I have a 2015 3500 6.7 deleted, on yours do you notice a vary small amount of dark exhaust coming out your tail pipe just driving down the road . When i pull my trailer I'll have a very light covering of black smoke on the front of my trailer and back half of my pickup
Keep in mind I have a 2019+ ram 2500 and did mine and ask them how to go back to stock if I had to and diesel dudes told me I would have to go to the dealer to flash a stock tune on it
My truck had mm3 just bought the truck and saw it. Went to hook up my cts3 and wasnt working. I disconnected the mm3 monitor and all the wires. Can i run the truck like that? Or will it hurt it?. I want to switch to efi live. Tho the truck runs great !
A 10-12 Cummins will be the same as this except they require you to first tune a boot file on then you tune the delete tune after. So basically it’s like doing two tunes. I will try to get a video up in the future.
The process will be the same, in the videos I did on the 2019-2021 you can see where I put the ez lynk bypass cable. The location will be the same for the efi live bypass cable.
I'm sure you would include this if you had it but I just want to make sure. Do you have an affiliate CODE for diesel dudes or is it just through the link? Want to order some stuff from them and support your channel. Thanks for your vids man.
I'm doing a allison swap on my 21 cummins 6.7, got the tranny in, went to tune it with efi live,I got the tune from CA tuning, as I was tuning the truck I didn't see that I was using 2 bypass cables, 1 was already installed by previous owner. The loading only made it to 35% the got a error message, I tried tuning it again after removing 1 of the bypass cables but I must of confused the ecm because now there's no communication from the ecm to the auto cal, can you please help I'm new at this and I really need my truck back on the road
The difference between the EFI live vs the EZ link says one can be put back to stock and the other you can't. I know why would you want to revert back to stock....however I was under the impression that any tune could be put back to stock if needed? Is this not true with all delete tunes?
If you get the kit from the link in description it will come with trans tuning if you have the 68rfe transmission. The trans tune is built in with the engine tune.
@@darkirondiesel I already have the 5 knob installed with easy lynk and truck is deleted but the guy who installed it didn’t leave me with anything so idk what I need to tune the new transmission? Can you send me a link for that
Nah you should be good if it’s an emission related code it should be gone once you tune the truck. Make sure to tune the “boot” or “patch” file first (I forget what it’s called) before you tune the SOTF file. I’m assuming you got the efi live.
Both are good. They will both tune the truck just fine, but the ez lynk has a few more options like being able to monitor gauges with your phone, also some cool Vehicle functions like turning on high and low beams at the same time. Basically if you have the money, get the ez lynk. If you are on a budget get the efi live.
@darkirondiesel Ah makes sense. Great video, EFI Live is definitely the way to go with the Cummins. When it comes to tune files though these guys like GDP, CCS, AMDP, are becoming like generic box tunes. It's the guys/companies you don't see or hear about everywhere that are writing the good tunes. And have better customer service. In my opinion.
Diesel dudes actually have really good customer support, just gotta make a ticket and communicate through email but I find their support is much better then some other companies.
I'm at 35k miles. my trucks does everything it's sposta do so far. but I want this. still wish they could crack the factory computer so far the best thing I've done to my truck is a set of 35 by 11.5 falken wildpeak at3
If you live in Canada then dirty diesel is great but they only ship to Canada, diesel dudes ships world wide so if you live anywhere other then Canada I’d recommend diesel dudes. Both have quality exhausts and good tunes.
FULL KIT HERE: shrsl.com/4ke08
SHOP MERCH HERE: darkirondiesel.com/
do you have a discount code?
Even if it is illegal in my state I’m still going to do it! 😎
Naughty naughty
I bought a kit through your affiliate link. Thanks for the vids.
Bro thanks for this video. It was great!
Nice install! Keep up the good work! Happy New Year to You and Your Family!👍
Thank you! Happy new year!
Thank you for the great video! How did the truck perform while leaving the EGR, and DFP?
When you pull the existing pins from ob2 you just tape them off and let the float?
If you don’t use the SOTF dial, can you constantly go in and change the tune with the programmer to what you want for that day? Thanks
I have a 2015 3500 6.7 deleted, on yours do you notice a vary small amount of dark exhaust coming out your tail pipe just driving down the road . When i pull my trailer I'll have a very light covering of black smoke on the front of my trailer and back half of my pickup
Quick question I’m buying a second hand efi live do these get married to a this first owner ?
Keep in mind I have a 2019+ ram 2500 and did mine and ask them how to go back to stock if I had to and diesel dudes told me I would have to go to the dealer to flash a stock tune on it
Great video
My truck had mm3 just bought the truck and saw it. Went to hook up my cts3 and wasnt working. I disconnected the mm3 monitor and all the wires. Can i run the truck like that? Or will it hurt it?. I want to switch to efi live. Tho the truck runs great !
Can you unplug the grid heater or do the delete and not have a code for it tuning the truck this way?
What is the link to the exhaust and all video?
Can you do a 10-12 Cummins tuning video? I have a 12 6.7 68rfe
A 10-12 Cummins will be the same as this except they require you to first tune a boot file on then you tune the delete tune after. So basically it’s like doing two tunes. I will try to get a video up in the future.
Can you post the link for just the tuner ( I have a 2018 2500 6.7 68RFE )
I don’t wanna take anything out the engine bay
Can you make a video of what sensors to unplug under the hood? Im getting a check engine light manifold pressure low
Dm me on instagram and send me a couple pictures of your engine bay and I can show you
Mine came with 3 different tunes on it...but no description of what each one is...
Why don’t you do an updated version for ‘21 2500 RAM using efi live?
The process will be the same, in the videos I did on the 2019-2021 you can see where I put the ez lynk bypass cable. The location will be the same for the efi live bypass cable.
Does the asian hold up good when deleting and tuning the truck? Is there anything that should be done, like a transmission tune?
I'm sure you would include this if you had it but I just want to make sure. Do you have an affiliate CODE for diesel dudes or is it just through the link? Want to order some stuff from them and support your channel. Thanks for your vids man.
Hey man, if you use that link I get a small commission. I don’t have a discount code unfortunately but if you use the link I’d really appreciate it!
I'm doing a allison swap on my 21 cummins 6.7, got the tranny in, went to tune it with efi live,I got the tune from CA tuning, as I was tuning the truck I didn't see that I was using 2 bypass cables, 1 was already installed by previous owner. The loading only made it to 35% the got a error message, I tried tuning it again after removing 1 of the bypass cables but I must of confused the ecm because now there's no communication from the ecm to the auto cal, can you please help I'm new at this and I really need my truck back on the road
Send CA a message if you haven’t already. The owner of the company is a great guy to work with. I know him personally and he’ll get you going
Should I clear cel before tuning?
The difference between the EFI live vs the EZ link says one can be put back to stock and the other you can't. I know why would you want to revert back to stock....however I was under the impression that any tune could be put back to stock if needed? Is this not true with all delete tunes?
You can use efi live to put your truck back to stock, they can also send you a stock file if you need one.
I got the kit you just installed in the video, followed your instructions completely but nothing worked
How do I tune the transmission I have efi live but not sure if the transmission is tuned
If you get the kit from the link in description it will come with trans tuning if you have the 68rfe transmission. The trans tune is built in with the engine tune.
@@darkirondiesel I already have the 5 knob installed with easy lynk and truck is deleted but the guy who installed it didn’t leave me with anything so idk what I need to tune the new transmission? Can you send me a link for that
Here you go shrsl.com/4bj2w
Is the bypass needed? I thought that was 18 up only?
Code po405 just came on on my deleted 16 ram 6.7 can you help me out please I believe it’s related with the egr circuit low
You no longer have an EGR.
Also can you tune it twice with the same efi live??
Shoot me a message on instagram
Hey, when I bought it they said you would get the tune emailed to you? I never got the email and can’t get in touch with anyone.
Did you fill out the form? Check your spam folder
@@darkirondiesel they sent the email, thanks!
Do the 2016 year models have locked ECM?
No
Ok I ordered one does it save the stock file so I can flash it back to stock anytime 2019 ram 2500 68rfe
Thanks
You can pull a stock read before you tune it yes
Ok where do I find a step by step how to do it lol ?
On a 15 model, can everything be removed before tuning?
Yes I just prefer to do the tune first to make sure it goes well before removing everything.
Is it the same install process for a 2019 Laramie?
No it’s a bit different, but I have a video on the 2019-2021 rams! Posted a month ago
Here’s a link How to FULLY DELETE your 5th Gen Cummins AT HOME (2019-2021 6.7 Cummins)
ruclips.net/video/Qeoc06e_ZD0/видео.html
I watched this one but I have Eli live and not ez link. I already have a full delete. I appreciate the help!@@darkirondiesel
just bought mine from diesel dudes 2010 ram 3500. If i have a check engine light should i repair that first?
Nah you should be good if it’s an emission related code it should be gone once you tune the truck. Make sure to tune the “boot” or “patch” file first (I forget what it’s called) before you tune the SOTF file. I’m assuming you got the efi live.
What if I have a manual transmission
Just let them know when you order the tune and they will send a file for the manual trans!
Whats better efi or ezlink?
Both are good. They will both tune the truck just fine, but the ez lynk has a few more options like being able to monitor gauges with your phone, also some cool
Vehicle functions like turning on high and low beams at the same time. Basically if you have the money, get the ez lynk. If you are on a budget get the efi live.
@@darkirondiesel efi has the little monitor ezlynk you have to use your phone correct?
So does diesel dudes write their own tunes?
No they use a couple different companies depending on which tuner a guy orders. GDP is one of the main companies.
@darkirondiesel Ah makes sense. Great video, EFI Live is definitely the way to go with the Cummins. When it comes to tune files though these guys like GDP, CCS, AMDP, are becoming like generic box tunes.
It's the guys/companies you don't see or hear about everywhere that are writing the good tunes. And have better customer service. In my opinion.
Diesel dudes actually have really good customer support, just gotta make a ticket and communicate through email but I find their support is much better then some other companies.
So I can load the tunes and then take all the emissions at a later time?
Stop name dropping the nerds. EPA ain’t playing
i want to tune my 22 cummins at home!
Good luck haha
They have a kit for that, here’s the link! It’s out of stock until February though shrsl.com/49epv
I'm at 35k miles. my trucks does everything it's sposta do so far. but I want this. still wish they could crack the factory computer
so far the best thing I've done to my truck is a set of 35 by 11.5 falken wildpeak at3
@@darkirondieselwait theirs a delete kit available for the 2022's now so 23 is around the corner then
What’s different with a cab a chassis delete. Have a 2018 3500 cab and chassis I’m wanting to delete.
It’s basically the same they just need to know it’s a cab and chassis. Also the egr is a little bit different, but very similar
In your opinion who’s better Dirty Diesel or diesel dude’s?
If you live in Canada then dirty diesel is great but they only ship to Canada, diesel dudes ships world wide so if you live anywhere other then Canada I’d recommend diesel dudes. Both have quality exhausts and good tunes.
Already have everything just need tunes. Dirty?
Ya DM me on instagram I can get you 7% off ccs tunes
Dirty Diesel ships to U.S.
Bogan Mission
Nice hole
Can I get your email? I’m new to all this and have questions. Thanks