I bought the SX-9860 150Wx2 for $20 at a swap meet. They will drive most large speakers very well. If they are paired with good speakers they will sound very good -Speaker quality is key Most average users wont notice its shortcomings. They do require an activation signal to turn on applied to the 2 wire cord. -12V DC @ 500mA Black and White (+) Positive Solid Black Wire (-) Negative Thank you for sharing this video Angelicaaudio
can you pls elaborate further? i'm using a universal adapter and dont want to get the polarity wrong what cables did use and what did you connect to what
corect me if i am wrong /that relay is for speaker protection ,not power /that conector(in your hand ) is for the other realay on the board of the transformator )put it on 12v cc and it s start
You Sir, are INCORRECT, the relais that switches the unit on is located on the side of the unit, the relais you are referring to is the speaker protection relais which obviously switches on when you put 12V on it because the OTHER relais is activated. The only thing you need to do in order to operate it without 12V is put a switch between the NO legs of the relais.
Sorry for the question. I bought an amplifier like this and before connecting it to 12V, I'm wondering what the third wire that goes to the amplifier board and ends with the red connector is for?? There are two + and - for the relay that turns on the amplifier, but I don't know what the third one is that goes along with them?
how can I connect that 12v connector to a more common 1/8 inch 12v remote control port? (the more standard ones look exactly like a standard 1/8th inch headphone jack) and they are often labeled "remote control" or "remote trigger" on the back of pre-amps and receivers).
I'm new to this so sorry for stupid question. The output labeled as REAR SPEAKERS, what is the purpose and usage of those ? I assumed its more outputs for speakers but if i add speakers to them nothing happens ? Am i missing something ? Thanks for info !
I know this answer it’s 3 years later but I know what is The solution, I have The full sistem at home in Italy and you need to plug The red and white cable(rca) from The amplifier to The sharp system The pre-amplifier on that there is a button where you can activate audio surround so your rear speaker will work and bass x tha improve The bass, I had The same problem because my pre-amplificar stoped working hope One day it will work again, HI from Itali!
Hello angelicaaudio I just purchased an amp of this model and I'm having an issue where I cant power it on.there is something going on with your video where It cant be viewed hope this gets fixed soon I wanna be able to see where you bypassed the cable to connect to other components seeing that this is a stereo combo setup.
Zdravím, na začátku jen upozorním že zesilovač je stavěný na 8ohm reproduktory a ne jak jste říkal že dává výkon 2x320W do 4ohm. To by rychle umřel. Ale mám dotaz, nezjistil jsem na které ze tří pinu se zapojí + a - a jestli takto budou hrát i zadní kanály. Ten třetí vodič totiž vede na desku zesilovače a tím by se měly spínat i výstupy pro zadní reproduktory. Díky za radu.
Díky za zprávu. Další výstupy jsem myslím nezkoušel, tak nevím, zda jsou takto spínané. Nejedná se ale o čtyřkanálový zesilovač, ale pouze stereo - tj. v případě zapojení 4 ks osmiohmových reprosoustav bude výsledná impedance reprosoustav 4 ohm na každém kanálu. Pokud se podívám na datasheet STK 4050II tak máte pravdu - je určen pro 8 Ohm. Ovšem pokud zapojíte 4 reprosoustavy, tak holt poběží na 4 Ohm :-/ Dostupné info z internetu: Modell: SX-8800H(GY) Sinusleistung an 4Ohm: 2x320W Sinusleistung an 8Ohm: 2x200W Leistungsaufnahme: 1155W Abmessungen (B/H/T): 43 x 23 x 33 cm Gewicht: 15 kg
Hi from Romania! I have same amplifier but dont work...i dont know what to do..can you help me?do you have a what's up or a facebook page?I dont know what to do with it..al fuses ok..but no sound..
Po dobu natáčení si vypínejte telefon!!! To neustálé cinkání ruší a vúdči divákům je to bezohledné. Já to taky na akcích důsledně dělám. Neexistuje. aby mě někdo otravoval v průběhu třeba nějaké přednášky. Když je v sále hrobové ticho. Každý ať si zavolá pak. Lidi si na to brzy zvyknou. Též vypínat kameru a vyřizovat si hovory v průběhu frekvence je vemi neslušné. Chovejte se jako profesionál!!! Kdybych toto dělal u nás, tak mě vynesou v zubech.
JJ. Děkuji. To bude nejlepší. Je třeba naučit lidi, že nejste v pozoru kdykoliv si vzpomenou. Pak jste otrok a ne specialista prodeje. Však zavolají znovu, když je to důležité. Když už ne, pak jen otravovali a vlastně nic nechtěli. Na maily se též má odpovídat až druhý den. Pak to vypadá, že člověk jen sedí a nic nedělá.
Dommage que je ne comprends pas la langue et que ne vous montriez la source pour comprendre comment le brancher et nous faire suivre pas à pas les connexions ?
Necesitás un preamplificador para darle señal de entrada y una fuente de 12 volts para que encienda el amplificador, yo también tengo el mismo y suena muy bien, de hecho quiero conseguir otro.
Thanks for your comment - you sure did not have this amp. Looks scrappy but sounds very, very good :-) ... much more better than a lot of "valued" HiFi amplifiers :-) :-)
@@igorkukuruc6228 see the datasheet of the inner parts,,, weight of the amp about 15kgs,,, I do not know if the tech.specs. of the parts in datasheets are real, but this amp is strong enough and much more better sounding than a lot of valued amplifiers :-) :-) :-) ... do not judge people by the clothes :-)
I bought the SX-9860 150Wx2 for $20 at a swap meet.
They will drive most large speakers very well.
If they are paired with good speakers they will sound very good -Speaker quality is key
Most average users wont notice its shortcomings.
They do require an activation signal to turn on applied to the 2 wire cord.
-12V DC @ 500mA
Black and White (+) Positive
Solid Black Wire (-) Negative
Thank you for sharing this video Angelicaaudio
Thanks for your comment.
can you pls elaborate further? i'm using a universal adapter and dont want to get the polarity wrong what cables did use and what did you connect to what
you make nice videos with clear explanations. I subscribed to your channel. Greetings from venlo Netherlands
Thank you
corect me if i am wrong /that relay is for speaker protection ,not power /that conector(in your hand ) is for the other realay on the board of the transformator )put it on 12v cc and it s start
Cable with connector is from the relais.... and the relais is 12V switch on/of of the amplifier. No speaker protection.
Angelicaaudio if you look the diagram it is speaker protection
If you connect 12V it switches the relais and switches the amplifier on
You Sir, are INCORRECT, the relais that switches the unit on is located on the side of the unit, the relais you are referring to is the speaker protection relais which obviously switches on when you put 12V on it because the OTHER relais is activated. The only thing you need to do in order to operate it without 12V is put a switch between the NO legs of the relais.
Sorry for the question. I bought an amplifier like this and before connecting it to 12V, I'm wondering what the third wire that goes to the amplifier board and ends with the red connector is for?? There are two + and - for the relay that turns on the amplifier, but I don't know what the third one is that goes along with them?
Thanks for your comment. Unfortunately I do not remember, the video is very old and amplifier sold.
how can I connect that 12v connector to a more common 1/8 inch 12v remote control port? (the more standard ones look exactly like a standard 1/8th inch headphone jack) and they are often labeled "remote control" or "remote trigger" on the back of pre-amps and receivers).
Thanks for comment, unfortunately I do not know.
I'm new to this so sorry for stupid question. The output labeled as REAR SPEAKERS, what is the purpose and usage of those ? I assumed its more outputs for speakers but if i add speakers to them nothing happens ? Am i missing something ? Thanks for info !
I know this answer it’s 3 years later but I know what is The solution, I have The full sistem at home in Italy and you need to plug The red and white cable(rca) from The amplifier to The sharp system The pre-amplifier on that there is a button where you can activate audio surround so your rear speaker will work and bass x tha improve The bass, I had The same problem because my pre-amplificar stoped working hope One day it will work again, HI from Itali!
Hello angelicaaudio I just purchased an amp of this model and I'm having an issue where I cant power it on.there is something going on with your video where It cant be viewed hope this gets fixed soon I wanna be able to see where you bypassed the cable to connect to other components seeing that this is a stereo combo setup.
I hope you can see it in video
Zdravím, na začátku jen upozorním že zesilovač je stavěný na 8ohm reproduktory a ne jak jste říkal že dává výkon 2x320W do 4ohm. To by rychle umřel. Ale mám dotaz, nezjistil jsem na které ze tří pinu se zapojí + a - a jestli takto budou hrát i zadní kanály. Ten třetí vodič totiž vede na desku zesilovače a tím by se měly spínat i výstupy pro zadní reproduktory. Díky za radu.
Díky za zprávu. Další výstupy jsem myslím nezkoušel, tak nevím, zda jsou takto spínané. Nejedná se ale o čtyřkanálový zesilovač, ale pouze stereo - tj. v případě zapojení 4 ks osmiohmových reprosoustav bude výsledná impedance reprosoustav 4 ohm na každém kanálu. Pokud se podívám na datasheet STK 4050II tak máte pravdu - je určen pro 8 Ohm. Ovšem pokud zapojíte 4 reprosoustavy, tak holt poběží na 4 Ohm :-/
Dostupné info z internetu:
Modell: SX-8800H(GY)
Sinusleistung an 4Ohm: 2x320W
Sinusleistung an 8Ohm: 2x200W
Leistungsaufnahme: 1155W
Abmessungen (B/H/T): 43 x 23 x 33 cm
Gewicht: 15 kg
Anyone know how to turn on the sx9680 by sharp
Hi from Romania! I have same amplifier but dont work...i dont know what to do..can you help me?do you have a what's up or a facebook page?I dont know what to do with it..al fuses ok..but no sound..
Did you switch the relais on?
What is It's THD rating?
the distortion rating
Unfortunately I do not have the exact technical data of this amp. Maybe helps uncle Google :-)
200wattsRms /Peak 800watts .Thd10% harmonic distortion at 1.5% per channel .Mono symplex system circuit .
2x130 or 2x120 Sinus AFAIK.
Whats the polarity of the switch cable?
Unfortunately I do not remember, but you can try it. By 12V you will not destroy the relais ... in one position it will work, in bad position no.
Po dobu natáčení si vypínejte telefon!!! To neustálé cinkání ruší a vúdči divákům je to bezohledné. Já to taky na akcích důsledně dělám. Neexistuje. aby mě někdo otravoval v průběhu třeba nějaké přednášky. Když je v sále hrobové ticho. Každý ať si zavolá pak. Lidi si na to brzy zvyknou. Též vypínat kameru a vyřizovat si hovory v průběhu frekvence je vemi neslušné. Chovejte se jako profesionál!!! Kdybych toto dělal u nás, tak mě vynesou v zubech.
Díky za komentář. Dám si na to pozor. Budu nechávat při natáčení telefon nahoře u počítače.
JJ. Děkuji. To bude nejlepší. Je třeba naučit lidi, že nejste v pozoru kdykoliv si vzpomenou. Pak jste otrok a ne specialista prodeje. Však zavolají znovu, když je to důležité. Když už ne, pak jen otravovali a vlastně nic nechtěli. Na maily se též má odpovídat až druhý den. Pak to vypadá, že člověk jen sedí a nic nedělá.
Grasirs
Thanks for your comment
Dommage que je ne comprends pas la langue et que ne vous montriez la source pour comprendre comment le brancher et nous faire suivre pas à pas les connexions ?
Please write english, thanks.
Qual valor de som desse modelo completo
Please write english, thanks.
Нello,I am from Ukraine,works 4Om, good or not?
See the detailed photos of the backside.... time 16:13 .... rated impedance of the speakers should be 8 Ohms
nice
Thanks for your comment.
😍😍😍🤩🤩🤩🤑🤑🤑🥸😜👍👍👍👏
Yo. Tengo. El. Mismo. Y. Cómo. Funciona
Necesitás un preamplificador para darle señal de entrada y una fuente de 12 volts para que encienda el amplificador, yo también tengo el mismo y suena muy bien, de hecho quiero conseguir otro.
Uuu
This Amp is waste of time RMS 200watts
Thanks for your comment - you sure did not have this amp. Looks scrappy but sounds very, very good :-) ... much more better than a lot of "valued" HiFi amplifiers :-) :-)
No way real rms 200W :D
@@igorkukuruc6228 see the datasheet of the inner parts,,, weight of the amp about 15kgs,,, I do not know if the tech.specs. of the parts in datasheets are real, but this amp is strong enough and much more better sounding than a lot of valued amplifiers :-) :-) :-) ... do not judge people by the clothes :-)
The weyght is not in this type of amp on 1st place. Look on type of power amp IO.... STK?
You call me