plzzz can you explain in hindi wherever i will unsubsxribe your video
Thanks
How to get (liquid) from the reservoir into the smaller piston through the valve and not replace it with something else?
I mean you can not take any liquid from the reservoir or even open the valve if it’s completely sealed. Unless the reservoir tank shrinks?
What program has been used to create these videos? Really nice animations.
Best explanation of HJ for me. Sawed it for future references. Another explanations confused me. I have leak at top of unit and other explanations mislead me thinking that that area should be without oil. Unit is in floor jack so top is in horizontal position. Now I understand it is reservoir that is NOT under pressure and that I just need replace O rings there.
great video and beautiful explanation...............how does the pressure is released/normalized after pressurization ?
What software you used for make this animation?
Good one. But how it will release the pressure while coming down?
at the very end in the video it show the valves clearly working, if you've got a keen eye you would have caught this, the valves are CRITICAL and it would have been beneficial to have explained this to the viewers. Also the word editing needs a little work... other wise a good video, cheers
Chacchai maza aagiya..😁
though the equations were helpful, the motion image at the end opened my eyes
thank you
I use these to lift up RVs. Always wanted to know how they work exactly. With that said....use jack stands!!
Will it work if the jack is placed horizontaly?
Wonderful brother
Why dont you make electrical animations
post pounder ,post driver working?
please.
Bike Carboredor Working video make please
amazing
Can you do a video on a transmission on a car
Swallowing sound at 2:36 cracks me up
I want the name of this design program, Animation, please
ruclips.net/video/d1YBv2mWll0/видео.html
Muy buena forma de usar el gato hidráulico
Like good
AWESOME
thanks .
Thanks .its a geat work
Good information