Excellent video. The printer keeps track of the fuser's life and (ONLY!) displays the "FUSER LIFE REMAINING" on the WEB INTERFACE DEFAULT STATUS PAGE. You have clearly stated that there is no way to reflash the main board. So if the fuser life is 5% is it worthwhile buying a new fuser? Will the motherboard block the printer when it reaches 0% or will it continue working at infinitum? Do you sell the R714D which is the 240V version or only the 110V? Would the other solution be to replace the controller board from an old machine? Thank you for your kind reply
The 200.32 error indicates Media more than 14 inches long has passed over the manual feeder sensor. Possible causes include multi-sheet feed or pre-staged media in the tray. The multi-sheet feed condition is normally caused by the media feed clutch DELL-N383M sticking engaged and feeding multiple sheets in a row. (Multiple sheets in a row is seen by the printer as 1 piece of paper that is way too long and triggers an error.) Solution replace media feed clutch.
Yes, include instructions on how to reset the counter with the kit. Basically power off, hold the check and right arrow and power on. The config menu will come up and arrow down to reset maintenance counter and press check. Once reset arrow to exit config menu and the printer will reset and come up ready.
The replace PC message is indicating it's time to replace the Photo Conductor or drum. We have these in stock. Here is a link: www.fastprinters.com/ProductDetails.asp?product_id=DELL-330-2663
Please Please Help ME ! ?? Paper Jam 200.32...How do I fix this ? We have 8 of these in our office Del-230DN and We ship them out to be repaired ! Please help me become the Office Printer Knight in Shining Armor?????
Great video, was very helpful when I had to replace the fuser for the first time in 10 years.
Excellent video. The printer keeps track of the fuser's life and (ONLY!) displays the "FUSER LIFE REMAINING" on the WEB INTERFACE DEFAULT STATUS PAGE. You have clearly stated that there is no way to reflash the main board. So if the fuser life is 5% is it worthwhile buying a new fuser? Will the motherboard block the printer when it reaches 0% or will it continue working at infinitum? Do you sell the R714D which is the 240V version or only the 110V? Would the other solution be to replace the controller board from an old machine? Thank you for your kind reply
This video is really helpful. Thanks. I'm able to repair the fuser with the instructions from this video.
Great video, my install went well. Thanks! How do you reset the "Fuser Life Remaining" percentage back to 100%?
A very informative step-by-step video
The 200.32 error indicates Media more than 14 inches long has passed over
the manual feeder sensor. Possible causes include multi-sheet feed or
pre-staged media in the tray. The multi-sheet feed condition is normally
caused by the media feed clutch DELL-N383M sticking engaged and feeding
multiple sheets in a row. (Multiple sheets in a row is seen by the printer as 1 piece of paper that is way too long and triggers an error.) Solution replace media feed clutch.
is there a way we can flash the NV rom on the motherboards to mix and match parts ?
that was excellent - good video and explanations. Thanks!
Thank you for this video, it was very helpful.
Is there a way to reset the maintenance kit counter on this printer once the kit has been installed?
Yes, include instructions on how to reset the counter with the kit. Basically power off, hold the check and right arrow and power on. The config menu will come up and arrow down to reset maintenance counter and press check. Once reset arrow to exit config menu and the printer will reset and come up ready.
My Dell 2330dn always has the message "replace PC kit" on the LCD. Is this what you're doing in the video?
The replace PC message is indicating it's time to replace the Photo Conductor or drum.
We have these in stock. Here is a link:
www.fastprinters.com/ProductDetails.asp?product_id=DELL-330-2663
Frage,wo käuft man das Maintenance Kit oder den Fuser für Modell 2330dn?
Please Please Help ME ! ?? Paper Jam 200.32...How do I fix this ? We have 8 of these in our office Del-230DN and We ship them out to be repaired ! Please help me become the Office Printer Knight in Shining Armor?????
Where do you guys buy your replacement fusers?
The Federal Government buys mine.
We work with the OEM directly and in some cases some overseas suppliers. Visit our store at www.fastprinters.com
Unfortunately there is no way to reflash the main boards.
Thanks. As you know the official Dell service manual is actually for the equivalent Lexmark printer and is useless. Thanks a lot.
nice video
2350*