3 Story Pool Freeze in Winter Temperatures | House Build #9

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии • 369

  • @buildshow
    @buildshow Год назад +22

    Holy Cow this is amazing!!! New subscriber here. Can’t wait to watch this whole BUILD!

    • @UOAPlays
      @UOAPlays Год назад

      Wow, my favorite Building Science guy is here watching my favorite engineer!

  • @Jazz3006
    @Jazz3006 Год назад +60

    Mike is spending more on forms than most people do on an entire house! It's going to be a REALLY cool end result though!

    • @TrevorDennis100
      @TrevorDennis100 Год назад +3

      Timber is crazy expensive here in New Zealand now, and that's if you can even get it. It's the same with steel. The last project I did, the steel cost me 50% more than I was expecting based on previous purchases. So Mike's build is surely going to be eye wateringly expensive.

    • @zteaxon7787
      @zteaxon7787 Год назад +2

      @@TrevorDennis100 Utah is not the same as New Zealand

  • @tombazemore1098
    @tombazemore1098 Год назад +15

    I know there is a time delay for Mike to post these videos. But, a few weeks ago, I went to the local box store to get a couple of bags of cement to set some fence posts. The store was completely out. When I asked an employee about the shortage, he said that some dude In Utah had been buying all available cement in the western US. 😊
    Amazing stuff, Mike!

  • @opieshomeshop
    @opieshomeshop Год назад +115

    Can’t wait to see where the negative sub wave warp field propulsion cells are going because we all know the house will fly as well and be able to orbit the earth.

    • @SkyWriter25
      @SkyWriter25 Год назад +9

      NSWW propulsion is so 2022. Mike will, obviously, use a Quantum Tunneling Universal Coordinate Phased Array so that the house will exist at all possible location at the same time.

    • @opieshomeshop
      @opieshomeshop Год назад +2

      @@SkyWriter25 Oh, dam him!!!!! Where did he get one those!!!! 🤣🤣🤣😆😆😆

    • @SkyWriter25
      @SkyWriter25 Год назад +5

      @@opieshomeshop He invented it. Where do you think he gets all that concrete? A QTUCPA can be tuned to move matter from any point in any multiverse to any other point in any multiverse. Right now, in other multiverses, there are 4,397 versions of some poor concrete delivery truck driver trying to explain just where the heck his load went.

    • @opieshomeshop
      @opieshomeshop Год назад +2

      @@SkyWriter25 LOL!!!!!! Thats just too funny!!!

    • @EMJ31
      @EMJ31 Год назад

      Agreed

  • @WA4OSH
    @WA4OSH Год назад +86

    The engineering behind this project is incredible

    • @timwatkins6559
      @timwatkins6559 Год назад +8

      Cost too

    • @Asta-wl8jz
      @Asta-wl8jz Год назад +1

      @@timwatkins6559 Yup...the engineering is incredible. I doubt we'll ever hear the entire cost of the house but it's got to be many many millions. Maybe he can write part of it off as a business expense since he's building it "for" the channel...lol.

    • @barrydoman1749
      @barrydoman1749 Год назад +5

      And waste😮

    • @WA4OSH
      @WA4OSH Год назад +1

      @@timwatkins6559 A swimming pool with a moving floor is not cheap. But to a poor man a tent is expensive. I think what Mike learned on this project is worth the expense. Think of the industrial applications of being able to raise the floor in a tank. Eg. How would you clean particulate matter from the bottom of an industrial storage tank that you can't scuba dive into? What if you wanted to learn s new way to do this?

    • @WA4OSH
      @WA4OSH Год назад +4

      @@barrydoman1749 Mike is a master at philanthropy. The temporary wall elements probably will become roof rafters for homes for the needy. I enjoy watching Mike for his problem solving ability. I only know Mike through his actions. Waste will be minimal.

  • @dalereed2626
    @dalereed2626 Год назад +1

    Mike you are a Madman . I can't wait to see the end results .

  • @timothyrye1865
    @timothyrye1865 Год назад +24

    I love how much you talk about the engineering that's going into the build. Most people ignore engineering and focus on finishes.

  • @JeremyWallaceSnackums
    @JeremyWallaceSnackums Год назад

    Mike is a particular type of person that is absolutely necessary to Humankind. No matter the individual viewpoints, politics, preferences, or beliefs, a better world will be attainable because of people such as the Patey's.
    Their on a path to use less resources to accomplish more while a better version of more simultaneously.
    Best part is, THEIR CAPABLE OF DOING IT! Proving their methodology to be accurate.
    Inspiration in advancement of technology and materials is quite astonishing to learn for free if a person just takes a breath to pay attention.

  • @goatflieg
    @goatflieg Год назад +5

    The best thing about watching any of your videos for me is watching you work through every possible engineering variable on such an incredibly complex build, and you just keep checking of what-ifs and maybe-we-coulds until every box is checked. Eventually it gets to the point that you've answered every question and you run out of ways anything could go wrong, and you know the design is complete. Then you build it exactly as designed, down to every spec and tolerance. Very satisfying to watch.

    • @garyg7145
      @garyg7145 Год назад

      Setting the variable spandecks in 30 mins is proof of that. It would take most of that long just to do the rigging on them. Precision indeed.

  • @michaelpetz5169
    @michaelpetz5169 Год назад +12

    Mike, I love your energy and passion for designing, and engineering new things! Everyone knows there are simpler ways to build and live, but you exercise who mind, body, and soul into remarkable tangible expressions of your being.

  • @freebird7284
    @freebird7284 Год назад +6

    we really appreciate all the effort you're putting in to document and include us in this built, it's great!

  • @pfd_mark_taylor
    @pfd_mark_taylor Год назад +4

    I love Saturday morning cartoons with Mike

  • @ivicamilosavljevic4706
    @ivicamilosavljevic4706 3 месяца назад

    I like to collaborate with such type of professionals...it's rare today... it happens, but not often. Full respect sir!

  • @loganlm10
    @loganlm10 Год назад +4

    I’m going to school for construction management so I really enjoy these videos

  • @NicholasSchepis
    @NicholasSchepis Год назад +1

    I discovered this series and your channel yesterday as I searched about building an unusually deep indoor swimming pool in a home. As someone who has always loved freediving it's been an interest of mine and something I've always envisioned for my dream home build when the day comes. This is an incredible project you're working on. I love the extent of over-engineering on this build and I'm very excited to see the finished home. I'm also very into airplanes and other engineering so very glad I found your channel. I'm subscribing and will follow along for the rest of the journey. Thank you for sharing.

  • @danipavei
    @danipavei Год назад +3

    I love your detailed analytical approach to every detail!

  • @bobdiederich7087
    @bobdiederich7087 Год назад +8

    You never fail to impress me, thanks Mike.

  • @07decker
    @07decker Год назад

    I can just imagine all the stuff that goes on in your head when it hits the pillow.
    You are amazing Mike, much respect for your intellect and enthusiasm.

  • @seanprice8271
    @seanprice8271 Год назад +5

    Thanks for taking the time to document this build, very cool!!🤙

  • @LeeMooEez
    @LeeMooEez Год назад

    The engineering on this house is mega 😍😍😍😍😍😍

  • @gyclay
    @gyclay Год назад +2

    This is right on the edge of my ability to comprehend the design and execution of this project. Pretty much like any other Mike Patey dreamt up endeavor. I'm as hooked on this one as I was when I first followed the Draco project. I can't decide if Mike's brain is a curse or a blessing for those around him. It's definitely a interesting ride for sure.

  • @chrispbacon550
    @chrispbacon550 Год назад +8

    I deliver concrete, mixer driver, so I know how much 10 yards of concrete costs. Not to mention the pump truck, labor, materials etc etc. I’ve done the math and so far you’ve spent 1 BILLION dollars!!
    Love watching this build and
    I can’t wait to see this house finished. Absolutely a work of art! Keep it coming.

    • @MJTAUTOMOTIVE
      @MJTAUTOMOTIVE Год назад +1

      Get Your hand off it Buddy.

    • @patheddles4004
      @patheddles4004 Год назад +1

      About $1k-$1.5k delivered for 10 yards of concrete, yeah? So if his pours have added up to somewhere under 1000 yards, then we're looking somewhere in the realm of $100k worth of concrete.
      Still a whole lot of concrete though.

  • @Hermandbl7
    @Hermandbl7 Год назад +2

    My Rule of Thumb for my home building projects is, "When the drywall is finally mud and taped, we are about halfway in the build." Mike is not even close to starting drywall. Still, this is an amazing design and I admire his ambition and I am optimistic he will have a fantastic structure/sculpture when he finally puts the key in the front door.

  • @whatnextjoe
    @whatnextjoe Год назад +3

    Your killing again now I can't wait to see the cabin you might build ( 17:15 ) with the lumber your taking out, Here goes another year of Mike Patey and I'm loving it. Thanks for sharing

  • @mann5353
    @mann5353 Год назад

    I got hooked on these dream home build of yours. Thank you...

  • @JakobVarming
    @JakobVarming Год назад

    17:25 ANDERSEN windows! Great choice of supplier!

  • @MrHeavyzz4
    @MrHeavyzz4 Год назад +4

    Hell of a job. Keep the great videos coming.

  • @Utahforrest
    @Utahforrest Год назад +15

    I love how in all of your engineering plans with aviation or other projects you show a spec/minimum and then always basically double it haha

  • @Crewsy
    @Crewsy Год назад +2

    One would think that with a project as amazing as this that Mike would show a little bit of enthusiasm and excitement. 😉
    You can certainly see pride in workmanship when temporary work is neater that most subdivision final work. You have an amazing crew of people Mike. 👍🏻👍🏻👍🏻

  • @sketchyfabco
    @sketchyfabco Год назад +3

    8"-12" is actually 50% more. Looks sick!! Crazy strong.

    • @patheddles4004
      @patheddles4004 Год назад

      Yeah, though 12"-8" is 33% less. But yeah hella strong.

  • @heartsky
    @heartsky Год назад

    Mike living his best life, always inspiring to watch!

  • @tomenglish8554
    @tomenglish8554 Год назад +3

    Good to see progress. Keep it up. We all love the knowledge being passed on.

  • @pursiju
    @pursiju Год назад

    Dynamite bend redundancy! You folks have earned being at ease now.

  • @bburrellmusic
    @bburrellmusic 6 месяцев назад

    I’ve watched every video so far 😂🔥🔥 I just love the breakdowns and progress!!! I am hooked!!! 🧠💡🤓

  • @robertjones9723
    @robertjones9723 Год назад

    I watch a LOT of RUclips and have to say this is one of the most interesting and cool builds on here right now!!! Keep up the great work!

  • @ernie5229
    @ernie5229 Год назад +3

    I would much rather see your work footage (not sped up) and then have you do a voice-over explaining what is happening. The way you do it now, it's almost like a podcast. There isn't much to look at. Just staning and you explaining stuff. Great construction work and design! Love your vids!

  • @josephc3276
    @josephc3276 Год назад +2

    Mike you never fail to get a jaw drop from me watching your videos. Never gets old!!!! jm2c ✌.

  • @markhottman2652
    @markhottman2652 Год назад +1

    11:26 Sequencing Work. Mike you are an Engineer (complex) at that.

  • @ferventlycavalier
    @ferventlycavalier Год назад +6

    What will happen with the lumber you take out? Looks like quality wood.

  • @vettecurley
    @vettecurley Год назад

    AMAZING! It just doesn't stop with you...

  • @MrHeavyzz4
    @MrHeavyzz4 Год назад +3

    Mike I just love you and Marks enthusiasm and you're incredible engineering ability's. I just want to say I find it up lifting and brightens my day. Thank you. Daryl from Indy.😀

  • @hbb3367
    @hbb3367 Год назад

    Draco was inspiring, Scrappy was totally amazing, but this house is over the top. You are the man, Mike Patey.

  • @m800153
    @m800153 Год назад +1

    Boo yeah! Great to see you again mike!!!!

  • @MrThuggery
    @MrThuggery Год назад

    Prep is always the key young Micky boi!

  • @larrymiller4
    @larrymiller4 Год назад

    I love this, Mike! Love your channel, love your enthusiasm, love your content. Love to see how you make it all happen.

  • @patrickheavirland3599
    @patrickheavirland3599 Год назад

    Good morning from Minnesota!! Outstanding engineering!! So fun to follow!!

    • @MikePatey
      @MikePatey  Год назад

      Glad you're enjoying it!

  • @nathaniellangston5130
    @nathaniellangston5130 Год назад

    I would for SURE drive 31 hours to come to get that timber! Great job!! These videos are something I probably wouldn't have looked into before but I'm finding them completely captivating.

  • @garyr1522
    @garyr1522 Год назад

    Love the engineering chat, love the enthusiasm. Good stuff.

  • @wanderdowndave3778
    @wanderdowndave3778 Год назад

    This is a long way away from your first decking job. Great to watch.Thanks for the ride.🤜

    • @MikePatey
      @MikePatey  Год назад

      This ol knuckle head has finally learned a few things 😂

  • @AkPacerPilot
    @AkPacerPilot Год назад +3

    I’m so excited for you guys, this house is going to be amazing!!!

  • @oleran4569
    @oleran4569 Год назад +8

    The prep detail and experienced thought that Mike has put into this is fantastic! Logistics, loads, thermal conduction, assembly sequence details and coordinated execution are case studies in excellence!

  • @WisdomFromAshes
    @WisdomFromAshes Год назад

    I am so excited for you! I'm enjoying every minute of this. Love the way your mind works. Keep up the good work.

  • @DutchKC9UOD
    @DutchKC9UOD Год назад +5

    Love the engineering parts of your videos more info the better

  • @charlesburns2554
    @charlesburns2554 Год назад +2

    Absolutely Amazing 👏

  • @fransliebenberg8973
    @fransliebenberg8973 Год назад +3

    For small quantities of concrete in low temperatures, you can even mix with hot water. I like your curing solution with space heaters and covers over the concrete. Due to different ages of concrete parts you will aways have some fine cracks at interface between old and new. There is a concrete repair mortar that you paint on, which migrates into the cracks and gives a good seal. (Sika or Flexcrete)

    • @k3corvette35
      @k3corvette35 Год назад

      Sika makes great products I use their VOH mortar for patches, and Sika-flex SL and Sika-flex 1a chalk all the time on my jobs.

  • @glencrandall7051
    @glencrandall7051 Год назад

    WOW what a house.

  • @tomuhlig7077
    @tomuhlig7077 Год назад

    Awesome build!

  • @blameTECHIE
    @blameTECHIE Год назад +3

    Any chance you might make some small laser-etched signs from some of the thinner reclaimed timber Mike? Some fundraising for the charities?

  • @danandyong6653
    @danandyong6653 Год назад +1

    Careful Mike! (If you're using kerosene) Last time I heated a basement concrete pour in winter with a Kerosene heater, the concrete cured extremely dry, and crumbly! Was weak as well, as we needed to hammer it all out from the heater damage.

    • @terrysullivan1992
      @terrysullivan1992 Год назад

      He clearly stated propane. Even brought in that 1000 gal. propane tank for the job.

  • @lukegasper3300
    @lukegasper3300 Год назад

    Enes needs to give a house tour when this beauty is done

  • @PaperworkNinja
    @PaperworkNinja Год назад +1

    I showed up for the experimental aircraft builds, but stayed for the household engineering. This project is fascinating. And with all that wood coming out, how much would be salvageable to make, say, a wooden aircraft frame and body?

    • @patheddles4004
      @patheddles4004 Год назад

      I'd assume it's the wrong kind of wood for that - just way too heavy. For aircraft you want to maximise strength-to-weight, whereas for construction you're looking at much bigger loads and you're optimising for strength-to-volume (and don't really care about the weight of the wood itself). Caveat caveat of course, I'm not an expert.
      I actually discovered this channel when Mike crashed Draco, but beyond that I followed the same path as you: subscribe for the experimental aircraft, stick around for basically anything else he wants to upload because it's all interesting.

  • @gabrielrenaud1965
    @gabrielrenaud1965 Год назад

    I love your video! I learn so much every time! Back to work!

  • @imaner76
    @imaner76 Год назад

    Keep smashing it.

  • @poolmarket865
    @poolmarket865 Год назад

    Hello. I saw your pool project and was blown away by the idea.
    A floating floor that will go up and down on cables is crazy. I would like to see the end of your project and how everything works.
    I'm wondering, when the floating platform is raised, there will be no gap between the floor of the SPA area, people won't swim under it???
    And when the platform is on the surface, it will not warp from the weight of the guests??
    And if the floating platform is at the bottom, it will be affected by a colossal pushing force.
    What is the volume of water in the pool?
    I was confused by the number of fixing dowels on the wall, at the bottom of the pool for the passage of cables.

  • @warehouseman6325
    @warehouseman6325 Год назад +1

    Looking great

  • @katzolicious
    @katzolicious Год назад

    Blows me away - great video like usual. Get back to work!

  • @ban80
    @ban80 Год назад +1

    Any worry about co2 carbonation from the heater affecting the concrete ?

  • @lylemorse6959
    @lylemorse6959 Год назад

    Mike, your mind is Genius!

  • @willestunts
    @willestunts Год назад

    Can’t wait to see the finished house!! Really stunting on all your neighbors 🤣

  • @torbendjerf
    @torbendjerf Год назад

    Well it's starting to look like a space program you going to have anything you can ride to space in unbelievable progress better be in every magazine in the world great job change the world that's what you do

  • @casinogeno1
    @casinogeno1 Год назад

    Mike, you could literally build a giveaway house out of your throw away wood!! What a legend!!!

  • @lsucody3687
    @lsucody3687 Год назад +1

    His scrap wood could build my dream little cabin…..I’ve got the land but that’s it lol. Hopefully before I’m 70 33 years from now I’ll have it built

  • @UncleKennysPlace
    @UncleKennysPlace Год назад

    Can't wait to see Mike and Chandra dancing.

  • @jayroller7054
    @jayroller7054 Год назад +2

    Brother you could use a lapel mic. 😎

  • @paulodeoliveira3368
    @paulodeoliveira3368 Год назад

    Mike when you have a narrow column and a slab, you get a thing called punch through, we overcome it by making the column wider at the top or by using a beam.

  • @patnjos3843
    @patnjos3843 Год назад

    MORE! WE NEED MORE!

  • @travisk5589
    @travisk5589 Год назад +38

    Yep, it's official. Mike's building a bunker with a massive water storage tank.

    • @UncleKennysPlace
      @UncleKennysPlace Год назад +2

      He'll use deuterium oxide to moderate neutron emissions from his reactor.

  • @jublejones9983
    @jublejones9983 Год назад

    Aloha Mike,
    Let’s get into a Mass Timber project. A whole other level
    Of engineering…
    Your the best.
    Be well

    • @patheddles4004
      @patheddles4004 Год назад

      Mass timber project is next - it's framing the rest of the house.

  • @gavin1443
    @gavin1443 Год назад

    mike you are an amazing man. it is the can do attitude that I love. and have to laugh, I grew up in your Neiborhood. it was just fields back then but I recognize the dragline in the background. the owner of that rig was an amazing man and he is missed.
    thank you for the videos and the lessons you bring with them.

  • @djwilliams4714
    @djwilliams4714 Год назад

    Mind boggling

  • @NSResponder
    @NSResponder Год назад

    I look forward to your scrap wood cabin build. How many trips will it take with a chopper to get your materials to some scenic hilltop?

  • @AustNRail
    @AustNRail Год назад +1

    Mike I trust you are going massively prop under that timber formwork prior to pouring the concrete? I work in the industry here in Australia and have witnessed first hand what happens with wet weight of concrete. Catastrophic failure and death. I admire your work, I feel like I’m watching a nail biting movie.

    • @MikePatey
      @MikePatey  Год назад +1

      Oh ya, it's ready to hold the weight. Last thing I need is a problem in the middle of a pour.

  • @dominiccompagnone2401
    @dominiccompagnone2401 Год назад

    Mike, you raise a point about timber coming out. What are you intending to do with it?

    • @MikePatey
      @MikePatey  Год назад +1

      Timber will be used for framing on the rest of the house. I try to re-purpose anything I can!

    • @dominiccompagnone2401
      @dominiccompagnone2401 Год назад

      @@MikePatey thanks - I was thinking more post-build

    • @terrysullivan1992
      @terrysullivan1992 Год назад

      @@dominiccompagnone2401 There won't be much if anything left. It's all going to be the framing for the house.

    • @dominiccompagnone2401
      @dominiccompagnone2401 Год назад

      @@terrysullivan1992 thanks - i realised i misread Mike's reply - thought he wrote forming but he wrote framing

  • @texasrednspeck
    @texasrednspeck Год назад

    Very,very interesting build.

  • @ianwhittinghill
    @ianwhittinghill Год назад

    Did the tension cables in those precast spans get cut when you trimmed the ends to size? Wouldn’t that cause a significant loss of strength?

    • @patheddles4004
      @patheddles4004 Год назад

      Shouldn't compromise the strength - tension cables in concrete are only held under tension while the concrete spans are first poured anyway. Once the concrete has set, each point along each cable is balancing the tension of the cable against the compression of the concrete. You're not relying on anchors at the ends of the cables - instead the entire length of each cable is made of anchor points where the cable is bonded to the concrete, so you can trim as necessary and the remaining pre-stressed concrete span won't lose any strength.
      We are used to seeing those cables (or untensioned rebar for that matter) sticking out the sides of precast panels, but that's because in some applications you want to embed those ends in some other concrete that you're pouring (or tie to other panels or whatever). In this application, the spans don't need any of that - all their loads are just pushing them down onto the supports that they're sitting on.

  • @shortribslongbow5312
    @shortribslongbow5312 Год назад

    Outstanding feat of engineering.

  • @timothyosborn1697
    @timothyosborn1697 Год назад +2

    I'd say you're in over your head but I know better. If it were myself I'd definitely be in over my head. Time to get back to work!

  • @86Kiaser
    @86Kiaser Год назад

    Hope you've planned a backup generator for say heating and a heater for anti freezing water(low power needed of course for that) and for storms?

    • @patheddles4004
      @patheddles4004 Год назад

      Haven't seen the details yet, but he has said that the entire volume of water will automatically drain into underground storage tanks if the pumps lose power - that's specifically to avoid damage from the water freezing in places that aren't designed for that.
      Also I assume he's got backup power planned, but I don't think we've seen details of that yet.

  • @Parkinwad
    @Parkinwad Год назад

    Amazing build Mike! Having rebuilt after a fire, I think the wood coming back out of your build cost as much as my entire rebuild! Lol! Awesome engineering, and glad I didn't have to deal with engineering in my rebuild. Crazy enough learning the General contracting side of things let alone adding other "trades" on top of that! Keep up the great work and thanks for sharing this! Looking forward to seeing it finished! (And of course airplanes too! 😉)

  • @tristanpenrose7248
    @tristanpenrose7248 Год назад

    This is awsome Mike! I have watched all you videos and these ones of the house I'm loving! I'm a builder by trade and in the process of building my own concrete house in New Zealand. Concrete is such an amazing product and and gives you so much scope for crazy designs that can't be done with any other materials. I have never had the privilege of going to America but given the chance then I would love to see this place if I'm ever in your neck of the woods.

  • @krehbein
    @krehbein Год назад

    With the cables in the span deck, aren’t you supposed to NOT cut the end of those since their tension provides structural integrity? Talking about the large curve,cut with masonary saw.

  • @TSSolutionsPro
    @TSSolutionsPro Год назад

    Home Show? For those of us engineering geeks in Utah that would love to see this feat in person.

  • @jimhoran5445
    @jimhoran5445 Год назад

    Looking good Mikey! 🇺🇸🇺🇸🇺🇸🇺🇸

  • @alexgrigoreas4825
    @alexgrigoreas4825 Год назад

    Question: The wood you are removing, is it being donated or are you using it for another project? Amazing to see the engineering in this project.

    • @MikePatey
      @MikePatey  Год назад +2

      Great question, I'll be using it to frame the rest of the house. Try to re-use everything I can!

    • @alexgrigoreas4825
      @alexgrigoreas4825 Год назад

      @Mike Patey I figured that you already engineered the future use. I hope you are planning on selling tours of this place for us engineering geeks. 😉

  • @ivicamilosavljevic4706
    @ivicamilosavljevic4706 3 месяца назад

    Need to add one detail... not only heat, but humidity is very important for the concrete... moisture, as You said, is needed for well maturation of the concrete... 7 days minimum, to arrive at some 70-75% of its hardens, and portability...after 24-28 days it arrives at its full load capacity...

  • @ericchen6096
    @ericchen6096 Год назад

    Mike, Do you have a topping slab on top of the Spandeck slabs? Usually we have a reinforced topping slab to act as a diaphragm to transfer all the lateral loads to lateral load resisting system. If no topping slab is used there are usually some embedded connectors to connect the planks together to transfer shear loads. I am just curious and i am a structural engineer very inertested in airplanes.

    • @patheddles4004
      @patheddles4004 Год назад

      Yeah I think he said he's going to pour a 12" reinforced slab overtop of the spans. That's where he talked about going 12" instead of 8".

  • @larrylong6268
    @larrylong6268 Год назад +3

    Livermore laboratories reported yesterday that the Earth has begun to tilt on its axis. The cause of the tilting is somewhere in the state of Utah, more investigation is required.

  • @cortpeterson9992
    @cortpeterson9992 Год назад

    When your done with those 2X6 can I come get them from you. I’m going to be building a home and could use them. Just building in genola

  • @P-J-W-777
    @P-J-W-777 Год назад

    Experiencing airplane build withdrawals lol…. 😂 Can’t wait to see what’s in store with those P&W’s and I’m sure a bunch of Garmin goodies.

  • @markhooper5824
    @markhooper5824 Год назад

    Ace build.