You deserve so much more than 50k. I can imagine that you're gonna be a massive RUclipsr one day. Keep it up with these original ideas like the "cheap" Civic build, and you'll be up there one day
BigBoiCamran sure its still unsafe though id rather have him alive than having him injured or dead just because he had to find out If the steering wheel was any good
BigBoiCamran sure thats really unsafe but i as the car, hopefully, is not for videos only he will probably not vlog most of the time he is behind the wheel thus making the steering wheel the most dangerous thing in the car, probably, at least i hope so.
Sleeves like that have been around since before the 1st Fast n furious. They're going to destroy those struts. When it bounces for a quarter mile after a small bump you'll understand why ppl dont like them. Keep up the vids. I enjoy seeing beginners to car repair/mods learn stuff. The project is coming along. You'll have a cool civic...one day. Lol keep at it my dude!
Yeah that setup has been used since the 90’s. But since then the car community as a whole has learned and some of the best setups is a combination of different manufactures to make a custom coil over setup. They still are not cheap but matched with spring rates and dampening they are your best cost ratio. groundcontrolstore.com They use custom eibach coils, Koni adjustable dampeners and their custom coil over setup. They also have a conversion kit like what you have but with custom spring rates. They let you choose your struts you want to use.
Found your channel about a month ago, and now I can't wait till you post haha keep up the good work man! Use the tools you have to do what you can, that's the best way of learning anything :)
I found your channel forever ago when your first wish video came out for hour BRZ. Then I could never find your channel until last week. Love it! Keep up the hard work! I want to have a project car and to do RUclips but school and baseball takes so much time 😐 Keep up the good work!
Lol, I know that feeling with the rear struts being stuck. I did the struts on a car at school and had to get the oxyacetylene torch out to get them loose. Stay motivated though boys! Keep up the awesome work!
The exact same thing happened when I did my rear suspension on my Integra - the bolt gets seized inside the bushings! I ended up having to cut the whole control arm (which I was replacing with Type R LCA's anyway). Good luck getting it out!
Guys i just start to watch the civic build videos and loved it!!! I subscribed after the first video keep it up guys !!! By the way im a subie lover the BRZ rocks!!!!!
tell you the truth to the compress the spring. I've always use two straps put one on each side and just tighten it down one by one going back and forth. Works everytime.
I had the same issue with my rear suspension on my integra. So I was running coilovers in the front and stock suspension in the back until I decided to go mayhem and just grind off the fork part. The bolt was completely seized onto the bushing
Hey, wassaaaa ma dude... just dropping by to let you know about the lower control arm on the back had the same problem on my dc2 twice... dont sweat it and buy a shock and lower control arm for it .. bushing just turn into dust because its rust welded .. i had to even cut the shock bottom where it bolts up on my first time .. so just get used or new parts maybe aftermarket control arms for your next video :) hope you get it.(and no torch wont work tried everything also
I did not know those kind of sleeves even existed. Here in Germany those kinda things are not allowed. We have to many regulations on our car building game if we can call it that. Always love to watch your videos and am always psyched to see that you've uploaded a new one. :)
Give it another year or so workin on these Hondas and youll kno everything there is to kno about em. Also a really good priced strut for these Eg's and Ek's is the Koni Orange or yello. Or Ktuned coils if you dont worry about price
I just got offered a Civic to buy and I defiantly gonna pull the trigger on it after watching your videos, it’s beat up as hell and it’s automatic but ima make it good looking for a beater, btw Robbie we gonna be battling the best cheap civic build 😤😤Ima be wider and ima run my 16x10 deep dish steelies 😂
dont let the civic get to you lol its looking great so far so keep up the awesome work. I noticed under your eyes you had some blue so yeah it does show up sometimes.
I'm planning to install coilover sleeves on my stock CRV 99 shock absorber. Would you recommend this or lowering spring would be better? I can't afford coilovers just yet as of now. Thank you so much!
you can make decent diy performance coilovers using name brand struts, qa1 sleeves and eibach/ bilstien/other name brand springs just way more expensive than ebay stuff lol
I had a feeling those bolts were going to snap because its 90% chance they will lol. Both of my bolts in the rear forks snapped but luckily i had few bolts lying around and had brand new skunk2 lca (replicas). If you had a angle grinder all you needed to do is cut the bolt and get a hammer and a drift pin and wack it out :P
I bet you'll be at 100k by September latest, also I have done coils on probably 5 different civics/integra and on all 5 I snapped the rear control arm bolts lol
Lol Honda probs bro haha ran into the same thing with my integra but when all said and done still could be take it home because my rims didn't clear the caliper 12 hours later lmao
You deserve so much more than 50k. I can imagine that you're gonna be a massive RUclipsr one day. Keep it up with these original ideas like the "cheap" Civic build, and you'll be up there one day
Jonas Gundlach ikr
Wait he’s at 50k!? Last time I remember he was at 32! Ugh time flies! You’re right though. I can see this channel at 100k in no time!
Jonas Gundlach I can see him up there with tj hunt (he probably gets compared to tj hunt enough tho 😂)
xXhockeymonkeyXx he has 60 k
The growth is crazy lately, thanks so much for the support man! Cant wait to see where we go!
Still using the steering wheel although it could break any minute! I love it!😂💓
Frederic it will break in 500 miles
He can't let us know if it's any good unless he uses it, even if that means it breaking off while he's driving lmao
BigBoiCamran sure its still unsafe though id rather have him alive than having him injured or dead just because he had to find out If the steering wheel was any good
yeah but... if he vlogs it
BigBoiCamran sure thats really unsafe but i as the car, hopefully, is not for videos only he will probably not vlog most of the time he is behind the wheel thus making the steering wheel the most dangerous thing in the car, probably, at least i hope so.
I love how last week you were thanking us for 50,000 subs and a week later you’re gonna break 60,000. Wow life is great.
wish i could be saying the same :(
BrzJohn whatever it is bro pull through ❤️
I'm trying my best haha trying to upload frequent maybe check my vids out and see if you like them lmao i have a whole 10 subs
It'll take off. Then you'll get another sub every day. And then more+ more
I'd like to hope so! maybe sub to me and be my 11th whole sub lmao i post 3 times a week!
Loving the series bro can't wait to see it fully done
Just got home from a long day at work and this video made my day 100x better! Keep up the great work!
Hey Robbie, i haven't slept so hooked onto this series.
Sahid Fernandez10 same here I’ve been binge watching it
I love this series so much
it looks 10X better than at the beginning, you guys did a great job!
and we are not even done yet, thank you!!
Absolutely loving the builds and I'm not even a honda fan but can't seem to get enough of your videos!!!!! Definitely deserve more then 60k subs
Congratulations on 60,000 subscribers, I can speak for all of us when I say I'm glad that you stayed committed!
Love watching the budget build vids! The end product of the civic will be so worth it in the end!
Love this series man, keep it up dude! Much love from the UK 👊
Hands down my favorite series to catch up on on RUclips. Much love homie ❤️ I’m jc with my little rusty 04 focus hatchback
I love watching old videos man so many memories
Sleeves like that have been around since before the 1st Fast n furious. They're going to destroy those struts. When it bounces for a quarter mile after a small bump you'll understand why ppl dont like them. Keep up the vids. I enjoy seeing beginners to car repair/mods learn stuff. The project is coming along. You'll have a cool civic...one day. Lol keep at it my dude!
Yeah that setup has been used since the 90’s. But since then the car community as a whole has learned and some of the best setups is a combination of different manufactures to make a custom coil over setup. They still are not cheap but matched with spring rates and dampening they are your best cost ratio.
groundcontrolstore.com
They use custom eibach coils, Koni adjustable dampeners and their custom coil over setup.
They also have a conversion kit like what you have but with custom spring rates. They let you choose your struts you want to use.
nice vid robbie as usual man loving this series!
I love you Robbie and all the stuff you do you have been a huge inspiration to me!!!!!!!! Keep up the amazing work
Keep doing the good work im currently watching this video in my birthday thank you for the content
Found your channel about a month ago, and now I can't wait till you post haha keep up the good work man! Use the tools you have to do what you can, that's the best way of learning anything :)
its so cool seeing ur channel growing that fast
I found your channel forever ago when your first wish video came out for hour BRZ. Then I could never find your channel until last week. Love it! Keep up the hard work! I want to have a project car and to do RUclips but school and baseball takes so much time 😐 Keep up the good work!
It’s so crazy coming back to these old videos before the turbo, b18, etc😭
Lol, I know that feeling with the rear struts being stuck. I did the struts on a car at school and had to get the oxyacetylene torch out to get them loose. Stay motivated though boys! Keep up the awesome work!
Been here since part one of this build, subbed like 2 mins in, love the videos👍👍
Congrats on your 200k subs Robbie, you gave me the hype and inspiration to do my own house made build.
5:17
Before i owned spring compressors I would do the same thing and yell out “fire in the hole!” To Warn the homies
Dope video 👍
Got my food, got my beverage, now it’s time to sit back and enjoy another amazing video. 😌❤️
i love your videos man, 50k subs is nothing compared what you will amount to in the near future
I did the same thing when I went to tech school and now I'm a certified Volkswagen technician kudos to you emerson
always left wanting more videos!! great work tho keep up the good content 👌🏼
this build is so fun to watch love every video of it
The exact same thing happened when I did my rear suspension on my Integra - the bolt gets seized inside the bushings! I ended up having to cut the whole control arm (which I was replacing with Type R LCA's anyway). Good luck getting it out!
Guys i just start to watch the civic build videos and loved it!!! I subscribed after the first video keep it up guys !!! By the way im a subie lover the BRZ rocks!!!!!
This is my favorite series of RUclips right now. It pains me to have to wait for the next video!
tell you the truth to the compress the spring. I've always use two straps put one on each side and just tighten it down one by one going back and forth. Works everytime.
Love your videos and this series!!
Don't give up on the civic this is my favorite series on RUclips right now
love this series, can't wait for more! cheers from Alberta :))
I love how your make a Honda with cheap parts it’s really entertaining keep up the good work btw love the the way the Honda is turning out
this is so accurate, when working on old cars nothing ever goes as planned
Yay civic build is back again
I love your “out” 🤣 🇨🇦
Common issue with 92-00 civics the rear lower bolt for the struts get siezed into the control arm bushing and always break
I cant wait to see this done, when you shown this car as the new project I've been super excited
Loving this build!
Bro. I'm so happy for you. almost 40k views?! Movin' on up my friend. STAY COMMITTED
I had the same issue with my rear suspension on my integra. So I was running coilovers in the front and stock suspension in the back until I decided to go mayhem and just grind off the fork part. The bolt was completely seized onto the bushing
Funny that I accidentally clicked on to this vids then actually started to really like them 😂😂
Good videos mate 👌👌
Yup old rusty parts suck to remove. Currently fixing up a crx and have been pretty lucky with stuck or broken bolts so far
Stance nation!!! This is so sick 👌
Had to rewatch this awesome video because I just bought a set for my daily hopefully I dont regret it..
Should rename it project deathWISH
Please keep up these videos because I have the body style after this (ek) and I’m broke so what I can’t do you do and it inspires me love your videos
Hey, wassaaaa ma dude... just dropping by to let you know about the lower control arm on the back had the same problem on my dc2 twice... dont sweat it and buy a shock and lower control arm for it .. bushing just turn into dust because its rust welded .. i had to even cut the shock bottom where it bolts up on my first time .. so just get used or new parts maybe aftermarket control arms for your next video :) hope you get it.(and no torch wont work tried everything also
looks clean my man. cant wait for the bondo booty to be all finished up👌🏻
I used to take the top hat off and then took the strut out,makes it safe if you don't have a spring compresser
Wow, your videos getting better and better! Good job.
Love the vids, keep it up, 100k isn’t far away!
I did not know those kind of sleeves even existed. Here in Germany those kinda things are not allowed. We have to many regulations on our car building game if we can call it that.
Always love to watch your videos and am always psyched to see that you've uploaded a new one. :)
Love the vids man keep them coming!!
I’m just gonna stay in my subscription box and wait for the next one.
Love this series.
Give it another year or so workin on these Hondas and youll kno everything there is to kno about em. Also a really good priced strut for these Eg's and Ek's is the Koni Orange or yello. Or Ktuned coils if you dont worry about price
Hands down the best series on RUclips
thats insane😍 never imagined getting to the point where people actually care about my builds
Sleeves were the thing back in the day. People still build them. Skunk2 sleeves and Koni struts were a quality setup.
Just keeps getting better!
Besides Gingium drift truck project, this one counts too as one of the most interesting project on youtube.
I just got offered a Civic to buy and I defiantly gonna pull the trigger on it after watching your videos, it’s beat up as hell and it’s automatic but ima make it good looking for a beater, btw Robbie we gonna be battling the best cheap civic build 😤😤Ima be wider and ima run my 16x10 deep dish steelies 😂
dont let the civic get to you lol its looking great so far so keep up the awesome work. I noticed under your eyes you had some blue so yeah it does show up sometimes.
Might as well sub, I enjoy watching your Eg Hatch videos, I'm sure going to try the garage door seals and coil sleeves on my first car.
I'm planning to install coilover sleeves on my stock CRV 99 shock absorber. Would you recommend this or lowering spring would be better? I can't afford coilovers just yet as of now. Thank you so much!
ur the best car youtuber! #love #notification squad
I just installed these on my 98 civic & did a full send lowering them to the 40 mark. My tires rub lol
Can't believe this series hasn't been done before
you can make decent diy performance coilovers using name brand struts, qa1 sleeves and eibach/ bilstien/other name brand springs just way more expensive than ebay stuff lol
The only time I’ve seen the same sort of setup was on an eg civic here in Ireland with like an airbag replacing the spring on the strut
the civic is looking awesome. hope you fix the bolt problem
I had a feeling those bolts were going to snap because its 90% chance they will lol. Both of my bolts in the rear forks snapped but luckily i had few bolts lying around and had brand new skunk2 lca (replicas). If you had a angle grinder all you needed to do is cut the bolt and get a hammer and a drift pin and wack it out :P
I bet you'll be at 100k by September latest, also I have done coils on probably 5 different civics/integra and on all 5 I snapped the rear control arm bolts lol
I was wondering if these coil sleeves would fit a 03 tiburon. On Amazon it says it won't but it might fit with drilling it out or something. Plz help
that looks so cool
I want to learn about modding and cars in general what are good channels besides this amazing one
Every civic that exist sucks to work on, but still fun to build, hope to see the hatch till the end 😁
How long does this job take? I bought a set and putting them on a 2015 Honda civic
Yo! civic looks dope
I had a similar problem. I fixed a ball bearing press to knuckle bolt. This didn't work.
How long did it take you guys to do all that work?
Subbed to the civic.
Do a spoon style wing would be awesome if it is the carbon fiber one
Thanks for the video. Want to put sleeves on my daily EG
nooo the ending triggered me 😭😂
How do they ride? I’m thinking on getting some for my golf mk2
Lol Honda probs bro haha ran into the same thing with my integra but when all said and done still could be take it home because my rims didn't clear the caliper 12 hours later lmao
Like before starting the Video! Stay Commited!😍
❤️
Where did u get ur civic from? i cant find any in BC ughh
Never give up... NEVER SURRENDER!!!
Very nice video!
Very common problem with those braking bolts in the rear, all you have to do is remove whole lower control arm with coil atached
Have fun with the rest of it
heyy you guys think those work in hyundai elantra 2004??