Lekker video gents 🙏🏽, but assablief don't weld on shocks bru, any halfway decent weld will generate enough heat to expand the oil enough to burst the semi-molten steel of the shock body and with any luck it'll just spatter and leak oil everywhere, so just be careful on that nomme ouens man assablief for safety sake 🙏🏽, that goes with any sealed system
I’m honestly not a big fan of these bro. The quality of the sleeve is very weak. But if you have to choose between a drop kit and these, the up side of the sleeve will be that you have the adjustability. I still recommend a decent set of entry level coilovers
I see how the sleeve is now coiled out and has no more thread for lower lows. Perhaps shorter or compressed springs would be ideal. I remember how even when I had a Polo on a Maxtrac kit which was probably 50mm. I couldn't go lower until I had custom springs made which showed other crap 😔
The spring rate on these springs are not ideal, they’re very stiff. Shortened shocks would be ideal to get more lows from this setup as well as a shorter spring as you mentioned! Thanks for watching! 🙌🏽🙌🏽🙌🏽
Buddy i have a set of 40mm lowering springs i wanted to know will u please install it for me please let me know u can tell me in person how much will u ask to install it for me thanx.
Broken law always doing amazing work and giving great insight and ideas.
Keep it up guys 👊🏼
finally a video of a sleeve install on a polo 🙌 one question, must the stock strut be removed from the shock?
No one ever replied... Yes the spring must be removed and it's place is taken by the sleeve over
Watching this a 2am🥺😂🍷
Just another day at the Broken Law Garage. 👨🏭
Lekker video gents 🙏🏽, but assablief don't weld on shocks bru, any halfway decent weld will generate enough heat to expand the oil enough to burst the semi-molten steel of the shock body and with any luck it'll just spatter and leak oil everywhere, so just be careful on that nomme ouens man assablief for safety sake 🙏🏽, that goes with any sealed system
Was thinking of getting these in my Mk1, don't know how good it is though.
I’m honestly not a big fan of these bro. The quality of the sleeve is very weak. But if you have to choose between a drop kit and these, the up side of the sleeve will be that you have the adjustability. I still recommend a decent set of entry level coilovers
How did you install the sleeve at the rear?
Cool video
We did some crazy stuff a few years ago 😂 glad you enjoyed the content 🙏🏽 Hope you enjoy the recent videos too 🇿🇦
Lekka vid bro🙌🏻 keep it up
How do you install sleeve in the rear???
Very informative
Thank you! 🙏🏽
I see how the sleeve is now coiled out and has no more thread for lower lows. Perhaps shorter or compressed springs would be ideal. I remember how even when I had a Polo on a Maxtrac kit which was probably 50mm. I couldn't go lower until I had custom springs made which showed other crap 😔
The spring rate on these springs are not ideal, they’re very stiff. Shortened shocks would be ideal to get more lows from this setup as well as a shorter spring as you mentioned! Thanks for watching! 🙌🏽🙌🏽🙌🏽
Does the car bounce?
What about the rear?
Hi can u but that sleeves in a golf 5 also?
Vat vol Mnr 😂😂😂🏁
Hi hows the ride quality of universal sleeve overs? My are cut at the moment its bad I mean really bad
Best advice that I can give you is to buy coilovers. These sleeve overs does not drive nice in a Polo especially if it’s low.
Gran your content 🤙
Thanks man! 🙌🏽 We hope to keep you entertained for a very long time!
Lokkl That Polo Sounds Like A Velo🤣
Wen can I brng da 6n polo classic for a quote ash
What polo is that
Any specific reason why you mounted the droplink towards the rear not the front? 4:37
Whoever did the first job is a bunch of nutters 🤯 you used abit more common sense 👍🏼
Leka mybru man j doen n decent job n j klink soes n funny guy salutas.
Salutas guy! Shot for watching! 🙌🏽
Buddy i have a set of 40mm lowering springs i wanted to know will u please install it for me please let me know u can tell me in person how much will u ask to install it for me thanx.
U can whatsapp me in 062 079 7370
Hi I want to install sleeves overs on my golf 6 1.4 tsi how can I get in contact with you