fastst1 the next step is going into a kettle to cure the rubber that was just put in. It cures to about the same texture and consistency as the rest of the tire
You have damaged far too much ply on that bias tire making the injury. Bigger than needed.also always cut out the separation out before buffing the area around it.if the separation goes past fixable all your buff time has been wasted on junk costing u big money
umm... why not leave outside ply alone and just patch inside? seems as though you lost integrity of tire by gouging out the outside... by the time the weight of machine is back on the tire it will mash the "gum" out as soft as it is..
some patches and smaller rubber spots can be done chemically, larger ones are done with heat either from a large heating pad or in what is basically a giant pressure cooker
tires like this are easily in the 4-5 figures but besides the cost, time is where patching those is worthwhile. Usually those tires aren't laying around in a warehouse and are delivered via overnight so expect delivery times of a week or more, and thats where ultimately repairing them is saving them money.
Not sure about that tire but a new cheap tire from China for our log skidder was 12k, in the end run it was cheaper for us to buy a skidder of the same model with a blown engine than it was to buy new tires
Legend has it that the customer is still waiting for his tire to be repaired. 🚴♂️ (And the shop sold him a new one for $4000 to keep his equipment running.)
And this, kids, is why you study hard and take more math, because otherwise you'll have to make your living doing hot, nasty, dirty work like this. And after breathing in all of that carcinogenic shit all day every day, you'll live to about 40.
Great! Thanks for unfinished video, now i'm left with a soft cushion gum tire :/
One of the best ASMR videos ever.
Bet that guy has one hell of a handshake!
thank you from Seguin Tire. everything was very impressive
Great, good job
theeeee Quietest workshop in the known world
one of the greatest cliffhangers of all time.
LOL.
what the hell thats not over, whats next?!
Que tipo de cocimiento utilizan de resistencias o vapor a precion?
🙋♂️👍tolle Arbeit
Ob diese Reparatur noch heiss vulkanisiert ????
Vor allem wie heißt das Gummi was er dort einrollt
nicely done
So that big outter hole is filled with this ultra-solf gum?
what's the next step? that gooey gum rubber won't hold up.
fastst1 the next step is going into a kettle to cure the rubber that was just put in. It cures to about the same texture and consistency as the rest of the tire
i have seen new otr tires being repaired. thanks......
You still have not seen an OTR repair.
Wow Keren .....
You have damaged far too much ply on that bias tire making the injury. Bigger than needed.also always cut out the separation out before buffing the area around it.if the separation goes past fixable all your buff time has been wasted on junk costing u big money
Do you offer educational courses?
In repairing tires
Essa borracha endurece🤔?
Sir I required GTR Radial repair unit so how to connect you
Cool
I have ideas about this repairs but I need help to get job
Holy shit that's a lot of work to fix a tire.
Those tyres are tens of thousands of dollars each
I am instructed for otr tyre repair job
you damage the good area also
anyway weas all the jobs like this in nz
Hi guys can you make a video showing what happens for curing the patch?
What does the stitching do?
you need to apply mechanical pressure so the rubber adheres and cures properly, if not it comes out looking like an aero bar
Vent yarn for what does anyone knows?
helps evacuate the fumes during the curing time. so you don't get air pockets
And i do this repair job everyday
umm... why not leave outside ply alone and just patch inside? seems as though you lost integrity of tire by gouging out the outside... by the time the weight of machine is back on the tire it will mash the "gum" out as soft as it is..
So this is the original video...
Pernah bekerja begini
Instructive..."la-demo"&(le.savoir-faire./"manutention".(la)...
wtf tough job
Would there not be a soft spot in tire after that soft outer repair
Pretty sure that the soft material chemically or heat cures into solid rubber
some patches and smaller rubber spots can be done chemically, larger ones are done with heat either from a large heating pad or in what is basically a giant pressure cooker
kelamaan boss...
This seems to be time consuming... is it worth the cost? I mean, how much does cost to buy a new tyre, compared to this solution?
Those tyres are VERY expensive
tires like this are easily in the 4-5 figures but besides the cost, time is where patching those is worthwhile. Usually those tires aren't laying around in a warehouse and are delivered via overnight so expect delivery times of a week or more, and thats where ultimately repairing them is saving them money.
Not sure about that tire but a new cheap tire from China for our log skidder was 12k, in the end run it was cheaper for us to buy a skidder of the same model with a blown engine than it was to buy new tires
generally it is worth the cost to repair, there are also other patch types that are less time consuming to install.
How to repair tire hole:
Step 1 - Make way bigger hole
Just because you want to watch more of this doesn't mean the fix isn't over.
on tą gumę jak kebaba na końcu kroi :D
Dear shit, how much is a new tire?
$42,499.75
Well THAT looks tedious.. Yikes.
Legend has it that the customer is still waiting for his tire to be repaired. 🚴♂️
(And the shop sold him a new one for $4000 to keep his equipment running.)
you missed a zero on that price
wow.... bro, way to far on the buffing out for patch shouldve just took liner out the a lite buzz
Anyone else get their ASMR triggered?
Could have just used fix-a-flat. Just saying...
just buy a new tire
they are not 50k each, those tires are around 15k each still pricy though
Was looking forward to see the finished result, wasted 15 minutes
i would have bought a tire
oh yeah, we have just $42,499 lying around. LMAO
+ArtDreams Studio sounds like getto fabulous. Buy the Bentley but not enough $$$ for the gas.
Holy crap buddy you must be stone deaf to run all those screaming air tools with no hearing protection
dunno why I watch this video till end
And this, kids, is why you study hard and take more math, because otherwise you'll have to make your living doing hot, nasty, dirty work like this. And after breathing in all of that carcinogenic shit all day every day, you'll live to about 40.
I
what i see on this section repair now the tire lost the quality of tire because this guy destroy inner line of tire i call bad repair