Very nice only to check up diodes,not to a bulb or anything also ,its to week,otherwise put all law's in the trash,whith a batery not flash one single lamp
WONDERFUL idea! And with easy-to-find components that everybody can obtain from scratch! Is just the circuit I was looking for! Thanks a lot! Greetings from Argentina!
or the displays already have the integrated ones in their bakelite base to manage the logic and you are only feeding the display with the variations of the base current of the transistor together with the potentiometer, it is seen that you feed the displays that way
Sie müssen zwischen dem Brennen des Anus nach dem scharfen Chili und dem elektrischen Bsuelement mit der Bezeichnung "Brückengleichrichter" unterscheiden. Zu Zeiten der Selenplattengleichrichter gab es noch die Deutung bei einer Überlastung derselben und das hiess dann:" gleich riecht er". 😋😋😋
How can you connect the 8-segment display directly without using the components that manage the display and what part number does that triple display have?
it will be very usefull if it has a C.F.L socket too, i mean you can change from led bulb light to C.F.L when u want with a switch and still have a tester use
@@TechIdeasAG TIP3055/D. TIP3055 (NPN),. TIP2955 (PNP). Complementary Silicon. Power Transistors. Designed for general−purpose switching and amplifier applications. Then how can you use MOSFET instead of that transistor?
those are some of the worst solder joints I've ever seen! you need to make sure both terminals you are joining are in touch with the soldering iron tip, and they heat up together so when the solder melts it wets both uniformity.
سر میرے پاس کمپیوٹر کی پاور سپلائی ہے۔ جس کو میں ائر کولر چلانے کیلئے استعمال کرتا تھا ۔سر میں نے 12 والٹ کی موٹر لی جو کہ ڈی سی ائر کولر میں عام استعمال ہوتی ہے ۔ اس موٹر کو پاور سپلائی سے چلانے پر پاور سپلائی آف ہو گئ۔ اب پاور سپلائی بغیر لوڈ کے چلتی ہے ۔ جیسے ہی کوئ موٹر کنکٹ کرتے ہے سپلائی آف ہو جاتی ہے۔ 1 یا 2 منٹ گزرنے کے بعد دوبارہ پلگ لگائیں تو آن ہوتی ہیں اور ایک سیکنڈ بعد آف ہو جاتی ہے۔ بغیر لوڈ کے سپلائی چلتی رہتی ہے ۔ پلیز اس سپلائ کو ٹھیک کرنے کا کوئی حل بتائیں۔
Old CFL Circuit to soldering Iron
ruclips.net/video/LoIK0QIUlWY/видео.html
Very nice only to check up diodes,not to a bulb or anything also ,its to week,otherwise put all law's in the trash,whith a batery not flash one single lamp
WONDERFUL idea! And with easy-to-find components that everybody can obtain from scratch! Is just the circuit I was looking for! Thanks a lot! Greetings from Argentina!
Hello, It is a device that has nothing to see in every house, but it is very useful in the field of electronics. That's great
Boa tarde. Parece excelente. No futuro, vou tentar fazer. Obrigado e saudações do Brasil.
Please What about frequency khz and stability? Thanks!
Bom dia parabens muito bom excelente projeto
.good homemade project? ilke it please have a complete list of components being used, what transformer voltage to be used in this type of diy.?
This project is very good!
5volt Dene par kya Jada output milege
or the displays already have the integrated ones in their bakelite base to manage the logic and you are only feeding the display with the variations of the base current of the transistor together with the potentiometer, it is seen that you feed the displays that way
A Bridge Rectifire eh? Where do you get those from? Last time I had a rectifire was after a rather hot chilli.
Sie müssen zwischen dem Brennen des Anus nach dem scharfen Chili und dem elektrischen Bsuelement mit der Bezeichnung "Brückengleichrichter" unterscheiden. Zu Zeiten der Selenplattengleichrichter gab es noch die Deutung bei einer Überlastung derselben und das hiess dann:" gleich riecht er". 😋😋😋
Without translating that as I don't speak that language, I assume it's an explanation of my attempt at humor to non-English speakers?
@@wolframgerber7118 dude that's hilarious.
@@spudhead169 you would be correct, except his comment is funnier.
@@rogerramjet6429 Well it wouldn't be hard to accomplish that.
How can you connect the 8-segment display directly without using the components that manage the display and what part number does that triple display have?
The module with the three displays is a voltage meter that already has its control circuit.
I think of this as a digital voltmeter
Hi bro please tell me can we touch the output red or black prods means its safe from electric shock?
Yes, it's safe
I can't understand how can this circuit calculate out put voltage n show by 8 segments without any logical part 🤔
It's a digital Multimeter that's why it is showing the voltage readings.
no es un simple display es un voltimetro y esta midiendo la caida en el componente.
Haha
I'm still trying to figure out how he just wiggled out a soldered-in coil from the rectifier circuit board.
@@maxi-me maybe it was de-soldered before he wiggled it out
Number one 😍
Brother can you please tell me which mobile phone are you using for making videos...❤️
App is Lumafusion
That heatsink stick up with silicon glue, for short it's ok. Anyway that's a nice circuit.
Nice video...
nice 👍
Qual transformador?
What exactly IS this device?
And most people use a piece of strip board to construct it, not a piece of wood.
Is that because you don't how to use stripboard?
Or just twist the bulb into the nearest table lamp. Either way is good.
A 500 amp battery that gets 3.7 volts should I charge it to 60 volts and use a 60 volt dc motor to load it or should I?
You wouldn't get a 3.7 volt battery that has 500 amps.
They don't exist.
As for the rest, I'm struggling to make sense of it.
Fantastic
What type of transformer that you are using
Ferrite core flyback
I dont see how this circuit oscilate. What i see is a switching transistor that can go from on to off just ones related to the base voltage
Good information video
Thanks
Thanks for sharing
Thanks for watching!
Terimakasih telah berbagi
Trsnsform DC ?! Or did someone invent a AC battery.. 😆
It's an inductively coupled switching circuit, used as voltage multiplier and zener tester.
DC to AC then DC out
3.7 v ရှိသည့် Amp500 ဘက္ထရီးကို 60v တင်ပြီး
ဘက်ထရီ ဘိန်းတွေကို အသုံးပြုလို့ ရမည်လား
That doesn't make sense dude.
👍optmuuu!!
Amplific signal to 4G?
it will be very usefull if it has a C.F.L socket too, i mean you can change from led bulb light to C.F.L when u want with a switch and still have a tester use
SHUKREYA FRIENDS
In schematic is 1K potentiometer,you use 10K
Master
Upload video continuously.
Prince Kingdom 😂
Me use 2n3055 meter TRANSISTOR
Same transistor just different package.
The one shown is a TO220. Yours is a TO3.
Both NPN.
The PNP variety is MJE 2955. Or 2n2955
Ok
The vid with no title, no meaning, NO TIME
Well now you have made me think about it………….you are correct!!
Bob
England
Can I use irfz44n mosfet
Yes, you can
@@TechIdeasAG TIP3055/D. TIP3055 (NPN),. TIP2955 (PNP). Complementary Silicon. Power Transistors. Designed for general−purpose switching and amplifier applications. Then how can you use MOSFET instead of that transistor?
What is it for? How is it used?
Video isn't even 5 minutes long.
Did you even watch it?
If you dont understand simple video,skip this channel i.e. cartoon
those are some of the worst solder joints I've ever seen! you need to make sure both terminals you are joining are in touch with the soldering iron tip, and they heat up together so when the solder melts it wets both uniformity.
Urdu samaj me nahi aayi, Hindi please
سر میرے پاس کمپیوٹر کی پاور سپلائی ہے۔ جس کو میں ائر کولر چلانے کیلئے استعمال کرتا تھا ۔سر میں نے 12 والٹ کی موٹر لی جو کہ ڈی سی ائر کولر میں عام استعمال ہوتی ہے ۔ اس موٹر کو پاور سپلائی سے چلانے پر پاور سپلائی آف ہو گئ۔ اب پاور سپلائی بغیر لوڈ کے چلتی ہے ۔ جیسے ہی کوئ موٹر کنکٹ کرتے ہے سپلائی آف ہو جاتی ہے۔ 1 یا 2 منٹ گزرنے کے بعد دوبارہ پلگ لگائیں تو آن ہوتی ہیں اور ایک سیکنڈ بعد آف ہو جاتی ہے۔ بغیر لوڈ کے سپلائی چلتی رہتی ہے ۔ پلیز اس سپلائ کو ٹھیک کرنے کا کوئی حل بتائیں۔
or you just buy a cheap multimeter, learn how to use it for lest than the price of the components used here collectively.
ചൂടു വലിച്ചെടുക്കുന്ന ഹിറ്റ് സിങ്ക് ഗ്ലു ഗൺ ഉപയോഗിച്ച് ഒട്ടിക്കുന്ന മഹാൻ
भाई जब कोइ भी video डालो तो अपना मोन व्रत को तोड़ कर बनाओ तो हम भी अपने कानों को थोड़ा कष्ट देने का कष्ट करेगें
Click bait gets NO SUBS
offensichtlich einen selbstschwingenden Gegentaktoszillator
False thumbnail
First comment
No use
Crap