AtomRC Dolphin - Li-Ion Endurance Test at Cotter Dam

Поделиться
HTML-код
  • Опубликовано: 15 ноя 2024

Комментарии • 50

  • @Thunderbyrd.
    @Thunderbyrd. 3 года назад +3

    Nice flying, incredible scenery, a lot of fun watching the video, going over the dam was cool.

  • @michaelwhinnery164
    @michaelwhinnery164 3 года назад +1

    Footage is amazing,
    Can't tell how fast you're moving until you flew under the bridge.

  • @wattage2007
    @wattage2007 10 месяцев назад

    Bloody marvellous! Going to have to get one of these, looks like the king of efficiency :)

    • @ZaksterBlue
      @ZaksterBlue  10 месяцев назад +1

      One and a half years later, still my favourite plane. 🙂

  • @EnglishTurbines
    @EnglishTurbines 3 года назад +3

    Another day in FPV heaven...lol...It's an efficient cruiser for sure. Remove the GoPro for more battery capacity...🤔🤔🇬🇧

  • @dronepilot260rc
    @dronepilot260rc 2 года назад +1

    Nice! Just got mine in. Was thinking about running a 2306.5 1400KV. I also have a 2306.5 1900kv both on 7042 props. Can't wait!

    • @ZaksterBlue
      @ZaksterBlue  2 года назад +1

      The 1400kv might be on the slow side unless running 5s?

    • @dronepilot260rc
      @dronepilot260rc 2 года назад +1

      @@ZaksterBlue yes sir 5 and 6s

    • @ZaksterBlue
      @ZaksterBlue  2 года назад +1

      @@dronepilot260rc in that case, should be great!

  •  8 месяцев назад

    ecxellent flight and really great location in Australia 💯.....big thumbs up and greetings from Germany👍👍

    • @ZaksterBlue
      @ZaksterBlue  8 месяцев назад

      Thanks for the great comment! 😊

  • @v55evo
    @v55evo 3 года назад

    just beautiful flight with matched music ! again, nice video ! I was the first guy ( I believed ) import the Dolphin way before banggood sell it . then I am also the first guy crashed it ! ha........! Had my 3rd one ready to fly, changed set up a bit . from T-motor 2310 2200kv to 3BR 1900kv, and just ordered a 3.5h 4s Li-ion ....$20 with free shipping but by Ocean, takes months !

    • @ZaksterBlue
      @ZaksterBlue  3 года назад

      That's cool! I'm leaving this 2207-1900kv on for now but already have the upgrade ready, a brotherhobby 2507-1750kv to spin the 7" prop easier.
      Be careful with the small 3.5A Ion, when you get down to 3v per cell it will struggle to deliver current and any higher throttle will sag the voltage, so your trip home will be slow. Any headwind then becomes a problem.

    • @AlphardV55WR35
      @AlphardV55WR35 3 года назад

      @@ZaksterBlue THX for the heads up bout' the lon down to 3v per cell and ...need to becareful ! by the way , you know Dolphin has a brother now, will soon on Banggood, much bigger brother but nice design ( same designer )

    • @ZaksterBlue
      @ZaksterBlue  3 года назад

      @@AlphardV55WR35 yes, I saw some videos of the Mars. I'm really happy with the Dolphin size and weight, which makes landing in tight spaces easy and less prone to damage.

  • @hoffmanfpvprojects15
    @hoffmanfpvprojects15 2 года назад +1

    The kangaroos already want to drive this guy off their territory XD

  • @jwtfpv8957
    @jwtfpv8957 3 года назад

    Love the road on the ridge line. :)

  • @NoFlyDrone
    @NoFlyDrone 3 года назад

    Awesome spot to fly. So many things to see👍

  • @MrMightyytau
    @MrMightyytau 3 года назад

    Wow that was impressive thanks for sharing

    • @ZaksterBlue
      @ZaksterBlue  3 года назад

      Thanks for the comment! 😀

  • @madladdan
    @madladdan Месяц назад

    Is 4s better than 6s for long range on this frame?

    • @ZaksterBlue
      @ZaksterBlue  Месяц назад

      @@madladdan possibly, never tried 6s!

  • @rodeopilot7495
    @rodeopilot7495 3 года назад

    Greta video , how do you compare this plane vs the reptile dragon?

    • @ZaksterBlue
      @ZaksterBlue  3 года назад +1

      A bit early for me to say. More efficient and faster for sure, but will get knocked around by wind a bit more. Ask me again in a month. 😀

  • @willyfernandez6019
    @willyfernandez6019 2 года назад

    Very smooth flying with beautiful scenery... Are you using Inav or Arduplane or manual flight?

    • @ZaksterBlue
      @ZaksterBlue  2 года назад +1

      INAV acro mode 99% of the time.

  • @bobfin4291
    @bobfin4291 2 года назад

    I take it your mob of mates had moved on for landing

  • @don0219
    @don0219 2 года назад

    nice props, where can i find them

    • @ZaksterBlue
      @ZaksterBlue  2 года назад +1

      I got them from BG.
      2 Pairs HQProp DP7X4.5 7045 7 Inch 2-blade Durable PC Propeller compatible POPO 2CW+2CCW
      banggood.onelink.me/zMT7/75d9a827

    • @don0219
      @don0219 2 года назад

      @@ZaksterBlue great, thank you

    • @don0219
      @don0219 2 года назад

      @@ZaksterBlue by the way, i got the first version of the eco motor, same size and kv. so what esc do you fly with?

    • @ZaksterBlue
      @ZaksterBlue  2 года назад +1

      @@don0219 I'm still using a HAKRC 35A as I don't think the 1750kv motor I'm now using and hqprop 7x4.5" draws any more than this. I did buy a 50A FlyColor ESC but haven't bothered to change it.

    • @don0219
      @don0219 2 года назад

      @@ZaksterBlue thanks

  • @blackbirdboy1
    @blackbirdboy1 3 года назад

    Impressive, though it was dead calm looking at the reservoir, as there were no ripples at all. What's the airframe like in the wind? Still, 40 mins is a long time for such a small airframe & I'm guessing you could mount the motor on stand-offs so CG can be achieved with more battery if you wanted. Is this the first time you've used a Vista? I have 2 Air Unit, but so far have only barely used 1.

    • @ZaksterBlue
      @ZaksterBlue  3 года назад +1

      It's pretty good for its size. You can see from the DVR snippets that it got a little rough in the hills, but I didn't need to keep correcting roll like I have to with the Dragon in ACRO mode.
      Yes, first time with a Vista on a range plane. Seems fine but I need more cooling still.

    • @blackbirdboy1
      @blackbirdboy1 3 года назад

      @@ZaksterBlue Yeah, fan or mount on outside. Both have there merits & disadvantages

  • @MOKKAPA_FPV
    @MOKKAPA_FPV 2 года назад

    What engine is on this flight?

    • @ZaksterBlue
      @ZaksterBlue  2 года назад

      Emax Eco II, 2207-1900kv. I've upgraded to 2507-1750kv now. See my build update video.

  • @JoshFisk
    @JoshFisk 3 года назад

    It looks like you're either on a public channel for your dji system or you haven't updated it in a bit. You should be getting 50mbps bitrate at closer ranges. Also, what 21700 cells did you use for your pack?

    • @ZaksterBlue
      @ZaksterBlue  3 года назад

      Hi Josh, I've been using 25mbit as it hangs on better and recovers faster when you're at the fringes of signal. And also necessary when flying with others on analogue. TBH, I've been forgetting I have the option to bump it up when I do fly on my own and closer range!

    • @ZaksterBlue
      @ZaksterBlue  3 года назад

      As for battery, P42A. See my video: ruclips.net/video/Dnd8vi6fNzk/видео.html

  • @DimkaTDS
    @DimkaTDS 3 года назад

    how max speed in this setup?

    • @ZaksterBlue
      @ZaksterBlue  3 года назад

      About 140 kph with the small 1900kv motor. You would need higher kV motor and smaller prop to get more speed.

  • @statesmanls1
    @statesmanls1 3 года назад

    Do you have a total distance on the flight?

    • @ZaksterBlue
      @ZaksterBlue  3 года назад

      Unfortunately not, as I unplugged without taking note of those readings.

  • @julianhumphrey4843
    @julianhumphrey4843 2 года назад

    stunning flight mate, so i have a white one coming plan to run 2650mah 4s lipo, or if to heavy then 2200mah 4s, but what motor, i have SS 2214 1400kv or racerstar 2207 1600 and 2200kv, would like to use HQ 7x4.5 as they are decent props

    • @ZaksterBlue
      @ZaksterBlue  2 года назад +1

      Try the 2207 1600kv, it will be lighter and fine with that prop, assuming 2-blade.

  • @andron1967
    @andron1967 3 года назад

    Дайте пиды и рейты дельфина