DIY WiFi / Bluetooth Stereo Speaker Boombox Build
HTML-код
- Опубликовано: 15 апр 2021
- Speaker available for sale 👉 etsy.me/3SAnJZ7
✅ Up2Stream Amplifier - bit.ly/3TiYWI2 / bit.ly/3wZBmbS
✅ Free build plans, in-depth instructions and more - bit.ly/4c7CPx7
Dayton Audio TCP115-4 woofer - parts-express.sjv.io/Zdk2zQ / bit.ly/3VeyLVC
Dayton Audio TD20F-4 tweeter - parts-express.sjv.io/n1Oavo / bit.ly/3TnBium
Parts:
2X 26mm ID (7/8") port - parts-express.sjv.io/QyAYaP / bit.ly/3wyaI9R
Crossovers - bit.ly/3x5PRXg / geni.us/vw2q
DC 24V 5A power supply - bit.ly/3GgmWoK / geni.us/zAiyC
Remote Control - bit.ly/3Qhp1W7 / bit.ly/3vChcRt
Rubber feet - bit.ly/3IjqU2z / geni.us/E2PU4
3mm LED mount - bit.ly/3WLxL9o / geni.us/4DaPp
M4X25 standoffs - bit.ly/3vbI9Pq / geni.us/HeaOo2I
M4X12 screws - bit.ly/3v6OKER
2mm clear acrylic (100x200) - bit.ly/48EZiPb / geni.us/E3RxN
Tools:
TS101 soldering iron - bit.ly/3HUzrI9 / geni.us/owyDm5G
Cordless drill - bit.ly/4bZg5PN / geni.us/A5AZi
Hot glue gun - bit.ly/43nyFNx / geni.us/1dwxqIM
Drill bit set - bit.ly/3S3i6zC / geni.us/ktAK1M
Hole saw set - bit.ly/3YZU8tg / geni.us/hONP
Center punch - bit.ly/3xslc8u / geni.us/o5WBEwB
Wire stripper - bit.ly/4dG6Jt2 / geni.us/6epIs
Step drill bits - bit.ly/3Pe3fU6 / geni.us/xYRx7J
Jig saw - bit.ly/3uWmric / geni.us/D8GC
Orbital sander - bit.ly/3HBOC8O / geni.us/gHqu0W
Wood router - bit.ly/3I7Aplm / geni.us/6okRl
Router circle jig - bit.ly/3P5B75e / geni.us/JvCvO
Flush trim bit - bit.ly/43ggzfH / geni.us/bZRVci5
Forstner bits - bit.ly/35snpjW / geni.us/F6it
Helping hand - bit.ly/3B9mIgt / geni.us/Yyqyte
Hi!
Thank you for checking out one more project of mine. Hope you like this one! Full build plans, parts and tools lists are located in the next steps!
This time I decided to make a non-battery powered speaker that would mostly be used in my living room. I went for veneered sides and a faux leather wrapped front panel. To my eyes and ears the speaker turned out great. I really dig the wood-leather design that got me inspired when I saw the Focal Aria 906's.
Thanks for watching!
- 𝑫𝒐𝒏𝒏𝒚 Хобби
Beautiful. I'd prefer the tweeters to be on opposite sides and far apart though, so as not to lose the stereo separation.
Bluetooth does transmit stereo does it?
@@jimsdad3739 yes it does
It is a mono bluetooth reciever:
8:58
@@OmerTheGreatOne Up2Stream Amps are capable of both Mono and Stereo. This could easily be made stereo and only difference would be making a pair of crossovers and few more cables. I'm not sure one on video is mono tho, part list shows 2 crossovers so that could mean this is actually stereo setup.
you will never get stereo out of 1 small box. Maybe if you tape it to your face..
Nice design evolution/variation of the mk boom. Love the leather. I always thought these need small legs rather than rubber nubs. Gorgeous work!
Totally agree! Thank you a lot!
The craftmanship is amazing! Keep up the good work 👍❤
What an awesome build, thank you for sharing!
Thank you!
Nice job! :)
2:50 Correct use of a hole saw...drill from each side to prevent tear-out.
I like that leather look for the front. It really gives the whole thing a professional standard look.
Thank you a lot!
Workmanship is top notch
Thank you!
Thank you for the video, shows how to make and decorate the speaker boxes in detail.
Couldn't find the schematics following the link. Another thing, for a stereo speaker it is a bad idea to place tweeters one right next to the other, this way there will be no stereo effect.
Vídeo extremamente satisfatório. Parabéns pelo projeto...
Thank you!
Damn, this was beautifully handcrafted, you should start making these for sale.
Thank you a lot! Will try making a few more in the near future.
I also agree friend, This was amazing!😍👏👏
This is a pretty neat little speaker build! One of the best ones I've seen. Good job.
Only thing I might have done is added a battery pack, so you're not tethered to a 24V DC power supply.
Thank you!
I did consider adding a battery pack to make it portable but since my intention was to only use it inside, powering it with a 24V supply is convenient enough. It also saves some space and overall dimensions without the battery pack.
@@DonnyTerek you could do what I did . By using my 18v cordless drill battery externally via a 3d printed battery adaptor ( plenty of choice for most popular brands) use an in-line fuse & terminate lead with your specific power plug. & Job done it's portable, you will lose a little output power due to the lower 18vdc input.
@@idrisjones1453 That is a really good idea. Being able to use a single battery pack for other devices other than power tools is great. The speaker would look a bit bulky with the battery on the outside but at least it would be portable.
Hi Donny, very nice build! Question regarding the remote control: Does it work through the plexi at the backside of the box? I finished my first boombox last week, using the Arylic Up2stream Amp 2.1 board. The board has a 9pin breakout connector where you can connect an external IR sensor. I used a standard LED-shaped one with 38kHz 940nm and put it in the front panel. Works perfectly.
Hi! Thank you! Glad you liked the video.
Yup, the remote does work through the plexiglass. Though I didn't check on how far the remote can still work.
Very nice! You are a great cabinet maker. As always, patience is a virtue!
Thank you very much!
Молодец! Работа которая стоит уважения!
Thank you!
Great job, but you already know that!
Love the way it looks and with 100 watts I'm sure it sounds nice too
Jack SPeaker tv
Love the speaker and your work...attention to those little details...awesome. You really inspire me.
Thank you so much! Truly appreciated.
Seeing you can always warp the enclosure with leathers perfectly, that blown me away
PU/faux leather but still impressive.
Wow, thanks! It did take a few tries to get the hang of it.
You do this job very well, perfect
Thank you!
Parabéns, belo trabalho e ensinamento. Obrigado. Robertson (Brasil)
Thank you very much!
The speaker sounds very clear and balanced, it also looks good. Good job!
Thank you!
Dam! even through my tv, this sounded amazing. The bass sooo good to the ears, no distortion, sharp and strong, just beautiful.
Thanks!
Beautiful! Beautiful project, beautiful result and beautiful video. Well done.
Seriously classy job Donny. Enjoyed watching you build it.
Thank you very much! Glad to see you enjoyed it.
Thanks for including is this incredible build Donny!
Thank you! My pleasure!
pls export some more models to india. diyaudiocart.com have limited stock.Most are out of stock.
Excelente trabajo!
Podrías indicar cómo se realizan las conexiones del amplificador con los altavoces a través de los crossovers y también cómo se conectan los tweeters. Muchas gracias por anticipado.
Hello, thank you! Had to google translate your comment. The connections are really simple: amplifier-crossover-tweeter and woofer . I recommend you also check my Instructables post in the description.
A perfect example of superb creativity...nice sound machine. Love you from India 🇮🇳 ... thanks
Thank you so much!
Great job, as always! 💪🏻
Thanks! Appreciate that!
Awesome Video Donny! We love your speakers!
Thank you so much! Kindly appreciated!
Muito top! Feito com todo cuidado, dá até vontade de fazer também! Parabéns pelo trabalho!
Thank you!
Sensacional muito top 👏👏👏👏🇧🇷🇧🇷🇧🇷🇧🇷 quero uma dessas 😂
Beautifully done two channel boombox not Stereo no space between left and right speakers !
Will sound like mono speakers as the tweeters are very close to each other. Stereo imaging is about separation of left and right speakers.
Those two tweeters in the middle don't give wide stereo, but great build as always 👍
They dont give stereo at all
Thanks!
The speaker does sound great as a center speaker as I intended it to be. I could have mounted the tweeters on the sides of the panel but did not want to keep a blank space where the amplifier goes 😄
@@DonnyTerek If you are using it to play a single channel, as in a center channel, using two tweeters and two midranges does not make sense. A single tweeter and a single midrange would sound much better.
Not only that. I don't think this guy heard of comb filtering. Good build though.
@@wynton416 exactly
Hermoso trabajo, gracias !!!
Thanks!
J'adore regarder ce genre de vidéo c'est toujours très intéressant bravo l'enceinte et superbe
Amazing build!
Thanks mate!
wow ~ 멋진데 ! 이쁘고 소리도 강력하고 ! 수고하셨습니다.
Thank you!
what a magnificent work..
Thank you!
Exelente proyecto tendrás las medidas
Love from India 🇮🇳😉
Thank you!
Hi
@@DonnyTerek hi
Hello
Как все сделано четко и аккуратно!
Beautiful, great video. Great build
Thank you very much!
Love your work.
Camera does the heavy lifting.
Good investment
Subscribed
Thank you so much!
Should have got myself this camera a long time ago.
Welcome!
This talent deserves more than 10million views 🙌💯 amazing work man iam gonna do this soon 😊❤️
Wow, thanks! Best of luck on your build!
Well done!
Thanks!
Only....Perfect Work
Nice! interesting in building one
Thank you!
boa tarde,sou fanático por Jazze e eletrônica ......gostei muito da sua caixa ...meus parabens ,me increvi no seu canal
Thank you!
Wow that looks awesome!
Thanks!
A lovely piece of work.
Thank you!
Excellent beautiful finished.
But: for any modern sound box or speaker cabinet, it's not compulsory, but it's much better to have atleast two bass boosting passive radiators of the same diameter of the woofers fitted.
Superb quality and workmanship. Speechless.
Thank you so much!
The tweeters need to be at the outer edges at least, if not angled slightly away from facing dead ahead. This won't give any stereo image at all.
Consider the cost of the build and that almost everyone with hobby skills should be able to make such a thing. This is not a HiFi speaker costing thousands of $.
awesome work by the way! that thing is a work of art
Thank you very much!
Good job as always
Thanks again!
Perfect 👍
Nice speaker!!!
Thanks!
Really awesome job! Did a similar project and included a battery pack so i can charge and use the speaker anywhere. It sounds great however everytime i turn it on, i hear a loud popping sound from the speaker, i guess i will need to put something between the power supply and switch to eliminate the startup popping sound?
That happens in car stereos if you don’t have soft power to your amp and it turns on quickly.
You can solve that problem with connecting huge capacitors between power rails.
How nice..... that was very satisfying.
Glad you enjoyed it! Thanks!
Great job! With all that work I probably would’ve sprung on better drivers. Also countersinking the plexiglass in the back would’ve been a nice look.
Thank you! Did not want the build to go over the roof with the price of more expensive drivers.
Daytons stuff isn't too bad tbf
Heard some fairly high end sounding systems using Dayton drivers... At the end of the day the amps crossovers and box design play a massive role in a speakers sound
Do you have a link for the vinyl you used?
Its Amazing, great job!!! Bro ✌️
Thank you so much!
Sir You are best Amplifier makers please MAKE BUDGET speaker box
Thank you! Will try soon.
Why two tweeters? It would cause a lot of issues with comb filtering. Really good workmanship!
Thank you! I just wanted to experiment.
I really like this piece.
Is there a wood cutting pattern?
Thank you!
You can find the free build plans in the description of the video.
идеально сделано как-будто с магазина
Thanks!
Gorgeous. Just mesmerizing👏
Thank you!
this is amazing sir
Thank you sir!
DUDE YOU ROCK !!!!!!!!!!!!!!!!!!!!!!!!!!! I just bought a TV speaker bar I hooked It up to my computer I get so much feed back from the power plug you cant even listen to it ! is there anything I can do ????????
the title of this video should be how to paste and wrapped 5he wood for the proposed speaker..,😅😂
Красиво !
Мастер!
Parabéns
Waiting for another project , 😁😁😁 free speaker please watching from Philippines
Thank you!!
Welcome sir Dony
สวยจัด
hi Donny, i m really interested in making this speaker, but wanna use a setup that utilises 6inch wooferx2 , 3inch midrangex3 , and 1inch tweeterx2 with a continuos 120 w power output. with a similar amplifier like u have used , but with my specification. can u help me with the cabinet dimensions and its port dimensions?
doing kind of a wacky bluetooth speaker build out of one of those old massive lense flashlights with a single 5.25” coaxial. looking for a simple 25-30w mono w/ bluetooth capabilities. any recommendations on where to find an amp board?
Nice made, but there will be not much Stereo on this. But it could be used as center speaker.
work of art
Really cute system
Really best good working speaker bt diy kit.
The most satisfying speaker diy video
Thank you!
Cute bluetooth speaker 👍
Thank you!
Basically the most incredible I've seen in my entire life. And I do some serious woodworking. I'm super in to speaker systems too so this is my whole world perfected.
Thank you so much!
Спасибо большое за видео приятно смотреть
well that´s expensive
I always get some relax when I was watching videos like this great job dude take it personally because I didn't like it's really looking impressive and I bet you spend lot of time to build it 👊😎 so keep going forward with it
Wow, amaizing in making work. 🌹👍🌹
Thank you!
Can I have the name of that foam tape you use to wrap the cables to keep the together/rattling ? Or where can I buy it?
This is not a DIY. This is Art.
Thanks!!
Very nice work. Greetings from sunny Jamaica.
Thank you!!
Really well done, great works looks awesome! But it never has 100 watt, never..
Thank you! Most likely not, just stating the manufacturer's rated output.
Perfectionist 👍👍
Thanks 👍
Awesome design, two such speakers would have been awesome, L + R speaker cabinets and should have lined the speaker inner walls with thick glass wool padding.
Thanks!
Yay new video!
Hi! Will these speakers be enough for a party outside?
I need that table with cutter, what's brand? Amazing woodwork skills bro.
Thanks bro! I will try to check the brand of the table saw when I am at the workshop.
Love from south korea!
Thanks a lot!
Great job. Can I ask what is the foam (at 8:43 in the video) that you have rapped around the wires called or where can I get it.
Thank you! These crossovers came assembled and already wrapped in foam. I'm actually not sure where you could get the foam, I guess an option would be to get some adhesive foam and wrap the cables in that.
Very beautiful!
Thank you!
What is the name of this material used to make the box? It doesn't look like wood to me
Very nice!
Thank you! Cheers!